From: Shawn Guo Date: Thu, 18 Jul 2013 06:42:28 +0000 (+0800) Subject: ARM: imx6q: remove board specific CLKO setup X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a94f8ec;p=linux-beck.git ARM: imx6q: remove board specific CLKO setup The CLKO is widely used by imx6q board designs to clock audio codec. Since most codecs accept 24 MHz frequency, let's initially set up CLKO with OSC24M (cko <-- cko2 <-- osc). Then those board specific CLKO setup for audio codec can be removed. The board dts files also need an update on cko reference in codec node. Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index e0f4cd041c70..3530280f5150 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -167,7 +167,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 169>; + clocks = <&clks 201>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 166b9aead12d..75b36b2aed61 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -109,7 +109,7 @@ codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; - clocks = <&clks 169>; + clocks = <&clks 201>; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 7a46f64eccb5..77188cbf047a 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -60,7 +60,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 169>; + clocks = <&clks 201>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index bbafa3ccacb5..9181a241d3a8 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -288,6 +288,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) struct device_node *np; void __iomem *base; int i, irq; + int ret; clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckil] = imx_obtain_fixed_clock("ckil", 0); @@ -592,6 +593,16 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_prepare_enable(clk[usbphy2_gate]); } + /* + * Let's initially set up CLKO with OSC24M, since this configuration + * is widely used by imx6q board designs to clock audio codec. + */ + ret = clk_set_parent(clk[cko2_sel], clk[osc]); + if (!ret) + ret = clk_set_parent(clk[cko], clk[cko2]); + if (ret) + pr_warn("failed to set up CLKO: %d\n", ret); + /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 1e093abe7b95..b60509831d67 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -162,30 +162,6 @@ static int ar8031_phy_fixup(struct phy_device *dev) return 0; } -static void __init imx6q_sabrelite_cko1_setup(void) -{ - struct clk *cko1_sel, *ahb, *cko1; - unsigned long rate; - - cko1_sel = clk_get_sys(NULL, "cko1_sel"); - ahb = clk_get_sys(NULL, "ahb"); - cko1 = clk_get_sys(NULL, "cko1"); - if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) { - pr_err("cko1 setup failed!\n"); - goto put_clk; - } - clk_set_parent(cko1_sel, ahb); - rate = clk_round_rate(cko1, 16000000); - clk_set_rate(cko1, rate); -put_clk: - if (!IS_ERR(cko1_sel)) - clk_put(cko1_sel); - if (!IS_ERR(ahb)) - clk_put(ahb); - if (!IS_ERR(cko1)) - clk_put(cko1); -} - #define PHY_ID_AR8031 0x004dd074 static void __init imx6q_enet_phy_init(void) @@ -200,45 +176,6 @@ static void __init imx6q_enet_phy_init(void) } } -static void __init imx6q_sabresd_cko1_setup(void) -{ - struct clk *cko1_sel, *pll4, *pll4_post, *cko1; - unsigned long rate; - - cko1_sel = clk_get_sys(NULL, "cko1_sel"); - pll4 = clk_get_sys(NULL, "pll4_audio"); - pll4_post = clk_get_sys(NULL, "pll4_post_div"); - cko1 = clk_get_sys(NULL, "cko1"); - if (IS_ERR(cko1_sel) || IS_ERR(pll4) - || IS_ERR(pll4_post) || IS_ERR(cko1)) { - pr_err("cko1 setup failed!\n"); - goto put_clk; - } - /* - * Setting pll4 at 768MHz (24MHz * 32) - * So its child clock can get 24MHz easily - */ - clk_set_rate(pll4, 768000000); - - clk_set_parent(cko1_sel, pll4_post); - rate = clk_round_rate(cko1, 24000000); - clk_set_rate(cko1, rate); -put_clk: - if (!IS_ERR(cko1_sel)) - clk_put(cko1_sel); - if (!IS_ERR(pll4_post)) - clk_put(pll4_post); - if (!IS_ERR(pll4)) - clk_put(pll4); - if (!IS_ERR(cko1)) - clk_put(cko1); -} - -static void __init imx6q_sabresd_init(void) -{ - imx6q_sabresd_cko1_setup(); -} - static void __init imx6q_1588_init(void) { struct regmap *gpr; @@ -255,12 +192,6 @@ static void __init imx6q_1588_init(void) static void __init imx6q_init_machine(void) { - if (of_machine_is_compatible("fsl,imx6q-sabrelite")) - imx6q_sabrelite_cko1_setup(); - else if (of_machine_is_compatible("fsl,imx6q-sabresd") || - of_machine_is_compatible("fsl,imx6dl-sabresd")) - imx6q_sabresd_init(); - imx6q_enet_phy_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);