From: Tai-hwa Liang Date: Mon, 26 Mar 2012 00:16:36 +0000 (-0700) Subject: Input: sentelic - enabling absolute coordinates output for newer hardware X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a4c85075f00d56b38f5c277ab89f9aaad69eb17b;p=mv-sheeva.git Input: sentelic - enabling absolute coordinates output for newer hardware - Hooking multi-finger coordinates output with kernel multitouch library; - Enabling absolute coordinates output for Cx+ hardware. The older hardware performs much better in relative mode; thus relative mode related code are preserved. Part of the code is based on the work done by Oskari Saarenmaa , which was used to support the clickpad found on ASUS UX21/31 Ultrabook. On the other hand, the FSP found on UX21/31 doesn't have hardware capability register other than PnP ID, which means that we'll have to figure out an alternative approach to identify such pad correctly; otherwise, blindly adding INPUT_PROP_BUTTONPAD property may compatability issues amongst existing FSPs. Signed-off-by: Tai-hwa Liang Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 62fa6982567..5ea5c689d26 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2012 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -21,6 +21,7 @@ #include #include +#include #include #include #include @@ -643,12 +644,24 @@ static void fsp_packet_debug(unsigned char packet[]) } #endif +static void fsp_set_slot(struct input_dev *dev, int slot, bool active, + unsigned int x, unsigned int y) +{ + input_mt_slot(dev, slot); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); + if (active) { + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); + } +} + static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; struct fsp_data *ad = psmouse->private; unsigned char *packet = psmouse->packet; unsigned char button_status = 0, lscroll = 0, rscroll = 0; + unsigned short abs_x, abs_y, fgrs = 0; int rel_x, rel_y; if (psmouse->pktcnt < 4) @@ -660,8 +673,66 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) switch (psmouse->packet[0] >> FSP_PKT_TYPE_SHIFT) { case FSP_PKT_TYPE_ABS: - psmouse_warn(psmouse, - "Unexpected absolute mode packet, ignored.\n"); + abs_x = (packet[1] << 2) | ((packet[3] >> 2) & 0x03); + abs_y = (packet[2] << 2) | (packet[3] & 0x03); + + if (packet[0] & FSP_PB0_MFMC) { + /* + * MFMC packet: assume that there are two fingers on + * pad + */ + fgrs = 2; + + /* MFMC packet */ + if (packet[0] & FSP_PB0_MFMC_FGR2) { + /* 2nd finger */ + if (ad->last_mt_fgr == 2) { + /* + * workaround for buggy firmware + * which doesn't clear MFMC bit if + * the 1st finger is up + */ + fgrs = 1; + fsp_set_slot(dev, 0, false, 0, 0); + } + ad->last_mt_fgr = 2; + + fsp_set_slot(dev, 1, fgrs == 2, abs_x, abs_y); + } else { + /* 1st finger */ + if (ad->last_mt_fgr == 1) { + /* + * workaround for buggy firmware + * which doesn't clear MFMC bit if + * the 2nd finger is up + */ + fgrs = 1; + fsp_set_slot(dev, 1, false, 0, 0); + } + ad->last_mt_fgr = 1; + fsp_set_slot(dev, 0, fgrs != 0, abs_x, abs_y); + } + } else { + /* SFAC packet */ + + /* no multi-finger information */ + ad->last_mt_fgr = 0; + + if (abs_x != 0 && abs_y != 0) + fgrs = 1; + + fsp_set_slot(dev, 0, fgrs > 0, abs_x, abs_y); + fsp_set_slot(dev, 1, false, 0, 0); + } + if (fgrs > 0) { + input_report_abs(dev, ABS_X, abs_x); + input_report_abs(dev, ABS_Y, abs_y); + } + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + