From: Patrick Boettcher <pboettcher@dibcom.fr>
Date: Wed, 18 Oct 2006 11:34:16 +0000 (-0300)
Subject: V4L/DVB (4772): Add support for DiBcom DiB7000PC
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a75763ffff4175bd8c115c217a39fbf445612aae;p=linux-beck.git

V4L/DVB (4772): Add support for DiBcom DiB7000PC

This patch contains support for the DiB7000PC-driver.

Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index a0aeaf4bbb37..dfd53d5e7926 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -69,6 +69,7 @@ config DVB_USB_DIBUSB_MC
 config DVB_USB_DIB0700
 	tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
 	depends on DVB_USB
+	select DVB_DIB7000P
 	select DVB_DIB7000M
 	select DVB_DIB3000MC
 	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index ac84347f9d4c..cda3adea24fb 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -24,18 +24,23 @@ extern int dvb_usb_dib0700_debug;
 #define REQUEST_I2C_WRITE    0x3
 #define REQUEST_POLL_RC      0x4
 #define REQUEST_JUMPRAM      0x8
+#define REQUEST_SET_CLOCK    0xB
 #define REQUEST_SET_GPIO     0xC
 #define REQUEST_ENABLE_VIDEO 0xF
 	// 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog)
 	// 2 Byte: MPEG2 mode:  4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1)
 	// 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines)    4LSB(     "                "           )
+#define REQUEST_GET_VERSION  0x15
 
 struct dib0700_state {
 	u8 channel_state;
 	u16 mt2060_if1[2];
+
+	u8 is_dib7000pc;
 };
 
 extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
+extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
 extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
 extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
 extern struct i2c_algorithm dib0700_i2c_algo;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index dca6c6985661..6a4d150784a6 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -135,14 +135,46 @@ struct i2c_algorithm dib0700_i2c_algo = {
 int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
 			struct dvb_usb_device_description **desc, int *cold)
 {
-	u8 buf[3] = { REQUEST_SET_GPIO, 4, (GPIO_IN << 7) | (0 << 6) }; // GPIO4 is save - used for I2C
-	*cold = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
-		buf[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, buf, 3, USB_CTRL_GET_TIMEOUT) != 3;
+	u8 b[16];
+	s16 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev,0),
+		REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT);
+
+	deb_info("FW GET_VERSION length: %d\n",ret);
+
+	*cold = ret <= 0;
 
 	deb_info("cold: %d\n", *cold);
 	return 0;
 }
 
+static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll,
+	u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv,
+	u16 pll_loopdiv, u16 free_div, u16 dsuScaler)
+{
+	u8 b[10];
+	b[0] = REQUEST_SET_CLOCK;
+	b[1] = (en_pll << 7) | (pll_src << 6) | (pll_range << 5) | (clock_gpio3 << 4);
+	b[2] = (pll_prediv >> 8)  & 0xff; // MSB
+	b[3] =  pll_prediv        & 0xff; // LSB
+	b[4] = (pll_loopdiv >> 8) & 0xff; // MSB
+	b[5] =  pll_loopdiv       & 0xff; // LSB
+	b[6] = (free_div >> 8)    & 0xff; // MSB
+	b[7] =  free_div          & 0xff; // LSB
+	b[8] = (dsuScaler >> 8)   & 0xff; // MSB
+	b[9] =  dsuScaler         & 0xff; // LSB
+
+	return dib0700_ctrl_wr(d, b, 10);
+}
+
+int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3)
+{
+	switch (clk_MHz) {
+		case 72: dib0700_set_clock(d, 1, 0, 1, clock_out_gp3, 2, 24, 0, 0x4c); break;
+		default: return -EINVAL;
+	}
+	return 0;
+}
+
 static int dib0700_jumpram(struct usb_device *udev, u32 address)
 {
 	int ret, actlen;
@@ -197,7 +229,7 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
 		/* start the firmware */
 		if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) {
 			info("firmware started successfully.");
-			msleep(100);
+			msleep(500);
 		}
 	} else
 		ret = -EIO;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 305dd35a1021..c231a1e5204e 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -10,6 +10,7 @@
 
 #include "dib3000mc.h"
 #include "dib7000m.h"
+#include "dib7000p.h"
 #include "mt2060.h"
 
 static int force_lna_activation;
@@ -96,7 +97,7 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
 }
 
 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
-static struct dibx000_agc_config stk7700p_dib7000m_agc_config = {
+static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
 	BAND_UHF | BAND_VHF,       // band_caps
 
 	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
@@ -141,7 +142,52 @@ static struct dibx000_agc_config stk7700p_dib7000m_agc_config = {
 	},
 };
 
-static struct dibx000_bandwidth_config stk7700p_dib7000m_mt2060_config = {
+static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
+	BAND_UHF | BAND_VHF,
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
+
+	712, // inv_gain
+	41,  // time_stabiliz
+
+	0,   // alpha_level
+	118, // thlock
+
+	0,    // wbd_inv
+	4095, // wbd_ref
+	0,    // wbd_sel
+	0,    // wbd_alpha
+
+	42598, // agc1_max
+	16384, // agc1_min
+	42598, // agc2_max
+	    0, // agc2_min
+
+	  0,   // agc1_pt1
+	137,   // agc1_pt2
+	255,   // agc1_pt3
+
+	  0,   // agc1_slope1
+	255,   // agc1_slope2
+
+	0,     // agc2_pt1
+	0,     // agc2_pt2
+
+	 0,    // agc2_slope1
+	41,    // agc2_slope2
+
+	15, // alpha_mant
+	25, // alpha_exp
+
+	28, // beta_mant
+	48, // beta_exp
+
+	0, // perform_agc_softsplit
+};
+
+static struct dibx000_bandwidth_config stk7700p_pll_config = {
 	60000, 30000, // internal, sampling
 	1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
 	0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
@@ -156,8 +202,19 @@ static struct dib7000m_config stk7700p_dib7000m_config = {
 	.quartz_direct = 1,
 
