From: Brian Niebuhr Date: Fri, 1 Oct 2010 08:30:48 +0000 (+0530) Subject: spi: davinci: fix DMA event generation stoppage X-Git-Tag: v2.6.38-rc1~454^2~6^2~13 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a4f4497b86a689aa8c827d4ebe0d00c4eba66f76;p=karo-tx-linux.git spi: davinci: fix DMA event generation stoppage Do not stop SPI DMA event generation in either transmit or receive DMA event call back because the single setting affects both transmit and receive event generation. Depending on the order in which the callbacks happen, transmit or receive events can get unintentionally stalled. Instead, disable event generation once after both the transmit and receive DMA completes. While at it, remove the largely under-used function to set or clear DMA event generation. Signed-off-by: Brian Niebuhr Tested-By: Michael Williamson Signed-off-by: Sekhar Nori --- diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 67f1e463c1f0..9695f98b03bd 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -211,16 +211,6 @@ static inline void clear_io_bits(void __iomem *addr, u32 bits) iowrite32(v, addr); } -static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable) -{ - struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); - - if (enable) - set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); - else - clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); -} - /* * Interface to control the chip select signal */ @@ -414,8 +404,6 @@ static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data) edma_clean_channel(davinci_spi_dma->dma_rx_channel); complete(&davinci_spi_dma->dma_rx_completion); - /* We must disable the DMA RX request */ - davinci_spi_set_dma_req(spi, 0); } static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data) @@ -433,8 +421,6 @@ static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data) edma_clean_channel(davinci_spi_dma->dma_tx_channel); complete(&davinci_spi_dma->dma_tx_completion); - /* We must disable the DMA TX request */ - davinci_spi_set_dma_req(spi, 0); } static int davinci_spi_request_dma(struct spi_device *spi) @@ -831,7 +817,7 @@ static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t) edma_start(davinci_spi_dma->dma_rx_channel); edma_start(davinci_spi_dma->dma_tx_channel); - davinci_spi_set_dma_req(spi, 1); + set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); wait_for_completion_interruptible(&davinci_spi_dma->dma_tx_completion); wait_for_completion_interruptible(&davinci_spi_dma->dma_rx_completion); @@ -841,6 +827,8 @@ static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t) dma_unmap_single(NULL, t->rx_dma, rx_buf_count, DMA_FROM_DEVICE); + clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); + /* * Check for bit error, desync error,parity error,timeout error and * receive overflow errors