From: Bartosz Markowski Date: Wed, 14 May 2014 13:56:17 +0000 (+0300) Subject: ath10k: get rid of pci_assign_resource() call from pci_probe X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a6a2f74e565db27d6b23276a4df16e00d789f60c;p=linux-beck.git ath10k: get rid of pci_assign_resource() call from pci_probe On ARM-based (MSM mach), the pci_assign_resource() is passing some invalid pointers and leading to L2 cache errors, what prevents the PCI communication completly. So far I have not found this funtion to be directly called by any other wifi driver and did not found this assigning needed on any other platform. So removing it completely. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 33e87557a7dd..7d72b9cfe0be 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -2647,18 +2647,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev, pci_set_drvdata(pdev, ar); - /* - * Without any knowledge of the Host, the Target may have been reset or - * power cycled and its Config Space may no longer reflect the PCI - * address space that was assigned earlier by the PCI infrastructure. - * Refresh it now. - */ - ret = pci_assign_resource(pdev, BAR_NUM); - if (ret) { - ath10k_err("failed to assign PCI space: %d\n", ret); - goto err_ar; - } - ret = pci_enable_device(pdev); if (ret) { ath10k_err("failed to enable PCI device: %d\n", ret);