 	.agc_config_count = 1,
-	.agc = &stk7700p_dib7000m_agc_config,
-	.bw  = &stk7700p_dib7000m_mt2060_config,
+	.agc = &stk7700p_7000m_mt2060_agc_config,
+	.bw  = &stk7700p_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+static struct dib7000p_config stk7700p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc = &stk7700p_7000p_mt2060_agc_config,
+	.bw  = &stk7700p_pll_config,
 
 	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
 	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
@@ -168,13 +225,28 @@ static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	struct dib0700_state *st = adap->dev->priv;
 	/* unless there is no real power management in DVB - we leave the device on GPIO6 */
-	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(10);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(50);
+
 	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9,  GPIO_OUT, 1);
+
 	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
+
+	dib0700_set_gpio(adap->dev,  GPIO0, GPIO_OUT, 1);
 
 	st->mt2060_if1[0] = 1220;
-	return (adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config)) == NULL ? -ENODEV : 0;
+
+	if (dib7000pc_detection(&adap->dev->i2c_adap)) {
+		adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
+		st->is_dib7000pc = 1;
+	} else
+		adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
+
+	return adap->fe == NULL ? -ENODEV : 0;
 }
 
 static struct mt2060_config stk7700p_mt2060_config = {
@@ -184,8 +256,14 @@ static struct mt2060_config stk7700p_mt2060_config = {
 static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	struct dib0700_state *st = adap->dev->priv;
-	struct i2c_adapter *tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
-	return dvb_attach(mt2060_attach,adap->fe, tun_i2c, &stk7700p_mt2060_config,
+	struct i2c_adapter *tun_i2c;
+
+	if (st->is_dib7000pc)
+		tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+	else
+		tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config,
 		st->mt2060_if1[0]) == NULL ? -ENODEV : 0;
 }
 
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 093c7695883d..7279e587e14f 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -180,6 +180,14 @@ config DVB_DIB7000M
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
 
+config DVB_DIB7000P
+	tristate "DiBcom 7000PC"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+	  to support this frontend.
+
 comment "DVB-C (cable) frontends"
 	depends on DVB_CORE
 
