From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 21 Feb 2012 16:31:06 +0000 (+0200)
Subject: iwlwifi: move uCode flags handling to op_mode
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a78be210d53b24cc3437d4362912c510b895a8eb;p=linux-beck.git

iwlwifi: move uCode flags handling to op_mode

The uCode flags modification is op_mode dependent
since the P2P config is an op-mode config.

This also fixes P2P enabling: due to the uCode
loading code shuffle moving the SKU check before
the EEPROM was read it was always false and would
always disable PAN/P2P.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 5e476a80bd8c..d70dd6fff4f5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1151,6 +1151,7 @@ int iwl_op_mode_dvm_start(struct iwl_bus *bus,
 	struct iwl_priv *priv;
 	struct ieee80211_hw *hw;
 	u16 num_mac;
+	u32 ucode_flags;
 
 	/************************
 	 * 1. Allocating HW data
@@ -1242,6 +1243,22 @@ int iwl_op_mode_dvm_start(struct iwl_bus *bus,
 	 ************************/
 	iwl_set_hw_params(priv);
 
+	ucode_flags = fw->ucode_capa.flags;
+
+#ifndef CONFIG_IWLWIFI_P2P
+	ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
+#endif
+	if (!(hw_params(priv).sku & EEPROM_SKU_CAP_IPAN_ENABLE))
+		ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
+
+	/*
+	 * if not PAN, then don't support P2P -- might be a uCode
+	 * packaging bug or due to the eeprom check above
+	 */
+	if (!(ucode_flags & IWL_UCODE_TLV_FLAGS_PAN))
+		ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
+
+
 	/*******************
 	 * 6. Setup priv
 	 *******************/
@@ -1266,9 +1283,9 @@ int iwl_op_mode_dvm_start(struct iwl_bus *bus,
 		 "%s", fw->fw_version);
 
 	priv->new_scan_threshold_behaviour =
-		!!(fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
+		!!(ucode_flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
 
-	if (fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN) {
+	if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) {
 		priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
 		priv->shrd->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
 	} else {
@@ -1282,7 +1299,7 @@ int iwl_op_mode_dvm_start(struct iwl_bus *bus,
 		fw->ucode_capa.standard_phy_calibration_size + 1;
 
 	/* initialize all valid contexts */
-	iwl_init_context(priv, fw->ucode_capa.flags);
+	iwl_init_context(priv, ucode_flags);
 
 	/**************************************************
 	 * This is still part of probe() in a sense...
diff --git a/drivers/net/wireless/iwlwifi/iwl-ucode.c b/drivers/net/wireless/iwlwifi/iwl-ucode.c
index 99f89b27f42c..3645bf3d61c6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-ucode.c
@@ -1226,9 +1226,7 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
 		nic->inst_evtlog_size =
 			cfg->base_params->max_event_log_size;
 	nic->inst_errlog_ptr = pieces.inst_errlog_ptr;
-#ifndef CONFIG_IWLWIFI_P2P
-	fw->ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
-#endif
+
 	/*
 	 * figure out the offset of chain noise reset and gain commands
 	 * base on the size of standard phy calibration commands table size
@@ -1238,16 +1236,6 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
 		fw->ucode_capa.standard_phy_calibration_size =
 			IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE;
 
-	if (!(cfg->sku & EEPROM_SKU_CAP_IPAN_ENABLE))
-		fw->ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
-
-	/*
-	 * if not PAN, then don't support P2P -- might be a uCode
-	 * packaging bug or due to the eeprom check above
-	 */
-	if (!(fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN))
-		fw->ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
-
 	/* We have our copies now, allow OS release its copies */
 	release_firmware(ucode_raw);
 	complete(&nic->request_firmware_complete);