From: Chien Tung Date: Wed, 9 Dec 2009 23:21:56 +0000 (-0800) Subject: RDMA/nes: Add additional SFP+ PHY uC status check and PHY reset X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a276510328d0721c252b37044c51e2fb4efe0364;p=linux-beck.git RDMA/nes: Add additional SFP+ PHY uC status check and PHY reset Add additional PHY uC status check in case PHY firmware is not running properly with heartbeat. Add a hard PHY reset if uC status is 0x0 after initial reset. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier --- diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 3d9bbff4f7ac..b59ca5659423 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -1356,6 +1356,8 @@ int nes_init_phy(struct nes_device *nesdev) } if ((phy_type == NES_PHY_TYPE_ARGUS) || (phy_type == NES_PHY_TYPE_SFP_D)) { + u32 first_time = 1; + /* Check firmware heartbeat */ nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee); temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); @@ -1363,8 +1365,13 @@ int nes_init_phy(struct nes_device *nesdev) nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee); temp_phy_data2 = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); - if (temp_phy_data != temp_phy_data2) - return 0; + if (temp_phy_data != temp_phy_data2) { + nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7fd); + temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + if ((temp_phy_data & 0xff) > 0x20) + return 0; + printk(PFX "Reinitializing PHY\n"); + } /* no heartbeat, configure the PHY */ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0x0000, 0x8000); @@ -1400,7 +1407,7 @@ int nes_init_phy(struct nes_device *nesdev) temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); do { if (counter++ > 150) { - nes_debug(NES_DBG_PHY, "No PHY heartbeat\n"); + printk(PFX "No PHY heartbeat\n"); break; } mdelay(1); @@ -1414,11 +1421,20 @@ int nes_init_phy(struct nes_device *nesdev) nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7fd); temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); if (counter++ > 300) { - nes_debug(NES_DBG_PHY, "PHY did not track\n"); - break; + if (((temp_phy_data & 0xff) == 0x0) && first_time) { + first_time = 0; + counter = 0; + /* reset AMCC PHY and try again */ + nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0xe854, 0x00c0); + nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0xe854, 0x0040); + continue; + } else { + printk(PFX "PHY did not track\n"); + break; + } } mdelay(10); - } while (((temp_phy_data & 0xff) != 0x50) && ((temp_phy_data & 0xff) != 0x70)); + } while ((temp_phy_data & 0xff) < 0x30); /* setup signal integrity */ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd003, 0x0000);