From: Matt Porter Date: Wed, 12 Mar 2014 13:14:39 +0000 (-0400) Subject: ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a97d67d1c4c331644f26704976f92a5b160c3f77;p=linux-beck.git ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot The BCM28155-AP board has a bootloader that expects the camldo1 regulator to be enabled on entry. Currently, the camldo1 regulator is disabled when no longer in use as is the case during a reboot / warm reset. This causes the early bootloader to hang upon entry. Add regulator-always-on to the camldo1 constraint to fix reboot. Reported-by: Alex Elder Signed-off-by: Matt Porter Tested-by: Alex Elder --- diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index 4461ffb7bcad..af3da55eef49 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -89,6 +89,7 @@ camldo1_reg: camldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; sdldo_reg: sdldo {