input_report_key(dev, BTN_TOUCH, fgrs); + input_report_key(dev, BTN_TOOL_FINGER, fgrs == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fgrs == 2); break; case FSP_PKT_TYPE_NORMAL_OPC: @@ -785,6 +856,17 @@ static int fsp_activate_protocol(struct psmouse *psmouse) /* Enable on-pad vertical and horizontal scrolling */ fsp_onpad_vscr(psmouse, true); fsp_onpad_hscr(psmouse, true); + } else { + /* Enable absolute coordinates output for Cx/Dx hardware */ + if (fsp_reg_write(psmouse, FSP_REG_SWC1, + FSP_BIT_SWC1_EN_ABS_1F | + FSP_BIT_SWC1_EN_ABS_2F | + FSP_BIT_SWC1_EN_FUP_OUT | + FSP_BIT_SWC1_EN_ABS_CON)) { + psmouse_err(psmouse, + "Unable to enable absolute coordinates output.\n"); + return -EIO; + } } return 0; @@ -801,6 +883,32 @@ static int fsp_set_input_params(struct psmouse *psmouse) __set_bit(BTN_FORWARD, dev->keybit); __set_bit(REL_WHEEL, dev->relbit); __set_bit(REL_HWHEEL, dev->relbit); + } else { + /* + * Hardware prior to Cx performs much better in relative mode; + * hence, only enable absolute coordinates output as well as + * multi-touch output for the newer hardware. + * + * Maximum coordinates can be computed as: + * + * number of scanlines * 64 - 57 + * + * where number of X/Y scanline lines are 16/12. + */ + int abs_x = 967, abs_y = 711; + + __set_bit(EV_ABS, dev->evbit); + __clear_bit(EV_REL, dev->evbit); + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_FINGER, dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); + __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); + + input_set_abs_params(dev, ABS_X, 0, abs_x, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, abs_y, 0, 0); + input_mt_init_slots(dev, 2); + input_set_abs_params(dev, ABS_MT_POSITION_X, 0, abs_x, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, abs_y, 0, 0); } return 0; diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h index 23bd25e539b..334de19e5dd 100644 --- a/drivers/input/mouse/sentelic.h +++ b/drivers/input/mouse/sentelic.h @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2012 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -55,6 +55,16 @@ #define FSP_BIT_FIX_HSCR BIT(5) #define FSP_BIT_DRAG_LOCK BIT(6) +#define FSP_REG_SWC1 (0x90) +#define FSP_BIT_SWC1_EN_ABS_1F BIT(0) +#define FSP_BIT_SWC1_EN_GID BIT(1) +#define FSP_BIT_SWC1_EN_ABS_2F BIT(2) +#define FSP_BIT_SWC1_EN_FUP_OUT BIT(3) +#define FSP_BIT_SWC1_EN_ABS_CON BIT(4) +#define FSP_BIT_SWC1_GST_GRP0 BIT(5) +#define FSP_BIT_SWC1_GST_GRP1 BIT(6) +#define FSP_BIT_SWC1_BX_COMPAT BIT(7) + /* Finger-sensing Pad packet formating related definitions */ /* absolute packet type */ @@ -64,6 +74,15 @@ #define FSP_PKT_TYPE_NORMAL_OPC (0x03) #define FSP_PKT_TYPE_SHIFT (6) +/* bit definitions for the first byte of report packet */ +#define FSP_PB0_LBTN BIT(0) +#define FSP_PB0_RBTN BIT(1) +#define FSP_PB0_MBTN BIT(2) +#define FSP_PB0_MFMC_FGR2 FSP_PB0_MBTN +#define FSP_PB0_MUST_SET BIT(3) +#define FSP_PB0_PHY_BTN BIT(4) +#define FSP_PB0_MFMC BIT(5) + /* hardware revisions */ #define FSP_VER_STL3888_A4 (0xC1) #define FSP_VER_STL3888_B0 (0xD0) @@ -89,6 +108,7 @@ struct fsp_data { unsigned char last_reg; /* Last register we requested read from */ unsigned char last_val; + unsigned int last_mt_fgr; /* Last seen finger(multitouch) */ }; #ifdef CONFIG_MOUSE_PS2_SENTELIC