From: Archit Taneja Date: Thu, 9 Jun 2016 11:37:25 +0000 (+0530) Subject: dt-bindings: msm/dsi: Some binding doc cleanups X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a3c463e0961c924aaeb64274906343ee2b814d99;p=linux-beck.git dt-bindings: msm/dsi: Some binding doc cleanups Some cleanups: - Use simpler names for DT nodes in the example - Use references instead of dumping Document links everywhere Acked-by: Rob Herring Signed-off-by: Archit Taneja Signed-off-by: Rob Clark --- diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index f458929324aa..6b1cab17f52d 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -11,7 +11,7 @@ Required properties: be 0 or 1, since we have 2 DSI controllers at most for now. - interrupts: The interrupt signal from the DSI block. - power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks +- clocks: Phandles to device clocks. - clock-names: the following clocks are required: * "mdp_core_clk" * "iface_clk" @@ -24,8 +24,7 @@ Required properties: * "src_clk" - assigned-clocks: Parents of "byte_clk" and "pixel_clk" for the given platform. - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided - by a DSI PHY block. - See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. + by a DSI PHY block. See [1] for details on clock bindings. - vdd-supply: phandle to vdd regulator device node - vddio-supply: phandle to vdd-io regulator device node - vdda-supply: phandle to vdda regulator device node @@ -33,15 +32,11 @@ Required properties: - phy-names: the name of the corresponding PHY device - syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2) - ports: Contains 2 DSI controller ports as child nodes. Each port contains - an endpoint subnode as defined in these documents: - - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt + an endpoint subnode as defined in [2] and [3]. Optional properties: - panel@0: Node of panel connected to this DSI controller. - See files in Documentation/devicetree/bindings/display/panel/ for each supported - panel. + See files in [4] for each supported panel. - qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is driving a panel which needs 2 DSI links. - qcom,master-dsi: Boolean value indicating if the DSI controller is driving @@ -58,15 +53,15 @@ Optional properties: DSI Endpoint properties: - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's - input endpoint. For port@1, set to the MDP interface output. - See Documentation/devicetree/bindings/graph.txt for device graph info. + input endpoint. For port@1, set to the MDP interface output. See [2] for + device graph info. - data-lanes: this describes how the physical DSI data lanes are mapped to the logical lanes on the given platform. The value contained in index n describes what physical lane is mapped to the logical lane n (DATAn, where n lies between 0 and 3). The clock lane position is fixed - and can't be changed. Hence, they aren't a part of the DT bindings. For - more info, see Documentation/devicetree/bindings/media/video-interfaces.txt + and can't be changed. Hence, they aren't a part of the DT bindings. See + [3] for more info on the data-lanes property. For example: @@ -104,8 +99,7 @@ Required properties: - qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should be 0 or 1, since we have 2 DSI PHYs at most for now. - power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. +- clocks: Phandles to device clocks. See [1] for details on clock bindings. - clock-names: the following clocks are required: * "iface_clk" - vddio-supply: phandle to vdd-io regulator device node @@ -114,11 +108,16 @@ Optional properties: - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY regulator is wanted. +[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt +[2] Documentation/devicetree/bindings/graph.txt +[3] Documentation/devicetree/bindings/media/video-interfaces.txt +[4] Documentation/devicetree/bindings/display/panel/ + Example: - mdss_dsi0: qcom,mdss_dsi@fd922800 { + dsi0: dsi@fd922800 { compatible = "qcom,mdss-dsi-ctrl"; qcom,dsi-host-index = <0>; - interrupt-parent = <&mdss_mdp>; + interrupt-parent = <&mdp>; interrupts = <4 0>; reg-names = "dsi_ctrl"; reg = <0xfd922800 0x200>; @@ -144,14 +143,14 @@ Example: <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; assigned-clock-parents = - <&mdss_dsi_phy0 0>, - <&mdss_dsi_phy0 1>; + <&dsi_phy0 0>, + <&dsi_phy0 1>; vdda-supply = <&pma8084_l2>; vdd-supply = <&pma8084_l22>; vddio-supply = <&pma8084_l12>; - phys = <&mdss_dsi_phy0>; + phys = <&dsi_phy0>; phy-names ="dsi-phy"; qcom,dual-dsi-mode; @@ -159,8 +158,8 @@ Example: qcom,sync-dual-dsi; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mdss_dsi_active>; - pinctrl-1 = <&mdss_dsi_suspend>; + pinctrl-0 = <&dsi_active>; + pinctrl-1 = <&dsi_suspend>; ports { #address-cells = <1>; @@ -198,7 +197,7 @@ Example: }; }; - mdss_dsi_phy0: qcom,mdss_dsi_phy@fd922a00 { + dsi_phy0: dsi-phy@fd922a00 { compatible = "qcom,dsi-phy-28nm-hpm"; qcom,dsi-phy-index = <0>; reg-names =