From: Shawn Guo <shawn.guo@freescale.com>
Date: Fri, 14 Jan 2011 07:25:52 +0000 (+0800)
Subject: ARM: mxs/mx28evk: read fec mac address from ocotp
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a320b2793dae44953dc58e9f681d8f161eb5b3ab;p=linux-beck.git

ARM: mxs/mx28evk: read fec mac address from ocotp

Read fec mac address from ocotp and save it into fec_platform_data
mac field for fec driver to use.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---

diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 8e2c5975001e..e8db99fabc48 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -119,7 +119,7 @@ static void __init mx28evk_fec_reset(void)
 	gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
 }
 
-static struct fec_platform_data mx28_fec_pdata[] = {
+static struct fec_platform_data mx28_fec_pdata[] __initdata = {
 	{
 		/* fec0 */
 		.phy = PHY_INTERFACE_MODE_RMII,
@@ -129,12 +129,45 @@ static struct fec_platform_data mx28_fec_pdata[] = {
 	},
 };
 
+static int __init mx28evk_fec_get_mac(void)
+{
+	int i;
+	u32 val;
+	const u32 *ocotp = mxs_get_ocotp();
+
+	if (!ocotp)
+		goto error;
+
+	/*
+	 * OCOTP only stores the last 4 octets for each mac address,
+	 * so hard-code Freescale OUI (00:04:9f) here.
+	 */
+	for (i = 0; i < 2; i++) {
+		val = ocotp[i * 4];
+		mx28_fec_pdata[i].mac[0] = 0x00;
+		mx28_fec_pdata[i].mac[1] = 0x04;
+		mx28_fec_pdata[i].mac[2] = 0x9f;
+		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
+		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
+		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
+	}
+
+	return 0;
+
+error:
+	pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__);
+	return -ETIMEDOUT;
+}
+
 static void __init mx28evk_init(void)
 {
 	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
 
 	mx28_add_duart();
 
+	if (mx28evk_fec_get_mac())
+		pr_warn("%s: failed on fec mac setup\n", __func__);
+
 	mx28evk_fec_reset();
 	mx28_add_fec(0, &mx28_fec_pdata[0]);
 	mx28_add_fec(1, &mx28_fec_pdata[1]);