From: Qipan Li Date: Wed, 29 Apr 2015 06:45:08 +0000 (+0000) Subject: serial: sirf: use dynamic method allocate uart structure X-Git-Tag: v4.2-rc1~87^2~117 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a6ffe8966acbb66bbff03bb9273dfe88b04585c2;p=karo-tx-linux.git serial: sirf: use dynamic method allocate uart structure In different platform of SiRF SoCs, there is no same uart and usp-uart numbers, it is not convenient to use hard-coded ports array and port lines. here we drop the hard-coded ports table , and drop "cell-index". then move to use alias id to get line. for example: aliases { serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; serial6 = &uart6; serial9 = &usp2; }; at the same, enlarge the max port number according to the chip with the most UART. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 247faed40e37..e033b93f5e1b 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -59,50 +59,7 @@ static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = { {9600, 1114979}, }; -static struct sirfsoc_uart_port sirfsoc_uart_ports[SIRFSOC_UART_NR] = { - [0] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - [1] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, - [2] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 2, - }, - }, - [3] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 3, - }, - }, - [4] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 4, - }, - }, - [5] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 5, - }, - }, -}; +static struct sirfsoc_uart_port *sirf_ports[SIRFSOC_UART_NR]; static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port) { @@ -1187,27 +1144,29 @@ sirfsoc_uart_console_setup(struct console *co, char *options) unsigned int bits = 8; unsigned int parity = 'n'; unsigned int flow = 'n'; - struct uart_port *port = &sirfsoc_uart_ports[co->index].port; - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_uart_port *sirfport; + struct sirfsoc_register *ureg; if (co->index < 0 || co->index >= SIRFSOC_UART_NR) return -EINVAL; - - if (!port->mapbase) + sirfport = sirf_ports[co->index]; + if (!sirfport) + return -ENODEV; + ureg = &sirfport->uart_reg->uart_reg; + if (!sirfport->port.mapbase) return -ENODEV; /* enable usp in mode1 register */ if (sirfport->uart_reg->uart_type == SIRF_USP_UART) - wr_regl(port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN | + wr_regl(&sirfport->port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN | SIRFSOC_USP_ENDIAN_CTRL_LSBF); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - port->cons = co; + sirfport->port.cons = co; /* default console tx/rx transfer using io mode */ sirfport->rx_dma_chan = NULL; sirfport->tx_dma_chan = NULL; - return uart_set_options(port, co, baud, parity, bits, flow); + return uart_set_options(&sirfport->port, co, baud, parity, bits, flow); } static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch) @@ -1224,8 +1183,10 @@ static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch) static void sirfsoc_uart_console_write(struct console *co, const char *s, unsigned int count) { - struct uart_port *port = &sirfsoc_uart_ports[co->index].port; - uart_console_write(port, s, count, sirfsoc_uart_console_putchar); + struct sirfsoc_uart_port *sirfport = sirf_ports[co->index]; + + uart_console_write(&sirfport->port, s, count, + sirfsoc_uart_console_putchar); } static struct console sirfsoc_uart_console = { @@ -1284,16 +1245,15 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) const struct of_device_id *match; match = of_match_node(sirfsoc_uart_ids, pdev->dev.of_node); - if (of_property_read_u32(pdev->dev.of_node, "cell-index", &pdev->id)) { - dev_err(&pdev->dev, - "Unable to find cell-index in uart node.\n"); - ret = -EFAULT; + sirfport = devm_kzalloc(&pdev->dev, sizeof(*sirfport), GFP_KERNEL); + if (!sirfport) { + ret = -ENOMEM; goto err; } - if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) - pdev->id += ((struct sirfsoc_uart_register *) - match->data)->uart_param.register_uart_nr; - sirfport = &sirfsoc_uart_ports[pdev->id]; + sirfport->port.line = of_alias_get_id(pdev->dev.of_node, "serial"); + sirf_ports[sirfport->port.line] = sirfport; + sirfport->port.iotype = UPIO_MEM; + sirfport->port.flags = UPF_BOOT_AUTOCONF; port = &sirfport->port; port->dev = &pdev->dev; port->private_data = sirfport; diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 11fd6814f76d..cd30ba94bec8 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -9,8 +9,6 @@ struct sirfsoc_uart_param { const char *uart_name; const char *port_name; - u32 uart_nr; - u32 register_uart_nr; }; struct sirfsoc_register { @@ -183,8 +181,6 @@ struct sirfsoc_uart_register sirfsoc_usp = { .uart_param = { .uart_name = "ttySiRF", .port_name = "sirfsoc-uart", - .uart_nr = 2, - .register_uart_nr = 3, }, }; @@ -255,8 +251,6 @@ struct sirfsoc_uart_register sirfsoc_uart = { .uart_param = { .uart_name = "ttySiRF", .port_name = "sirfsoc_uart", - .uart_nr = 3, - .register_uart_nr = 0, }, }; /* uart io ctrl */ @@ -365,7 +359,7 @@ struct sirfsoc_uart_register sirfsoc_uart = { #define SIRFSOC_UART_MINOR 0 #define SIRFUART_PORT_NAME "sirfsoc-uart" #define SIRFUART_MAP_SIZE 0x200 -#define SIRFSOC_UART_NR 6 +#define SIRFSOC_UART_NR 11 #define SIRFSOC_PORT_TYPE 0xa5 /* Uart Common Use Macro*/