From: Arun Chandran Date: Wed, 18 Feb 2015 11:29:35 +0000 (+0530) Subject: net: macb: Add big endian CPU support X-Git-Tag: v4.1-rc1~128^2~415 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a50dad355a53;p=karo-tx-linux.git net: macb: Add big endian CPU support This patch converts all __raw_readl and __raw_writel function calls to their corresponding readl_relaxed and writel_relaxed variants. It also tells the driver to set ahb_endian_swp_mgmt_en bit in dma_cfg when the CPU is configured in big endian mode. Signed-off-by: Arun Chandran Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index ad76b8e35a00..05fb36da0cff 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -449,7 +449,7 @@ static void macb_update_stats(struct macb *bp) WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4); for(; p < end; p++, reg++) - *p += __raw_readl(reg); + *p += readl_relaxed(reg); } static int macb_halt_tx(struct macb *bp) @@ -1585,7 +1585,11 @@ static void macb_configure_dma(struct macb *bp) if (bp->dma_burst_length) dmacfg = GEM_BFINS(FBLDO, bp->dma_burst_length, dmacfg); dmacfg |= GEM_BIT(TXPBMS) | GEM_BF(RXBMS, -1L); - dmacfg &= ~GEM_BIT(ENDIA); + dmacfg &= ~GEM_BIT(ENDIA_PKT); + /* Tell the chip to byteswap descriptors on big-endian hosts */ +#ifdef __BIG_ENDIAN + dmacfg |= GEM_BIT(ENDIA_DESC); +#endif if (bp->dev->features & NETIF_F_HW_CSUM) dmacfg |= GEM_BIT(TXCOEN); else @@ -1832,14 +1836,14 @@ static void gem_update_stats(struct macb *bp) for (i = 0; i < GEM_STATS_LEN; ++i, ++p) { u32 offset = gem_statistics[i].offset; - u64 val = __raw_readl(bp->regs + offset); + u64 val = readl_relaxed(bp->regs + offset); bp->ethtool_stats[i] += val; *p += val; if (offset == GEM_OCTTXL || offset == GEM_OCTRXL) { /* Add GEM_OCTTXH, GEM_OCTRXH */ - val = __raw_readl(bp->regs + offset + 4); + val = readl_relaxed(bp->regs + offset + 4); bp->ethtool_stats[i] += ((u64)val) << 32; *(++p) += val; } @@ -2191,12 +2195,14 @@ static void macb_probe_queues(void __iomem *mem, *num_queues = 1; /* is it macb or gem ? */ - mid = __raw_readl(mem + MACB_MID); + mid = readl_relaxed(mem + MACB_MID); + if (MACB_BFEXT(IDNUM, mid) != 0x2) return; /* bit 0 is never set but queue 0 always exists */ - *queue_mask = __raw_readl(mem + GEM_DCFG6) & 0xff; + *queue_mask = readl_relaxed(mem + GEM_DCFG6) & 0xff; + *queue_mask |= 0x1; for (hw_q = 1; hw_q < MACB_MAX_QUEUES; ++hw_q) diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 31dc080f2437..57f0a1a7415d 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -229,7 +229,8 @@ /* Bitfields in DMACFG. */ #define GEM_FBLDO_OFFSET 0 /* fixed burst length for DMA */ #define GEM_FBLDO_SIZE 5 -#define GEM_ENDIA_OFFSET 7 /* endian swap mode for packet data access */ +#define GEM_ENDIA_DESC_OFFSET 6 /* endian swap mode for management descriptor access */ +#define GEM_ENDIA_PKT_OFFSET 7 /* endian swap mode for packet data access */ #define GEM_ENDIA_SIZE 1 #define GEM_RXBMS_OFFSET 8 /* RX packet buffer memory size select */ #define GEM_RXBMS_SIZE 2 @@ -423,17 +424,17 @@ /* Register access macros */ #define macb_readl(port,reg) \ - __raw_readl((port)->regs + MACB_##reg) + readl_relaxed((port)->regs + MACB_##reg) #define macb_writel(port,reg,value) \ - __raw_writel((value), (port)->regs + MACB_##reg) + writel_relaxed((value), (port)->regs + MACB_##reg) #define gem_readl(port, reg) \ - __raw_readl((port)->regs + GEM_##reg) + readl_relaxed((port)->regs + GEM_##reg) #define gem_writel(port, reg, value) \ - __raw_writel((value), (port)->regs + GEM_##reg) + writel_relaxed((value), (port)->regs + GEM_##reg) #define queue_readl(queue, reg) \ - __raw_readl((queue)->bp->regs + (queue)->reg) + readl_relaxed((queue)->bp->regs + (queue)->reg) #define queue_writel(queue, reg, value) \ - __raw_writel((value), (queue)->bp->regs + (queue)->reg) + writel_relaxed((value), (queue)->bp->regs + (queue)->reg) /* Conditional GEM/MACB macros. These perform the operation to the correct * register dependent on whether the device is a GEM or a MACB. For registers