From: Imre Deak Date: Fri, 1 Apr 2016 13:02:38 +0000 (+0300) Subject: drm/i915/bxt: Suspend power domains during suspend-to-idle X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a7c8125f464ce798fe0962e0fd837802e7bf28cc;p=linux-beck.git drm/i915/bxt: Suspend power domains during suspend-to-idle On SKL/KBL suspend-to-idle (aka freeze/s0ix) is performed with DMC firmware assistance where the target display power state is DC6. On Broxton on the other hand we don't use the firmware for this, but rely instead on a manual DC9 flow. For this we have to uninitialize the display following the BSpec display uninit sequence, just as during S3/S4, so make sure we follow this sequence. CC: Patrik Jakobsson Signed-off-by: Imre Deak Reviewed-by: Patrik Jakobsson Link: http://patchwork.freedesktop.org/patch/msgid/1459515767-29228-8-git-send-email-imre.deak@intel.com --- diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index adc33927e838..ef0e0dbf2e35 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -657,7 +657,8 @@ static int i915_drm_suspend_late(struct drm_device *drm_dev, bool hibernation) disable_rpm_wakeref_asserts(dev_priv); - fw_csr = suspend_to_idle(dev_priv) && dev_priv->csr.dmc_payload; + fw_csr = !IS_BROXTON(dev_priv) && + suspend_to_idle(dev_priv) && dev_priv->csr.dmc_payload; /* * In case of firmware assisted context save/restore don't manually * deinit the power domains. This also means the CSR/DMC firmware will @@ -837,7 +838,8 @@ static int i915_drm_resume_early(struct drm_device *dev) intel_uncore_sanitize(dev); - if (!(dev_priv->suspended_to_idle && dev_priv->csr.dmc_payload)) + if (IS_BROXTON(dev_priv) || + !(dev_priv->suspended_to_idle && dev_priv->csr.dmc_payload)) intel_power_domains_init_hw(dev_priv, true); out: