From: Jes Sorensen Date: Mon, 29 Feb 2016 22:05:16 +0000 (-0500) Subject: rtl8xxxu: Setup coex table correctly (hopefully) X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a3a5dac6b1bf69b1d90f3293abfb4392ec2fc68f;p=linux-beck.git rtl8xxxu: Setup coex table correctly (hopefully) Use the same values as the vendor driver when setting up the BTCOEX table for 8723bu. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index 5b74ba114d53..3e99a17c7962 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -5842,6 +5842,7 @@ static void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0e); } +#ifdef NEED_PS_TDMA static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv, u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5) { @@ -5856,6 +5857,7 @@ static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv, h2c.b_type_dma.data5 = arg5; rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_type_dma)); } +#endif static void rtl8723bu_init_bt(struct rtl8xxxu_priv *priv) { @@ -5944,18 +5946,20 @@ static void rtl8723bu_init_bt(struct rtl8xxxu_priv *priv) /* * Software control, antenna at WiFi side */ +#ifdef NEED_PS_TDMA rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00); +#endif + + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555); + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555); + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff); + rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03); memset(&h2c, 0, sizeof(struct h2c_cmd)); h2c.bt_info.cmd = H2C_8723B_BT_INFO; h2c.bt_info.data = BIT(0); rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info)); - rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555); - rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x5a5a5a5a); - rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff); - rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03); - memset(&h2c, 0, sizeof(struct h2c_cmd)); h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT; h2c.ignore_wlan.data = 0;