From: Simon Baatz <gmbnomis@gmail.com>
Date: Tue, 4 Jun 2013 21:32:32 +0000 (+0200)
Subject: arm: kirkwood: sheevaplug: move pinmux configs to the right devices
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a649277e79a5c28a94d258b5579b62daaf5ffd6d;p=linux-beck.git

arm: kirkwood: sheevaplug: move pinmux configs to the right devices

When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.

Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---

diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
index 9d5947599694..f7143f128504 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -44,10 +44,14 @@
 			};
 		};
 		serial@12000 {
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
 			status = "okay";
 		};
 
 		nand@3000000 {
+			pinctrl-0 = <&pmx_nand>;
+			pinctrl-names = "default";
 			status = "okay";
 
 			partition@0 {
@@ -71,6 +75,8 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
 
 		usb_power: regulator@1 {
 			compatible = "regulator-fixed";
@@ -84,14 +90,4 @@
 			gpio = <&gpio0 29 0>;
 		};
 	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		health {
-			label = "sheevaplug:blue:health";
-			gpios = <&gpio1 17 1>;
-			linux,default-trigger = "default-on";
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
index 1c6946a62aa9..f620ce48de97 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
@@ -15,15 +15,6 @@
 	compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
-
-			pinctrl-0 = < &pmx_nand &pmx_uart0
-				      &pmx_usb_power_enable
-				      &pmx_led_blue>;
-			pinctrl-names = "default";
-
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -37,4 +28,16 @@
 			wp-gpios = <&gpio1 15 0>;
 		};
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_blue>;
+		pinctrl-names = "default";
+
+		health {
+			label = "sheevaplug:blue:health";
+			gpios = <&gpio1 17 1>;
+			linux,default-trigger = "default-on";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
index f7684066f0ce..bf1dff251432 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
@@ -15,16 +15,6 @@
 	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
-
-			pinctrl-0 = < &pmx_nand &pmx_uart0
-				      &pmx_usb_power_enable
-				      &pmx_led_red
-				      &pmx_led_blue>;
-			pinctrl-names = "default";
-
-		};
-
 		mvsdio@90000 {
 			pinctrl-0 = <&pmx_sdio>;
 			pinctrl-names = "default";
@@ -36,6 +26,14 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
+		pinctrl-names = "default";
+
+		health {
+			label = "sheevaplug:blue:health";
+			gpios = <&gpio1 17 1>;
+			linux,default-trigger = "default-on";
+		};
 
 		misc {
 			label = "sheevaplug:red:misc";