From: Johannes Berg Date: Wed, 19 Nov 2014 09:09:00 +0000 (+0100) Subject: iwlwifi: move firmware file format definitions to correct header X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a52703b2020f46d95e9f8e837615b5754c06a0ea;p=linux-beck.git iwlwifi: move firmware file format definitions to correct header The firmware file-format is described in iwl-fw-file.h, while the internal handling structures and functions are in iwl-fw.h. Fix the separation between the files by moving file format definitions to iwl-fw-file.h. Also add a missing description for a kernel-doc member, and it's not needed to include iwl-fw-file.h again from the code (thanks to Liad Kaufman). Signed-off-by: Johannes Berg Reviewed-by: Liad Kaufman Signed-off-by: Emmanuel Grumbach --- diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index d9fa8e034da2..249ed3bd18e2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -78,9 +78,6 @@ #include "iwl-config.h" #include "iwl-modparams.h" -/* private includes */ -#include "iwl-fw-file.h" - /****************************************************************************** * * module boiler plate diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h index 401f7be36b93..df5613a8be15 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h @@ -179,4 +179,187 @@ struct iwl_ucode_capa { __le32 api_capa; } __packed; +/** + * enum iwl_ucode_tlv_flag - ucode API flags + * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously + * was a separate TLV but moved here to save space. + * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID, + * treats good CRC threshold as a boolean + * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). + * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. + * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS + * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD + * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan + * offload profile config command. + * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six + * (rather than two) IPv6 addresses + * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element + * from the probe request template. + * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) + * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) + * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC + * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and + * P2P client interfaces simultaneously if they are in different bindings. + * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and + * P2P client interfaces simultaneously if they are in same bindings. + * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD + * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save + * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. + * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients + * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. + */ +enum iwl_ucode_tlv_flag { + IWL_UCODE_TLV_FLAGS_PAN = BIT(0), + IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1), + IWL_UCODE_TLV_FLAGS_MFP = BIT(2), + IWL_UCODE_TLV_FLAGS_P2P = BIT(3), + IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4), + IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7), + IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10), + IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12), + IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15), + IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16), + IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21), + IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22), + IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23), + IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24), + IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25), + IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26), + IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29), + IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30), +}; + +/** + * enum iwl_ucode_tlv_api - ucode api + * @IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID: wowlan config includes tid field. + * @IWL_UCODE_TLV_CAPA_EXTENDED_BEACON: Support Extended beacon notification + * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex + * @IWL_UCODE_TLV_API_CSA_FLOW: ucode can do unbind-bind flow for CSA. + * @IWL_UCODE_TLV_API_DISABLE_STA_TX: ucode supports tx_disable bit. + * @IWL_UCODE_TLV_API_LMAC_SCAN: This ucode uses LMAC unified scan API. + * @IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF: ucode supports disabling dummy notif. + * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time + * longer than the passive one, which is essential for fragmented scan. + */ +enum iwl_ucode_tlv_api { + IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID = BIT(0), + IWL_UCODE_TLV_CAPA_EXTENDED_BEACON = BIT(1), + IWL_UCODE_TLV_API_BT_COEX_SPLIT = BIT(3), + IWL_UCODE_TLV_API_CSA_FLOW = BIT(4), + IWL_UCODE_TLV_API_DISABLE_STA_TX = BIT(5), + IWL_UCODE_TLV_API_LMAC_SCAN = BIT(6), + IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF = BIT(7), + IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8), +}; + +/** + * enum iwl_ucode_tlv_capa - ucode capabilities + * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 + * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory + * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. + * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality + * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current + * tx power value into TPC Report action frame and Link Measurement Report + * action frame + * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current + * channel in DS parameter set element in probe requests. + * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in + * probe requests. + * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests + * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), + * which also implies support for the scheduler configuration command + * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching + * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command + */ +enum iwl_ucode_tlv_capa { + IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0), + IWL_UCODE_TLV_CAPA_LAR_SUPPORT = BIT(1), + IWL_UCODE_TLV_CAPA_UMAC_SCAN = BIT(2), + IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = BIT(6), + IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = BIT(8), + IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = BIT(9), + IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = BIT(10), + IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = BIT(11), + IWL_UCODE_TLV_CAPA_DQA_SUPPORT = BIT(12), + IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = BIT(13), + IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = BIT(18), +}; + +/* The default calibrate table size if not specified by firmware file */ +#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 +#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 +#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253 + +/* The default max probe length if not specified by the firmware file */ +#define IWL_DEFAULT_MAX_PROBE_LENGTH 200 + +/* + * For 16.0 uCode and above, there is no differentiation between sections, + * just an offset to the HW address. + */ +#define IWL_UCODE_SECTION_MAX 12 +#define IWL_API_ARRAY_SIZE 1 +#define IWL_CAPABILITIES_ARRAY_SIZE 1 +#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC + +/* uCode version contains 4 values: Major/Minor/API/Serial */ +#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) +#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) +#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) +#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) + +/* + * Calibration control struct. + * Sent as part of the phy configuration command. + * @flow_trigger: bitmap for which calibrations to perform according to + * flow triggers. + * @event_trigger: bitmap for which calibrations to perform according to + * event triggers. + */ +struct iwl_tlv_calib_ctrl { + __le32 flow_trigger; + __le32 event_trigger; +} __packed; + +enum iwl_fw_phy_cfg { + FW_PHY_CFG_RADIO_TYPE_POS = 0, + FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS, + FW_PHY_CFG_RADIO_STEP_POS = 2, + FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS, + FW_PHY_CFG_RADIO_DASH_POS = 4, + FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS, + FW_PHY_CFG_TX_CHAIN_POS = 16, + FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS, + FW_PHY_CFG_RX_CHAIN_POS = 20, + FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS, +}; + +#define IWL_UCODE_MAX_CS 1 + +/** + * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW. + * @cipher: a cipher suite selector + * @flags: cipher scheme flags (currently reserved for a future use) + * @hdr_len: a size of MPDU security header + * @pn_len: a size of PN + * @pn_off: an offset of pn from the beginning of the security header + * @key_idx_off: an offset of key index byte in the security header + * @key_idx_mask: a bit mask of key_idx bits + * @key_idx_shift: bit shift needed to get key_idx + * @mic_len: mic length in bytes + * @hw_cipher: a HW cipher index used in host commands + */ +struct iwl_fw_cipher_scheme { + __le32 cipher; + u8 flags; + u8 hdr_len; + u8 pn_len; + u8 pn_off; + u8 key_idx_off; + u8 key_idx_mask; + u8 key_idx_shift; + u8 mic_len; + u8 hw_cipher; +} __packed; + #endif /* __iwl_fw_file_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index 959a25a75f9d..eaf1ff04adb9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -69,118 +69,6 @@ #include "iwl-fw-file.h" -/** - * enum iwl_ucode_tlv_flag - ucode API flags - * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously - * was a separate TLV but moved here to save space. - * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID, - * treats good CRC threshold as a boolean - * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). - * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. - * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS - * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD - * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan - * offload profile config command. - * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six - * (rather than two) IPv6 addresses - * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element - * from the probe request template. - * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) - * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) - * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC - * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and - * P2P client interfaces simultaneously if they are in different bindings. - * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and - * P2P client interfaces simultaneously if they are in same bindings. - * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD - * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save - * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. - * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients - * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. - */ -enum iwl_ucode_tlv_flag { - IWL_UCODE_TLV_FLAGS_PAN = BIT(0), - IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1), - IWL_UCODE_TLV_FLAGS_MFP = BIT(2), - IWL_UCODE_TLV_FLAGS_P2P = BIT(3), - IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4), - IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7), - IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10), - IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12), - IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15), - IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16), - IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21), - IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22), - IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23), - IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24), - IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25), - IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26), - IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29), - IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30), -}; - -/** - * enum