From: Bryan Freed Date: Wed, 12 Jan 2011 21:43:19 +0000 (-0800) Subject: drm/i915: Honour LVDS sync polarity from EDID X-Git-Tag: v2.6.39-rc1~458^2~9^2~55 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=aa9b500ddf1a6318e7cf8b1754696edddae86db9;p=karo-tx-linux.git drm/i915: Honour LVDS sync polarity from EDID The i915 driver normally assumes the video bios has configured several of the LVDS panel registers, and it just inherits the values. If the vbios has not run, several of these will need to be setup. So we need to check that the LVDS sync polarity is correctly configured per any available modelines (e.g. EDID) and adjust if not, issuing a warning as we do. Signed-off-by: Mark Hayter Signed-off-by: Chris Wilson --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 810cfa866413..4c71f5692dae 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1437,6 +1437,10 @@ #define LVDS_PIPEB_SELECT (1 << 30) /* LVDS dithering flag on 965/g4x platform */ #define LVDS_ENABLE_DITHER (1 << 25) +/* LVDS sync polarity flags. Set to invert (i.e. negative) */ +#define LVDS_VSYNC_POLARITY (1 << 21) +#define LVDS_HSYNC_POLARITY (1 << 20) + /* Enable border for unscaled (or aspect-scaled) display */ #define LVDS_BORDER_ENABLE (1 << 15) /* diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a90d65dad811..2c7e90f12657 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4304,6 +4304,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, int ret; struct fdi_m_n m_n = {0}; u32 reg, temp; + u32 lvds_sync = 0; int target_clock; drm_vblank_pre_modeset(dev, pipe); @@ -4755,6 +4756,22 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, else temp &= ~LVDS_ENABLE_DITHER; } + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) + lvds_sync |= LVDS_HSYNC_POLARITY; + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) + lvds_sync |= LVDS_VSYNC_POLARITY; + if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) + != lvds_sync) { + char flags[2] = "-+"; + DRM_INFO("Changing LVDS panel from " + "(%chsync, %cvsync) to (%chsync, %cvsync)\n", + flags[!(temp & LVDS_HSYNC_POLARITY)], + flags[!(temp & LVDS_VSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); + temp |= lvds_sync; + } I915_WRITE(reg, temp); }