From: Brandon Philips Date: Wed, 16 Jun 2010 16:21:58 +0000 (+0000) Subject: sky2: enable rx/tx in sky2_phy_reinit() X-Git-Tag: v2.6.34.2~175 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a2f0548b8b7f86d518a7f998fe1451367c9f9b56;p=karo-tx-linux.git sky2: enable rx/tx in sky2_phy_reinit() commit 38000a94a902e94ca8b5498f7871c6316de8957a upstream. sky2_phy_reinit is called by the ethtool helpers sky2_set_settings, sky2_nway_reset and sky2_set_pauseparam when netif_running. However, at the end of sky2_phy_init GM_GP_CTRL has GM_GPCR_RX_ENA and GM_GPCR_TX_ENA cleared. So, doing these commands causes the device to stop working: $ ethtool -r eth0 $ ethtool -A eth0 autoneg off Fix this issue by enabling Rx/Tx after running sky2_phy_init in sky2_phy_reinit. Signed-off-by: Brandon Philips Tested-by: Brandon Philips Cc: stable@kernel.org Tested-by: Mike McCormack Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c5d83f55bac3..e89875bbbdcb 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -720,11 +720,24 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } +/* Enable Rx/Tx */ +static void sky2_enable_rx_tx(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 reg; + + reg = gma_read16(hw, port, GM_GP_CTRL); + reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; + gma_write16(hw, port, GM_GP_CTRL, reg); +} + /* Force a renegotiation */ static void sky2_phy_reinit(struct sky2_port *sky2) { spin_lock_bh(&sky2->phy_lock); sky2_phy_init(sky2->hw, sky2->port); + sky2_enable_rx_tx(sky2); spin_unlock_bh(&sky2->phy_lock); } @@ -2002,7 +2015,6 @@ static void sky2_link_up(struct sky2_port *sky2) { struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u16 reg; static const char *fc_name[] = { [FC_NONE] = "none", [FC_TX] = "tx", @@ -2010,10 +2022,7 @@ static void sky2_link_up(struct sky2_port *sky2) [FC_BOTH] = "both", }; - /* enable Rx/Tx */ - reg = gma_read16(hw, port, GM_GP_CTRL); - reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; - gma_write16(hw, port, GM_GP_CTRL, reg); + sky2_enable_rx_tx(sky2); gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);