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 244e87417b0c..593152ecf7ee 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_DVB_L64781) += l64781.o
 obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o
 obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o
 obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o
+obj-$(CONFIG_DVB_DIB7000P) += dib7000p.o dibx000_common.o
 obj-$(CONFIG_DVB_MT312) += mt312.o
 obj-$(CONFIG_DVB_VES1820) += ves1820.o
 obj-$(CONFIG_DVB_VES1X93) += ves1x93.o
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
new file mode 100644
index 000000000000..0349a4b5da3f
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -0,0 +1,1019 @@
+/*
+ * Linux-DVB Driver for DiBcom's second generation DiB7000P (PC).
+ *
+ * Copyright (C) 2005-6 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
+#include "dib7000p.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P:"); printk(args); } } while (0)
+
+struct dib7000p_state {
+	struct dvb_frontend demod;
+    struct dib7000p_config cfg;
+
+	u8 i2c_addr;
+	struct i2c_adapter   *i2c_adap;
+
+	struct dibx000_i2c_master i2c_master;
+
+	u16 wbd_ref;
+
+	u8 current_band;
+	fe_bandwidth_t current_bandwidth;
+	struct dibx000_agc_config *current_agc;
+	u32 timf;
+
+	u16 gpio_dir;
+	u16 gpio_val;
+};
+
+enum dib7000p_power_mode {
+	DIB7000P_POWER_ALL = 0,
+	DIB7000P_POWER_INTERFACE_ONLY,
+};
+
+static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg)
+{
+	u8 wb[2] = { reg >> 8, reg & 0xff };
+	u8 rb[2];
+	struct i2c_msg msg[2] = {
+		{ .addr = state->i2c_addr >> 1, .flags = 0,        .buf = wb, .len = 2 },
+		{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
+	};
+
+	if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
+		dprintk("i2c read error on %d\n",reg);
+
+	return (rb[0] << 8) | rb[1];
+}
+
+static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val)
+{
+	u8 b[4] = {
+		(reg >> 8) & 0xff, reg & 0xff,
+		(val >> 8) & 0xff, val & 0xff,
+	};
+	struct i2c_msg msg = {
+		.addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
+	};
+	return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+}
+static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode)
+{
+	int    ret = 0;
+	u16 outreg, fifo_threshold, smo_mode;
+
+	outreg = 0;
+	fifo_threshold = 1792;
+	smo_mode = (dib7000p_read_word(state, 235) & 0x0010) | (1 << 1);
+
+	dprintk("-I-  Setting output mode for demod %p to %d\n",
+			&state->demod, mode);
+
+	switch (mode) {
+		case OUTMODE_MPEG2_PAR_GATED_CLK:   // STBs with parallel gated clock
+			outreg = (1 << 10);  /* 0x0400 */
+			break;
+		case OUTMODE_MPEG2_PAR_CONT_CLK:    // STBs with parallel continues clock
+			outreg = (1 << 10) | (1 << 6); /* 0x0440 */
+			break;
+		case OUTMODE_MPEG2_SERIAL:          // STBs with serial input
+			outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0480 */
+			break;
+		case OUTMODE_DIVERSITY:
+			if (state->cfg.hostbus_diversity)
+				outreg = (1 << 10) | (4 << 6); /* 0x0500 */
+			else
+				outreg = (1 << 11);
+			break;
+		case OUTMODE_MPEG2_FIFO:            // e.g. USB feeding
+			smo_mode |= (3 << 1);
+			fifo_threshold = 512;
+			outreg = (1 << 10) | (5 << 6);
+			break;
+		case OUTMODE_HIGH_Z:  // disable
+			outreg = 0;
+			break;
+		default:
+			dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
+			break;
+	}
+
+	if (state->cfg.output_mpeg2_in_188_bytes)
+		smo_mode |= (1 << 5) ;
+
+	ret |= dib7000p_write_word(state,  235, smo_mode);
+	ret |= dib7000p_write_word(state,  236, fifo_threshold); /* synchronous fread */
+	ret |= dib7000p_write_word(state, 1286, outreg);         /* P_Div_active */
+
+	return ret;
+}
+
+static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_power_mode mode)
+{
+	/* by default everything is powered off */
+	u16 reg_774 = 0xffff, reg_775 = 0xffff, reg_776 = 0x0007, reg_899  = 0x0003,
+		reg_1280 = (0xfe00) | (dib7000p_read_word(state, 1280) & 0x01ff);
+
+	/* now, depending on the requested mode, we power on */
+	switch (mode) {
+		/* power up everything in the demod */
+		case DIB7000P_POWER_ALL:
+			reg_774 = 0x0000; reg_775 = 0x0000; reg_776 = 0x0; reg_899 = 0x0; reg_1280 &= 0x01ff;
+			break;
+		/* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */
+		case DIB7000P_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C */
+			reg_1280 &= ~((1 << 14) | (1 << 13) | (1 << 12) | (1 << 10));
+			break;
+/* TODO following stuff is just converted from the dib7000-driver - check when is used what */
+	}
+
+	dib7000p_write_word(state,  774,  reg_774);
+	dib7000p_write_word(state,  775,  reg_775);
+	dib7000p_write_word(state,  776,  reg_776);
+	dib7000p_write_word(state,  899,  reg_899);
+	dib7000p_write_word(state, 1280, reg_1280);
+
+	return 0;
+}
+
+static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_adc_states no)
+{
+	u16 reg_908 = dib7000p_read_word(state, 908),
+	       reg_909 = dib7000p_read_word(state, 909);
+
+	switch (no) {
+		case DIBX000_SLOW_ADC_ON:
+			reg_909 |= (1 << 1) | (1 << 0);
+			dib7000p_write_word(state, 909, reg_909);
+			reg_909 &= ~(1 << 1);
+			break;
+
+		case DIBX000_SLOW_ADC_OFF:
+			reg_909 |=  (1 << 1) | (1 << 0);
+			break;
+
+		case DIBX000_ADC_ON:
+			reg_908 &= 0x0fff;
+			reg_909 &= 0x0003;
+			break;
+
+		case DIBX000_ADC_OFF: // leave the VBG voltage on
+			reg_908 |= (1 << 14) | (1 << 13) | (1 << 12);
+			reg_909 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
+			break;
+
