From: Sebastian Andrzej Siewior Date: Fri, 11 May 2012 16:30:46 +0000 (+0000) Subject: e1000: look in the page and not in skb->data for the last byte X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a3060858c207d944194a30478d30d3e1822e23f3;p=linux-beck.git e1000: look in the page and not in skb->data for the last byte The code seems to want to look at the last byte where the HW puts some information. Since the skb->data area is never seen by the HW I guess it does not work as expected. We pass the page address to the HW so I *think* in order to get to the last byte where the information might be one should use the page buffer and take a look. This is of course not more than just compile tested. Signed-off-by: Sebastian Andrzej Siewior Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index fefbf4d66e18..37b7d1c90723 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -4066,7 +4066,11 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, /* errors is only valid for DD + EOP descriptors */ if (unlikely((status & E1000_RXD_STAT_EOP) && (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) { - u8 last_byte = *(skb->data + length - 1); + u8 *mapped; + u8 last_byte; + + mapped = page_address(buffer_info->page); + last_byte = *(mapped + length - 1); if (TBI_ACCEPT(hw, status, rx_desc->errors, length, last_byte)) { spin_lock_irqsave(&adapter->stats_lock,