From: Paul Burton Date: Mon, 2 Dec 2013 16:48:36 +0000 (+0000) Subject: MIPS: Malta: initialise the RTC at boot X-Git-Tag: v3.14-rc1~37^2~71 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a87ea88d8f6c;p=karo-tx-linux.git MIPS: Malta: initialise the RTC at boot The RTC is used on Malta to estimate the clock frequency of the CPU & optionally the GIC. However the kernel previously did not initialise the RTC, instead relying upon the bootloader having done so. In order to minimise dependencies which the kernel has upon the bootloader this patch causes the kernel to initialise the RTC itself prior to making use of it. Signed-off-by: Paul Burton Reviewed-by: Markos Chandras Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6184/ --- diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c index 136c5dcab4f0..319009912142 100644 --- a/arch/mips/mti-malta/malta-time.c +++ b/arch/mips/mti-malta/malta-time.c @@ -166,11 +166,24 @@ unsigned int get_c0_compare_int(void) return mips_cpu_timer_irq; } +static void __init init_rtc(void) +{ + /* stop the clock whilst setting it up */ + CMOS_WRITE(RTC_SET | RTC_24H, RTC_CONTROL); + + /* 32KHz time base */ + CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_FREQ_SELECT); + + /* start the clock */ + CMOS_WRITE(RTC_24H, RTC_CONTROL); +} + void __init plat_time_init(void) { unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK); unsigned int freq; + init_rtc(); estimate_frequencies(); freq = mips_hpt_frequency;