+		case DIBX000_VBG_ENABLE:
+			reg_908 &= ~(1 << 15);
+			break;
+
+		case DIBX000_VBG_DISABLE:
+			reg_908 |= (1 << 15);
+			break;
+
+		default:
+			break;
+	}
+
+//	dprintk("908: %x, 909: %x\n", reg_908, reg_909);
+
+	dib7000p_write_word(state, 908, reg_908);
+	dib7000p_write_word(state, 909, reg_909);
+}
+
+static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx)
+{
+	struct dib7000p_state *state = demod->demodulator_priv;
+	u32 timf;
+
+	// store the current bandwidth for later use
+	state->current_bandwidth = BW_Idx;
+
+	if (state->timf == 0) {
+		dprintk("-D-  Using default timf\n");
+		timf = state->cfg.bw->timf;
+	} else {
+		dprintk("-D-  Using updated timf\n");
+		timf = state->timf;
+	}
+
+	timf = timf * (BW_INDEX_TO_KHZ(BW_Idx) / 100) / 80;
+
+	dprintk("timf: %d\n",timf);
+
+	dib7000p_write_word(state, 23, (timf >> 16) & 0xffff);
+	dib7000p_write_word(state, 24, (timf      ) & 0xffff);
+
+	return 0;
+}
+
+static int dib7000p_sad_calib(struct dib7000p_state *state)
+{
+/* internal */
+//	dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+	dib7000p_write_word(state, 73, (0 << 1) | (0 << 0));
+	dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096
+
+	/* do the calibration */
+	dib7000p_write_word(state, 73, (1 << 0));
+	dib7000p_write_word(state, 73, (0 << 0));
+
+	msleep(1);
+
+	return 0;
+}
+
+static void dib7000p_reset_pll(struct dib7000p_state *state)
+{
+	struct dibx000_bandwidth_config *bw = &state->cfg.bw[0];
+
+	dib7000p_write_word(state, 903, (bw->pll_prediv << 5) | (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset);
+	dib7000p_write_word(state, 900, ((bw->pll_ratio & 0x3f) << 9) | (bw->pll_bypass << 15) | (bw->modulo << 7) | (bw->ADClkSrc << 6) |
+		(bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0));
+
+	dib7000p_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff);
+	dib7000p_write_word(state, 19,  (bw->internal*1000       ) & 0xffff);
+	dib7000p_write_word(state, 21,  (bw->ifreq          >> 16) & 0xffff);
+	dib7000p_write_word(state, 22,  (bw->ifreq               ) & 0xffff);
+
+	dib7000p_write_word(state, 72, bw->sad_cfg);
+}
+
+static int dib7000p_reset_gpio(struct dib7000p_state *st)
+{
+	/* reset the GPIOs */
+	dprintk("-D-  gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",st->gpio_dir, st->gpio_val,st->cfg.gpio_pwm_pos);
+
+	dib7000p_write_word(st, 1029, st->gpio_dir);
+	dib7000p_write_word(st, 1030, st->gpio_val);
+
+	/* TODO 1031 is P_gpio_od */
+
+	dib7000p_write_word(st, 1032, st->cfg.gpio_pwm_pos);
+
+	dib7000p_write_word(st, 1037, st->cfg.pwm_freq_div);
+	return 0;
+}
+
+static int dib7000p_demod_reset(struct dib7000p_state *state)
+{
+	dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
+
+	dib7000p_set_adc_state(state, DIBX000_VBG_ENABLE);
+
+	/* restart all parts */
+	dib7000p_write_word(state,  770, 0xffff);
+	dib7000p_write_word(state,  771, 0xffff);
+	dib7000p_write_word(state,  772, 0x001f);
+	dib7000p_write_word(state,  898, 0x0003);
+	/* except i2c, sdio, gpio - control interfaces */
+	dib7000p_write_word(state, 1280, 0x01fc - ((1 << 7) | (1 << 6) | (1 << 5)) );
+
+	dib7000p_write_word(state,  770, 0);
+	dib7000p_write_word(state,  771, 0);
+	dib7000p_write_word(state,  772, 0);
+	dib7000p_write_word(state,  898, 0);
+	dib7000p_write_word(state, 1280, 0);
+
+	/* default */
+	dib7000p_reset_pll(state);
+
+	if (dib7000p_reset_gpio(state) != 0)
+		dprintk("-E-  GPIO reset was not successful.\n");
+
+	if (dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
+		dprintk("-E-  OUTPUT_MODE could not be resetted.\n");
+
+	/* unforce divstr regardless whether i2c enumeration was done or not */
+	dib7000p_write_word(state, 1285, dib7000p_read_word(state, 1285) & ~(1 << 1) );
+
+	dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
+
+	return 0;
+}
+
+static void dib7000p_restart_agc(struct dib7000p_state *state)
+{
+	// P_restart_iqc & P_restart_agc
+	dib7000p_write_word(state, 770, 0x0c00);
+	dib7000p_write_word(state, 770, 0x0000);
+}
+
+static void dib7000p_update_lna(struct dib7000p_state *state)
+{
+	int i;
+	u16 dyn_gain;
+
+	// when there is no LNA to program return immediatly
+	if (state->cfg.update_lna == NULL)
+		return;
+
+	for (i = 0; i < 5; i++) {
+		// read dyn_gain here (because it is demod-dependent and not tuner)
+		dyn_gain = dib7000p_read_word(state, 394);
+
+		if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
+			dib7000p_restart_agc(state);
+			msleep(5);
+		} else
+			break;
+	}
+}
+
+static void dib7000p_pll_clk_cfg(struct dib7000p_state *state)
+{
+	u16 tmp = 0;
+	tmp = dib7000p_read_word(state, 903);
+	dib7000p_write_word(state, 903, (tmp | 0x1));   //pwr-up pll
+	tmp = dib7000p_read_word(state, 900);
+	dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6));     //use High freq clock
+}
+
+static void dib7000p_update_timf_freq(struct dib7000p_state *state)
+{
+	u32 timf = (dib7000p_read_word(state, 427) << 16) | dib7000p_read_word(state, 428);
+	state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100);
+	dib7000p_write_word(state, 23, (u16) (timf >> 16));
+	dib7000p_write_word(state, 24, (u16) (timf & 0xffff));
+	dprintk("-D-  Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf);
+}
+
+static void dib7000p_set_channel(struct dib7000p_state *state, struct dibx000_ofdm_channel *ch, u8 seq)
+{
+	u16 tmp, est[4]; // reg_26, reg_32, reg_33, reg_187, reg_188, reg_189, reg_190, reg_207, reg_208;
+
+	/* nfft, guard, qam, alpha */
