From: H Hartley Sweeten Date: Mon, 9 Dec 2013 22:31:23 +0000 (-0700) Subject: staging: comedi: pcmmio: tidy up the multi-line comments X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a88a6376de3e2faebbeb1afdb8ab9bad49676ce4;p=linux-beck.git staging: comedi: pcmmio: tidy up the multi-line comments Tidy up the multi-line comments are the beginning of the file to follow the CodingStyle. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c index 3bdbebe5d21d..8f79cdc00672 100644 --- a/drivers/staging/comedi/drivers/pcmmio.c +++ b/drivers/staging/comedi/drivers/pcmmio.c @@ -1,76 +1,76 @@ /* - comedi/drivers/pcmmio.c - Driver for Winsystems PC-104 based multifunction IO board. - - COMEDI - Linux Control and Measurement Device Interface - Copyright (C) 2007 Calin A. Culianu - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. -*/ + * pcmmio.c + * Driver for Winsystems PC-104 based multifunction IO board. + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 2007 Calin A. Culianu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + /* -Driver: pcmmio -Description: A driver for the PCM-MIO multifunction board -Devices: [Winsystems] PCM-MIO (pcmmio) -Author: Calin Culianu -Updated: Wed, May 16 2007 16:21:10 -0500 -Status: works - -A driver for the relatively new PCM-MIO multifunction board from -Winsystems. This board is a PC-104 based I/O board. It contains -four subdevices: - subdevice 0 - 16 channels of 16-bit AI - subdevice 1 - 8 channels of 16-bit AO - subdevice 2 - first 24 channels of the 48 channel of DIO - (with edge-triggered interrupt support) - subdevice 3 - last 24 channels of the 48 channel DIO - (no interrupt support for this bank of channels) - - Some notes: - - Synchronous reads and writes are the only things implemented for AI and AO, - even though the hardware itself can do streaming acquisition, etc. Anyone - want to add asynchronous I/O for AI/AO as a feature? Be my guest... - - Asynchronous I/O for the DIO subdevices *is* implemented, however! They are - basically edge-triggered interrupts for any configuration of the first - 24 DIO-lines. - - Also note that this interrupt support is untested. - - A few words about edge-detection IRQ support (commands on DIO): - - * To use edge-detection IRQ support for the DIO subdevice, pass the IRQ - of the board to the comedi_config command. The board IRQ is not jumpered - but rather configured through software, so any IRQ from 1-15 is OK. - - * Due to the genericity of the comedi API, you need to create a special - comedi_command in order to use edge-triggered interrupts for DIO. - - * Use comedi_commands with TRIG_NOW. Your callback will be called each - time an edge is detected on the specified DIO line(s), and the data - values will be two sample_t's, which should be concatenated to form - one 32-bit unsigned int. This value is the mask of channels that had - edges detected from your channel list. Note that the bits positions - in the mask correspond to positions in your chanlist when you - specified the command and *not* channel id's! - - * To set the polarity of the edge-detection interrupts pass a nonzero value - for either CR_RANGE or CR_AREF for edge-up polarity, or a zero - value for both CR_RANGE and CR_AREF if you want edge-down polarity. - -Configuration Options: - [0] - I/O port base address - [1] - IRQ (optional -- for edge-detect interrupt support only, - leave out if you don't need this feature) -*/ + * Driver: pcmmio + * Description: A driver for the PCM-MIO multifunction board + * Devices: (Winsystems) PCM-MIO [pcmmio] + * Author: Calin Culianu + * Updated: Wed, May 16 2007 16:21:10 -0500 + * Status: works + * + * A driver for the PCM-MIO multifunction board from Winsystems. This + * is a PC-104 based I/O board. It contains four subdevices: + * + * subdevice 0 - 16 channels of 16-bit AI + * subdevice 1 - 8 channels of 16-bit AO + * subdevice 2 - first 24 channels of the 48 channel of DIO + * (with edge-triggered interrupt support) + * subdevice 3 - last 24 channels of the 48 channel DIO + * (no interrupt support for this bank of channels) + * + * Some notes: + * + * Synchronous reads and writes are the only things implemented for analog + * input and output. The hardware itself can do streaming acquisition, etc. + * + * Asynchronous I/O for the DIO subdevices *is* implemented, however! They + * are basically edge-triggered interrupts for any configuration of the + * channels in subdevice 2. + * + * Also note that this interrupt support is untested. + * + * A few words about edge-detection IRQ support (commands on DIO): + * + * To use edge-detection IRQ support for the DIO subdevice, pass the IRQ + * of the board to the comedi_config command. The board IRQ is not jumpered + * but rather configured through software, so any IRQ from 1-15 is OK. + * + * Due to the genericity of the comedi API, you need to create a special + * comedi_command in order to use edge-triggered interrupts for DIO. + * + * Use comedi_commands with TRIG_NOW. Your callback will be called each + * time an edge is detected on the specified DIO line(s), and the data + * values will be two sample_t's, which should be concatenated to form + * one 32-bit unsigned int. This value is the mask of channels that had + * edges detected from your channel list. Note that the bits positions + * in the mask correspond to positions in your chanlist when you + * specified the command and *not* channel id's! + * + * To set the polarity of the edge-detection interrupts pass a nonzero value + * for either CR_RANGE or CR_AREF for edge-up polarity, or a zero + * value for both CR_RANGE and CR_AREF if you want edge-down polarity. + * + * Configuration Options: + * [0] - I/O port base address + * [1] - IRQ (optional -- for edge-detect interrupt support only, + * leave out if you don't need this feature) + */ #include #include