From: Beniamino Galvani <b.galvani@gmail.com>
Date: Sat, 30 Aug 2014 12:50:26 +0000 (+0200)
Subject: mfd: rn5t618: Document device tree bindings
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a654f81640caa0bb648b0e45b792ba846c9bb02d;p=linux-beck.git

mfd: rn5t618: Document device tree bindings

This adds the device tree bindings documentation for Ricoh RN5T618.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---

diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
new file mode 100644
index 000000000000..937785a3eddc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -0,0 +1,36 @@
+* Ricoh RN5T618 PMIC
+
+Ricoh RN5T618 is a power management IC which integrates 3 step-down
+DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
+fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled
+through a I2C interface.
+
+Required properties:
+ - compatible: should be "ricoh,rn5t618"
+ - reg: the I2C slave address of the device
+
+Sub-nodes:
+ - regulators: the node is required if the regulator functionality is
+   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1,
+   LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
+   The common bindings for each individual regulator can be found in:
+   Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example:
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+
+		regulators {
+			DCDC1 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+			};
+
+			DCDC2 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+			};
+		};
+	};