+	dib7000p_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha));
+	dib7000p_write_word(state, 5, (seq << 4) | 1); /* do not force tps, search list 0 */
+
+	/* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */
+	tmp = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1);
+	if (ch->vit_hrch == 0 || ch->vit_select_hp == 1)
+		tmp |= (ch->vit_code_rate_hp << 1);
+	else
+		tmp |= (ch->vit_code_rate_lp << 1);
+	dib7000p_write_word(state, 208, tmp);
+
+	/* P_dvsy_sync_wait */
+	switch (ch->nfft) {
+		case 1: tmp = 256; break;
+		case 2: tmp = 128; break;
+		case 0:
+		default: tmp = 64; break;
+	}
+	tmp *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin
+	tmp <<= 4;
+
+	/* deactive the possibility of diversity reception if extended interleave */
+	/* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
+	if (ch->intlv_native || ch->nfft == 1)
+		tmp |= (1 << 2) | (2 << 0);
+	dib7000p_write_word(state, 207, tmp);
+
+	dib7000p_write_word(state, 26, 0x6680);   // timf(6xxx)
+	dib7000p_write_word(state, 29, 0x1273);   // isi inh1273 on1073
+	dib7000p_write_word(state, 32, 0x0003);   // pha_off_max(xxx3)
+	dib7000p_write_word(state, 33, 0x0005);   // sfreq(xxx5)
+
+	/* channel estimation fine configuration */
+	switch (ch->nqam) {
+		case 2:
+			est[0] = 0x0148;       /* P_adp_regul_cnt 0.04 */
+			est[1] = 0xfff0;       /* P_adp_noise_cnt -0.002 */
+			est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
+			est[3] = 0xfff8;       /* P_adp_noise_ext -0.001 */
+			break;
+		case 1:
+			est[0] = 0x023d;       /* P_adp_regul_cnt 0.07 */
+			est[1] = 0xffdf;       /* P_adp_noise_cnt -0.004 */
+			est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
+			est[3] = 0xfff0;       /* P_adp_noise_ext -0.002 */
+			break;
+		default:
+			est[0] = 0x099a;       /* P_adp_regul_cnt 0.3 */
+			est[1] = 0xffae;       /* P_adp_noise_cnt -0.01 */
+			est[2] = 0x0333;       /* P_adp_regul_ext 0.1 */
+			est[3] = 0xfff8;       /* P_adp_noise_ext -0.002 */
+			break;
+	}
+	for (tmp = 0; tmp < 4; tmp++)
+		dib7000p_write_word(state, 187 + tmp, est[tmp]);
+
+	// set power-up level: interf+analog+AGC
+	dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
+	dib7000p_set_adc_state(state, DIBX000_ADC_ON);
+	dib7000p_pll_clk_cfg(state);
+	msleep(7);
+
+	// AGC initialization
+	if (state->cfg.agc_control)
+		state->cfg.agc_control(&state->demod, 1);
+
+	dib7000p_restart_agc(state);
+
+	// wait AGC rough lock time
+	msleep(5);
+
+	dib7000p_update_lna(state);
+
+	// wait AGC accurate lock time
+	msleep(7);
+	if (state->cfg.agc_control)
+		state->cfg.agc_control(&state->demod, 0);
+}
+
+static int dib7000p_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+	struct dib7000p_state *state = demod->demodulator_priv;
+	struct dibx000_ofdm_channel auto_ch;
+	u32 value;
+
+	INIT_OFDM_CHANNEL(&auto_ch);
+	auto_ch.RF_kHz           = ch->RF_kHz;
+	auto_ch.Bw               = ch->Bw;
+	auto_ch.nqam             = 2;
+	auto_ch.guard            = 0;
+	auto_ch.nfft             = 1;
+	auto_ch.vit_alpha        = 1;
+	auto_ch.vit_select_hp    = 1;
+	auto_ch.vit_code_rate_hp = 2;
+	auto_ch.vit_code_rate_lp = 3;
+	auto_ch.vit_hrch         = 0;
+	auto_ch.intlv_native     = 1;
+
+	dib7000p_set_channel(state, &auto_ch, 7);
+
+	// always use the setting for 8MHz here lock_time for 7,6 MHz are longer
+	value = 30 * state->cfg.bw->internal;
+	dib7000p_write_word(state, 6,  (u16) ((value >> 16) & 0xffff)); // lock0 wait time
+	dib7000p_write_word(state, 7,  (u16)  (value        & 0xffff)); // lock0 wait time
+	value = 100 * state->cfg.bw->internal;
+	dib7000p_write_word(state, 8,  (u16) ((value >> 16) & 0xffff)); // lock1 wait time
+	dib7000p_write_word(state, 9,  (u16)  (value        & 0xffff)); // lock1 wait time
+	value = 500 * state->cfg.bw->internal;
+	dib7000p_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
+	dib7000p_write_word(state, 11, (u16)  (value        & 0xffff)); // lock2 wait time
+
+	value = dib7000p_read_word(state, 0);
+	dib7000p_write_word(state, 0, (1 << 9) | value);
+	dib7000p_read_word(state, 1284);
+	dib7000p_write_word(state, 0, (u16) value);
+
+	return 0;
+}
+
+static int dib7000p_autosearch_is_irq(struct dvb_frontend *demod)
+{
+	struct dib7000p_state *state = demod->demodulator_priv;
+	u16 irq_pending = dib7000p_read_word(state, 1284);
+
+	if (irq_pending & 0x1) // failed
+		return 1;
+
+	if (irq_pending & 0x2) // succeeded
+		return 2;
+
+	return 0; // still pending
+}
+
+static int dib7000p_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+	struct dib7000p_state *state = demod->demodulator_priv;
+	u16 tmp = 0;
+
+	if (ch != NULL)
+		dib7000p_set_channel(state, ch, 0);
+	else
+		return -EINVAL;
+
+	// restart demod
+	dib7000p_write_word(state, 770, 0x4000);
+	dib7000p_write_word(state, 770, 0x0000);
+	msleep(45);
+
+	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
+	dib7000p_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
+
+	// never achieved a lock with that bandwidth so far - wait for osc-freq to update
+	if (state->timf == 0)
+		msleep(200);
+
+	/* offset loop parameters */
+
+	/* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
+	tmp = (6 << 8) | 0x80;
+	switch (ch->nfft) {
+		case 0: tmp |= (7 << 12); break;
+		case 1: tmp |= (9 << 12); break;
+		case 2: tmp |= (8 << 12); break;
+	}
+	dib7000p_write_word(state, 26, tmp);  /* timf_a(6xxx) */
+
+	/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
