From: Gabriele Paoloni Date: Sat, 16 Apr 2016 11:03:39 +0000 (+0100) Subject: PCI: designware: Remove incorrect RC memory base/limit configuration X-Git-Tag: v4.7-rc1~117^2~3^3 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a5cb903aef8c642e6f0f6810d46dacedf666b54a;p=karo-tx-linux.git PCI: designware: Remove incorrect RC memory base/limit configuration Currently dw_pcie_setup_rc() configures memory base and memory limit in the type1 configuration header for the root complex. In doing so it uses the CPU address (pp->mem_base) rather than the bus address (pp->mem_bus_addr). This is wrong and it is useless since the configuration is overwritten later on when pci_bus_assign_resources() is called. Remove this configuration from dw_pcie_setup_rc(). Signed-off-by: Gabriele Paoloni Signed-off-by: Bjorn Helgaas Acked-by: Pratyush Anand --- diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 261e4a1106df..aafd766546f3 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -708,8 +708,6 @@ static struct pci_ops dw_pcie_ops = { void dw_pcie_setup_rc(struct pcie_port *pp) { u32 val; - u32 membase; - u32 memlimit; /* set the number of lanes */ dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val); @@ -768,12 +766,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp) val |= 0x00010100; dw_pcie_writel_rc(pp, val, PCI_PRIMARY_BUS); - /* setup memory base, memory limit */ - membase = ((u32)pp->mem_base & 0xfff00000) >> 16; - memlimit = (pp->mem_size + (u32)pp->mem_base) & 0xfff00000; - val = memlimit | membase; - dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE); - /* setup command register */ dw_pcie_readl_rc(pp, PCI_COMMAND, &val); val &= 0xffff0000;