From: Hans de Goede Date: Sun, 4 Jun 2017 11:31:28 +0000 (+0200) Subject: mfd: axp20x-i2c: Document that this must be builtin on x86 X-Git-Tag: v4.13-rc1~115^2~5 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=aaac4a2eadaa6474a347ee4b07d4ea8bb6908c8e;p=karo-tx-linux.git mfd: axp20x-i2c: Document that this must be builtin on x86 On x86 the AXP288 PMIC provides an ACPI OpRegion handler, which must be available before other drivers using it are loaded, which can only be ensured if the MFD, OpRegion and i2c-bus drivers are built-in. Since the AXP20x MFD code is used on non x86 too we cannot simply change this into a bool, I've tried some Kconfig magic with if x86 but I could not get this working correctly, so this commit just documents that this should be built-in on x86, which fixes errors like these during boot: mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA ACPI Error: No handler for Region [REGS] (ffff93543b0cc3a8) [UserDefinedRegion] ACPI Error: Region UserDefinedRegion (ID=143) has no handler (20170119/exfldio-2 ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C7.PMI5.GET] (Node ffff93 ACPI Error: Method parse/execution failed [\_SB.PCI0.SHC1._PS0] (Node ffff93543b acpi 80860F14:02: Failed to change power state to D0 Signed-off-by: Hans de Goede Acked-by: Chen-Yu Tsai Tested-by: russianneuromancer Signed-off-by: Lee Jones --- diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 44e7164b5063..1428814c33f9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -160,6 +160,11 @@ config MFD_AXP20X_I2C components like regulators or the PEK (Power Enable Key) under the corresponding menus. + Note on x86 this provides an ACPI OpRegion, so this must be 'y' + (builtin) and not a module, as the OpRegion must be available as + soon as possible. For the same reason the I2C bus driver options + I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_BAYTRAIL must be 'y' too. + config MFD_AXP20X_RSB tristate "X-Powers AXP series PMICs with RSB" select MFD_AXP20X