+	tmp = (0 << 4);
+	switch (ch->nfft) {
+		case 0: tmp |= 0x6; break;
+		case 1: tmp |= 0x8; break;
+		case 2: tmp |= 0x7; break;
+	}
+	dib7000p_write_word(state, 32,  tmp);
+
+	/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
+	tmp = (0 << 4);
+	switch (ch->nfft) {
+		case 0: tmp |= 0x6; break;
+		case 1: tmp |= 0x8; break;
+		case 2: tmp |= 0x7; break;
+	}
+	dib7000p_write_word(state, 33,  tmp);
+
+	tmp = dib7000p_read_word(state,509);
+	if (!((tmp >> 6) & 0x1)) {
+		/* restart the fec */
+		tmp = dib7000p_read_word(state,771);
+		dib7000p_write_word(state, 771, tmp | (1 << 1));
+		dib7000p_write_word(state, 771, tmp);
+		msleep(10);
+		tmp = dib7000p_read_word(state,509);
+	}
+
+	// we achieved a lock - it's time to update the osc freq
+	if ((tmp >> 6) & 0x1)
+		dib7000p_update_timf_freq(state);
+
+	return 0;
+}
+
+static int dib7000p_init(struct dvb_frontend *demod)
+{
+	struct dibx000_agc_config *agc;
+	struct dib7000p_state *state = demod->demodulator_priv;
+	int ret = 0;
+
+	// Demodulator default configuration
+	agc = state->cfg.agc;
+
+	dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
+	dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON);
+
+	/* AGC */
+	ret |= dib7000p_write_word(state, 75 ,  agc->setup );
+	ret |= dib7000p_write_word(state, 76 ,  agc->inv_gain );
+	ret |= dib7000p_write_word(state, 77 ,  agc->time_stabiliz );
+	ret |= dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock);
+
+	// Demod AGC loop configuration
+	ret |= dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp);
+	ret |= dib7000p_write_word(state, 102, (agc->beta_mant << 6)  | agc->beta_exp);
+
+	/* AGC continued */
+	dprintk("-D-  WBD: ref: %d, sel: %d, active: %d, alpha: %d\n",
+		state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
+
+	if (state->wbd_ref != 0)
+		ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref);
+	else
+		ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref);
+
+	ret |= dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) );
+
+	ret |= dib7000p_write_word(state, 107,  agc->agc1_max);
+	ret |= dib7000p_write_word(state, 108,  agc->agc1_min);
+	ret |= dib7000p_write_word(state, 109,  agc->agc2_max);
+	ret |= dib7000p_write_word(state, 110,  agc->agc2_min);
+	ret |= dib7000p_write_word(state, 111, (agc->agc1_pt1 << 8) | agc->agc1_pt2 );
+	ret |= dib7000p_write_word(state, 112,  agc->agc1_pt3);
+	ret |= dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
+	ret |= dib7000p_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
+	ret |= dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
+
+	/* disable power smoothing */
+	ret |= dib7000p_write_word(state, 145, 0);
+	ret |= dib7000p_write_word(state, 146, 0);
+	ret |= dib7000p_write_word(state, 147, 0);
+	ret |= dib7000p_write_word(state, 148, 0);
+	ret |= dib7000p_write_word(state, 149, 0);
+	ret |= dib7000p_write_word(state, 150, 0);
+	ret |= dib7000p_write_word(state, 151, 0);
+	ret |= dib7000p_write_word(state, 152, 0);
+
+	// P_timf_alpha=6, P_corm_alpha=6, P_corm_thres=128 default: 6,4,26
+	ret |= dib7000p_write_word(state, 26 ,0x6680);
+
+	// P_palf_filter_on=1, P_palf_filter_freeze=0, P_palf_alpha_regul=16
+	ret |= dib7000p_write_word(state, 142,0x0410);
+	// P_fft_freq_dir=1, P_fft_nb_to_cut=0
+	ret |= dib7000p_write_word(state, 154,1 << 13);
+	// P_pha3_thres, default 0x3000
+	ret |= dib7000p_write_word(state, 168,0x0ccd);
+	// P_cti_use_cpe=0, P_cti_use_prog=0, P_cti_win_len=16, default: 0x0010
+	//ret |= dib7000p_write_word(state, 169,0x0010);
+	// P_cspu_regul=512, P_cspu_win_cut=15, default: 0x2005
+	ret |= dib7000p_write_word(state, 183,0x200f);
+	// P_adp_regul_cnt=573, default: 410
+	ret |= dib7000p_write_word(state, 187,0x023d);
+	// P_adp_noise_cnt=
+	ret |= dib7000p_write_word(state, 188,0x00a4);
+	// P_adp_regul_ext
+	ret |= dib7000p_write_word(state, 189,0x00a4);
+	// P_adp_noise_ext
+	ret |= dib7000p_write_word(state, 190,0x7ff0);
+	// P_adp_fil
+	ret |= dib7000p_write_word(state, 191,0x3ccc);
+
+	ret |= dib7000p_write_word(state, 222,0x0010);
+	// P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
+	ret |= dib7000p_write_word(state, 235,0x0062);
+
+	// P_iqc_alpha_pha, P_iqc_alpha_amp_dcc_alpha, ...
+	if(state->cfg.tuner_is_baseband)
+		ret |= dib7000p_write_word(state, 36,0x0755);
+	else
+		ret |= dib7000p_write_word(state, 36,0x1f55);
+
+	// auto search configuration
+	ret |= dib7000p_write_word(state, 2  ,0x0004);
+	ret |= dib7000p_write_word(state, 3  ,0x1000);
+
+	/* Equal Lock */
+	ret |= dib7000p_write_word(state, 4   ,0x0814);
+
+	ret |= dib7000p_write_word(state, 6  ,0x001b);
+	ret |= dib7000p_write_word(state, 7  ,0x7740);
+	ret |= dib7000p_write_word(state, 8  ,0x005b);
+	ret |= dib7000p_write_word(state, 9  ,0x8d80);
+	ret |= dib7000p_write_word(state, 10 ,0x01c9);
+	ret |= dib7000p_write_word(state, 11 ,0xc380);
+	ret |= dib7000p_write_word(state, 12 ,0x0000);
+	ret |= dib7000p_write_word(state, 13 ,0x0080);
+	ret |= dib7000p_write_word(state, 14 ,0x0000);
+	ret |= dib7000p_write_word(state, 15 ,0x0090);
+	ret |= dib7000p_write_word(state, 16 ,0x0001);
+	ret |= dib7000p_write_word(state, 17 ,0xd4c0);
+
+	// P_clk_cfg1
+	ret |= dib7000p_write_word(state, 901, 0x0006);
+
+	// P_divclksel=3 P_divbitsel=1
+	ret |= dib7000p_write_word(state, 902, (3 << 10) | (1 << 6));
+
+	// Tuner IO bank: max drive (14mA) + divout pads max drive
+	ret |= dib7000p_write_word(state, 905, 0x2c8e);
+