iwl_ucode_tlv_api - ucode api - * @IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID: wowlan config includes tid field. - * @IWL_UCODE_TLV_CAPA_EXTENDED_BEACON: Support Extended beacon notification - * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex - * @IWL_UCODE_TLV_API_CSA_FLOW: ucode can do unbind-bind flow for CSA. - * @IWL_UCODE_TLV_API_DISABLE_STA_TX: ucode supports tx_disable bit. - * @IWL_UCODE_TLV_API_LMAC_SCAN: This ucode uses LMAC unified scan API. - * @IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF: ucode supports disabling dummy notif. - * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time - * longer than the passive one, which is essential for fragmented scan. - */ -enum iwl_ucode_tlv_api { - IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID = BIT(0), - IWL_UCODE_TLV_CAPA_EXTENDED_BEACON = BIT(1), - IWL_UCODE_TLV_API_BT_COEX_SPLIT = BIT(3), - IWL_UCODE_TLV_API_CSA_FLOW = BIT(4), - IWL_UCODE_TLV_API_DISABLE_STA_TX = BIT(5), - IWL_UCODE_TLV_API_LMAC_SCAN = BIT(6), - IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF = BIT(7), - IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8), -}; - -/** - * enum iwl_ucode_tlv_capa - ucode capabilities - * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 - * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. - * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality - * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current - * tx power value into TPC Report action frame and Link Measurement Report - * action frame - * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current - * channel in DS parameter set element in probe requests. - * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in - * probe requests. - * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests - * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), - * which also implies support for the scheduler configuration command - * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching - * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command - */ -enum iwl_ucode_tlv_capa { - IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0), - IWL_UCODE_TLV_CAPA_UMAC_SCAN = BIT(2), - IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = BIT(6), - IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = BIT(8), - IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = BIT(9), - IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = BIT(10), - IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = BIT(11), - IWL_UCODE_TLV_CAPA_DQA_SUPPORT = BIT(12), - IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = BIT(13), - IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = BIT(18), -}; - -/* The default calibrate table size if not specified by firmware file */ -#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 -#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 -#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253 - -/* The default max probe length if not specified by the firmware file */ -#define IWL_DEFAULT_MAX_PROBE_LENGTH 200 - /** * enum iwl_ucode_type * @@ -208,14 +96,6 @@ enum iwl_ucode_sec { IWL_UCODE_SECTION_DATA, IWL_UCODE_SECTION_INST, }; -/* - * For 16.0 uCode and above, there is no differentiation between sections, - * just an offset to the HW address. - */ -#define IWL_UCODE_SECTION_MAX 12 -#define IWL_API_ARRAY_SIZE 1 -#define IWL_CAPABILITIES_ARRAY_SIZE 1 -#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC struct iwl_ucode_capabilities { u32 max_probe_length; @@ -243,66 +123,6 @@ struct iwl_sf_region { u32 size; }; -/* uCode version contains 4 values: Major/Minor/API/Serial */ -#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) -#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) -#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) -#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) - -/* - * Calibration control struct. - * Sent as part of the phy configuration command. - * @flow_trigger: bitmap for which calibrations to perform according to - * flow triggers. - * @event_trigger: bitmap for which calibrations to perform according to - * event triggers. - */ -struct iwl_tlv_calib_ctrl { - __le32 flow_trigger; - __le32 event_trigger; -} __packed; - -enum iwl_fw_phy_cfg { - FW_PHY_CFG_RADIO_TYPE_POS = 0, - FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS, - FW_PHY_CFG_RADIO_STEP_POS = 2, - FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS, - FW_PHY_CFG_RADIO_DASH_POS = 4, - FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS, - FW_PHY_CFG_TX_CHAIN_POS = 16, - FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS, - FW_PHY_CFG_RX_CHAIN_POS = 20, - FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS, -}; - -#define IWL_UCODE_MAX_CS 1 - -/** - * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW. - * @cipher: a cipher suite selector - * @flags: cipher scheme flags (currently reserved for a future use) - * @hdr_len: a size of MPDU security header - * @pn_len: a size of PN - * @pn_off: an offset of pn from the beginning of the security header - * @key_idx_off: an offset of key index byte in the security header - * @key_idx_mask: a bit mask of key_idx bits - * @key_idx_shift: bit shift needed to get key_idx - * @mic_len: mic length in bytes - * @hw_cipher: a HW cipher index used in host commands - */ -struct iwl_fw_cipher_scheme { - __le32 cipher; - u8 flags; - u8 hdr_len; - u8 pn_len; - u8 pn_off; - u8 key_idx_off; - u8 key_idx_mask; - u8 key_idx_shift; - u8 mic_len; - u8 hw_cipher; -} __packed; - /** * struct iwl_fw_cscheme_list - a cipher scheme list * @size: a number of entries @@ -329,6 +149,7 @@ struct iwl_fw_cscheme_list { * @inst_errlog_ptr: error log offfset for runtime ucode. * @mvm_fw: indicates this is MVM firmware * @cipher_scheme: optional external cipher scheme. + * @human_readable: human readable version */ struct iwl_fw { u32 ucode_ver;