+	ret |= dib7000p_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
+	dib7000p_sad_calib(state);
+
+	return ret;
+}
+
+static int dib7000p_sleep(struct dvb_frontend *demod)
+{
+	struct dib7000p_state *state = demod->demodulator_priv;
+	return dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) | dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
+}
+
+static int dib7000p_identify(struct dib7000p_state *st)
+{
+	u16 value;
+	dprintk("-I-  DiB7000PC: checking demod on I2C address: %d (%x)\n",
+		st->i2c_addr, st->i2c_addr);
+
+	if ((value = dib7000p_read_word(st, 768)) != 0x01b3) {
+		dprintk("-E-  DiB7000PC: wrong Vendor ID (read=0x%x)\n",value);
+		return -EREMOTEIO;
+	}
+
+	if ((value = dib7000p_read_word(st, 769)) != 0x4000) {
+		dprintk("-E-  DiB7000PC: wrong Device ID (%x)\n",value);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+
+static int dib7000p_get_frontend(struct dvb_frontend* fe,
+				struct dvb_frontend_parameters *fep)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	u16 tps = dib7000p_read_word(state,463);
+
+	fep->inversion = INVERSION_AUTO;
+
+	fep->u.ofdm.bandwidth = state->current_bandwidth;
+
+	switch ((tps >> 8) & 0x3) {
+		case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break;
+		case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break;
+		/* case 2: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_4K; break; */
+	}
+
+	switch (tps & 0x3) {
+		case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break;
+		case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break;
+		case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break;
+		case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break;
+	}
+
+	switch ((tps >> 14) & 0x3) {
+		case 0: fep->u.ofdm.constellation = QPSK; break;
+		case 1: fep->u.ofdm.constellation = QAM_16; break;
+		case 2:
+		default: fep->u.ofdm.constellation = QAM_64; break;
+	}
+
+	/* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
+	/* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */
+
+	fep->u.ofdm.hierarchy_information = HIERARCHY_NONE;
+	switch ((tps >> 5) & 0x7) {
+		case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break;
+		case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break;
+		case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break;
+		case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break;
+		case 7:
+		default: fep->u.ofdm.code_rate_HP = FEC_7_8; break;
+
+	}
+
+	switch ((tps >> 2) & 0x7) {
+		case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break;
+		case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break;
+		case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break;
+		case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break;
+		case 7:
+		default: fep->u.ofdm.code_rate_LP = FEC_7_8; break;
+	}
+
+	/* native interleaver: (dib7000p_read_word(state, 464) >>  5) & 0x1 */
+
+	return 0;
+}
+
+static int dib7000p_set_frontend(struct dvb_frontend* fe,
+				struct dvb_frontend_parameters *fep)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	struct dibx000_ofdm_channel ch;
+
+	INIT_OFDM_CHANNEL(&ch);
+	FEP2DIB(fep,&ch);
+
+	state->current_bandwidth = fep->u.ofdm.bandwidth;
+	dib7000p_set_bandwidth(fe, fep->u.ofdm.bandwidth);
+
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe, fep);
+
+	if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
+		fep->u.ofdm.guard_interval    == GUARD_INTERVAL_AUTO ||
+		fep->u.ofdm.constellation     == QAM_AUTO ||
+		fep->u.ofdm.code_rate_HP      == FEC_AUTO) {
+		int i = 800, found;
+
+		dib7000p_autosearch_start(fe, &ch);
+		do {
+			msleep(1);
+			found = dib7000p_autosearch_is_irq(fe);
+		} while (found == 0 && i--);
+
+		dprintk("autosearch returns: %d\n",found);
+		if (found == 0 || found == 1)
+			return 0; // no channel found
+
+		dib7000p_get_frontend(fe, fep);
+		FEP2DIB(fep, &ch);
+	}
+
+	/* make this a config parameter */
+	dib7000p_set_output_mode(state, OUTMODE_MPEG2_FIFO);
+
+	return dib7000p_tune(fe, &ch);
+}
+
+static int dib7000p_read_status(struct dvb_frontend *fe, fe_status_t *stat)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	u16 lock = dib7000p_read_word(state, 509);
+
+	*stat = 0;
+
+	if (lock & 0x8000)
+		*stat |= FE_HAS_SIGNAL;
+	if (lock & 0x3000)
+		*stat |= FE_HAS_CARRIER;
+	if (lock & 0x0100)
+		*stat |= FE_HAS_VITERBI;
+	if (lock & 0x0010)
+		*stat |= FE_HAS_SYNC;
+	if (lock & 0x0008)
+		*stat |= FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int dib7000p_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	*ber = (dib7000p_read_word(state, 500) << 16) | dib7000p_read_word(state, 501);
+	return 0;
+}
+
+static int dib7000p_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	*unc = dib7000p_read_word(state, 506);
+	return 0;
+}
+
+static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	u16 val = dib7000p_read_word(state, 394);
+	*strength = 65535 - val;
+	return 0;
+}
+
+static int dib7000p_read_snr(struct dvb_frontend* fe, u16 *snr)
+{
+	*snr = 0x0000;
+	return 0;
+}
+
+static int dib7000p_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
+{
+	tune->min_delay_ms = 1000;
+	return 0;
+}
+
+static void dib7000p_release(struct dvb_frontend *demod)
+{
+	struct dib7000p_state *st = demod->demodulator_priv;
+	dibx000_exit_i2c_master(&st->i2c_master);
+	kfree(st);
+}
+
+int dib7000pc_detection(struct i2c_adapter *i2c_adap)
+{
+	u8 tx[2], rx[2];
+	struct i2c_msg msg[2] = {
+		{ .addr = 18 >> 1, .flags = 0,        .buf = tx, .len = 2 },
+		{ .addr = 18 >> 1, .flags = I2C_M_RD, .buf = rx, .len = 2 },
+	};
+
+	tx[0] = 0x03;
+	tx[1] = 0x00;
+
+	if (i2c_transfer(i2c_adap, msg, 2) == 2)
+		if (rx[0] == 0x01 && rx[1] == 0xb3) {
+			dprintk("-D-  DiB7000PC detected\n");
+			return 1;
+		}
+
+	msg[0].addr = msg[1].addr = 0x40;
+
+	if (i2c_transfer(i2c_adap, msg, 2) == 2)
+		if (rx[0] == 0x01 && rx[1] == 0xb3) {
+			dprintk("-D-  DiB7000PC detected\n");
+			return 1;
+		}
+
+	dprintk("-D-  DiB7000PC not detected\n");
+	return 0;
+}
+EXPORT_SYMBOL(dib7000pc_detection);
+
+struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
+{
+	struct dib7000p_state *st = demod->demodulator_priv;
+	return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
+}
+EXPORT_SYMBOL(dib7000p_get_i2c_master);
+
+int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[])
+{
+	struct dib7000p_state st = { .i2c_adap = i2c };
+	int k = 0;
+	u8 new_addr = 0;
+
+	for (k = no_of_demods-1; k >= 0; k--) {
+		st.cfg = cfg[k];
+
+		/* designated i2c address */
+		new_addr          = (0x40 + k) << 1;
+		st.i2c_addr = new_addr;
+		if (dib7000p_identify(&st) != 0) {
+			st.i2c_addr = default_addr;
+			if (dib7000p_identify(&st) != 0) {
+				dprintk("DiB7000P #%d: not identified\n", k);
+				return -EIO;
+			}
+		}
+
+		/* start diversity to pull_down div_str - just for i2c-enumeration */
+		dib7000p_set_output_mode(&st, OUTMODE_DIVERSITY);
+
+		/* set new i2c address and force divstart */
+		dib7000p_write_word(&st, 1285, (new_addr << 2) | 0x2);
+
+		dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr);
+	}
+
+	for (k = 0; k < no_of_demods; k++) {
+		st.cfg = cfg[k];
+		st.i2c_addr = (0x40 + k) << 1;
+
+		// unforce divstr
+		dib7000p_write_word(&st, 1285, st.i2c_addr << 2);
+
+		/* deactivate div - it was just for i2c-enumeration */
+		dib7000p_set_output_mode(&st, OUTMODE_HIGH_Z);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(dib7000p_i2c_enumeration);
+
+static struct dvb_frontend_ops dib7000p_ops;
+struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg)
+{
+	struct dvb_frontend *demod;
+	struct dib7000p_state *st;
+	st = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL);
+	if (st == NULL)
+		return NULL;
+
+	memcpy(&st->cfg, cfg, sizeof(struct dib7000p_config));
+	st->i2c_adap = i2c_adap;
+	st->i2c_addr = i2c_addr;
+	st->gpio_val = cfg->gpio_val;
+	st->gpio_dir = cfg->gpio_dir;
+
+	demod                   = &st->demod;
+	demod->demodulator_priv = st;
+	memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops));
+
+	if (dib7000p_identify(st) != 0)
+		goto error;
+
+	dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr);
+
+	dib7000p_demod_reset(st);
+
+	return demod;
+
+error:
+	kfree(st);
+	return NULL;
+}
+EXPORT_SYMBOL(dib7000p_attach);
+
+static struct dvb_frontend_ops dib7000p_ops = {
+	.info = {
+		.name = "DiBcom 7000PC",
+		.type = FE_OFDM,
+		.frequency_min      = 44250000,
+		.frequency_max      = 867250000,
+		.frequency_stepsize = 62500,
+		.caps = FE_CAN_INVERSION_AUTO |
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_RECOVER |
+			FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.release              = dib7000p_release,
+
+	.init                 = dib7000p_init,
+	.sleep                = dib7000p_sleep,
+
+	.set_frontend         = dib7000p_set_frontend,
+	.get_tune_settings    = dib7000p_fe_get_tune_settings,
+	.get_frontend         = dib7000p_get_frontend,
+
+	.read_status          = dib7000p_read_status,
+	.read_ber             = dib7000p_read_ber,
+	.read_signal_strength = dib7000p_read_signal_strength,
+	.read_snr             = dib7000p_read_snr,
+	.read_ucblocks        = dib7000p_read_unc_blocks,
+};
+
+MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_DESCRIPTION("Driver for the DiBcom 7000PC COFDM demodulator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h
new file mode 100644
index 000000000000..79465cf1aced
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib7000p.h
@@ -0,0 +1,46 @@
+#ifndef DIB7000P_H
+#define DIB7000P_H
+
+#include "dibx000_common.h"
+
+struct dib7000p_config {
+	u8 output_mpeg2_in_188_bytes;
+	u8 hostbus_diversity;
+	u8 tuner_is_baseband;
+	int (*update_lna) (struct dvb_frontend *, u16 agc_global);
+
+	struct dibx000_agc_config *agc;
+	struct dibx000_bandwidth_config *bw;
+
+#define DIB7000P_GPIO_DEFAULT_DIRECTIONS 0xffff
+	u16 gpio_dir;
+#define DIB7000P_GPIO_DEFAULT_VALUES     0x0000
+	u16 gpio_val;
+#define DIB7000P_GPIO_PWM_POS0(v)        ((v & 0xf) << 12)
+#define DIB7000P_GPIO_PWM_POS1(v)        ((v & 0xf) << 8 )
+#define DIB7000P_GPIO_PWM_POS2(v)        ((v & 0xf) << 4 )
+#define DIB7000P_GPIO_PWM_POS3(v)         (v & 0xf)
+#define DIB7000P_GPIO_DEFAULT_PWM_POS    0xffff
+	u16 gpio_pwm_pos;
+
+	u16 pwm_freq_div;
+
+	u8 quartz_direct;
+
+	int (*agc_control) (struct dvb_frontend *, u8 before);
+};
+
+#define DEFAULT_DIB7000P_I2C_ADDRESS 18
+
+extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg);
+extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
+extern int dib7000pc_detection(struct i2c_adapter *i2c_adap);
+
+/* TODO
+extern INT dib7000p_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val);
+extern INT dib7000p_enable_vbg_voltage(struct dibDemod *demod);
+extern void dib7000p_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff);
+extern USHORT dib7000p_get_current_agc_global(struct dibDemod *demod);
+*/
+
+#endif