From: Mauro Carvalho Chehab Date: Sun, 19 Jan 2014 13:31:47 +0000 (-0300) Subject: [media] drx-j: reset the DVB scan configuration at powerup X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=aafdbaa6cfb4dd02a1eb1ebcbb63a3aba3f8eaa4;p=linux-beck.git [media] drx-j: reset the DVB scan configuration at powerup Without this fixup, the DRX-J will not be properly initialized, loosing several PIDs. Acked-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.c b/drivers/media/dvb-frontends/drx39xyj/drxj.c index b90e6c1210f8..b1ad26b9778a 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drxj.c +++ b/drivers/media/dvb-frontends/drx39xyj/drxj.c @@ -18354,6 +18354,81 @@ rw_error: /*============================================================================*/ +static void drxj_reset_mode(struct drxj_data *ext_attr) +{ + /* Initialize default AFE configuartion for QAM */ + if (ext_attr->has_lna) { + /* IF AGC off, PGA active */ +#ifndef DRXJ_VSB_ONLY + ext_attr->qam_if_agc_cfg.standard = DRX_STANDARD_ITU_B; + ext_attr->qam_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_OFF; + ext_attr->qam_pga_cfg = 140 + (11 * 13); +#endif + ext_attr->vsb_if_agc_cfg.standard = DRX_STANDARD_8VSB; + ext_attr->vsb_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_OFF; + ext_attr->vsb_pga_cfg = 140 + (11 * 13); + } else { + /* IF AGC on, PGA not active */ +#ifndef DRXJ_VSB_ONLY + ext_attr->qam_if_agc_cfg.standard = DRX_STANDARD_ITU_B; + ext_attr->qam_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; + ext_attr->qam_if_agc_cfg.min_output_level = 0; + ext_attr->qam_if_agc_cfg.max_output_level = 0x7FFF; + ext_attr->qam_if_agc_cfg.speed = 3; + ext_attr->qam_if_agc_cfg.top = 1297; + ext_attr->qam_pga_cfg = 140; +#endif + ext_attr->vsb_if_agc_cfg.standard = DRX_STANDARD_8VSB; + ext_attr->vsb_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; + ext_attr->vsb_if_agc_cfg.min_output_level = 0; + ext_attr->vsb_if_agc_cfg.max_output_level = 0x7FFF; + ext_attr->vsb_if_agc_cfg.speed = 3; + ext_attr->vsb_if_agc_cfg.top = 1024; + ext_attr->vsb_pga_cfg = 140; + } + /* TODO: remove min_output_level and max_output_level for both QAM and VSB after */ + /* mc has not used them */ +#ifndef DRXJ_VSB_ONLY + ext_attr->qam_rf_agc_cfg.standard = DRX_STANDARD_ITU_B; + ext_attr->qam_rf_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; + ext_attr->qam_rf_agc_cfg.min_output_level = 0; + ext_attr->qam_rf_agc_cfg.max_output_level = 0x7FFF; + ext_attr->qam_rf_agc_cfg.speed = 3; + ext_attr->qam_rf_agc_cfg.top = 9500; + ext_attr->qam_rf_agc_cfg.cut_off_current = 4000; + ext_attr->qam_pre_saw_cfg.standard = DRX_STANDARD_ITU_B; + ext_attr->qam_pre_saw_cfg.reference = 0x07; + ext_attr->qam_pre_saw_cfg.use_pre_saw = true; +#endif + /* Initialize default AFE configuartion for VSB */ + ext_attr->vsb_rf_agc_cfg.standard = DRX_STANDARD_8VSB; + ext_attr->vsb_rf_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; + ext_attr->vsb_rf_agc_cfg.min_output_level = 0; + ext_attr->vsb_rf_agc_cfg.max_output_level = 0x7FFF; + ext_attr->vsb_rf_agc_cfg.speed = 3; + ext_attr->vsb_rf_agc_cfg.top = 9500; + ext_attr->vsb_rf_agc_cfg.cut_off_current = 4000; + ext_attr->vsb_pre_saw_cfg.standard = DRX_STANDARD_8VSB; + ext_attr->vsb_pre_saw_cfg.reference = 0x07; + ext_attr->vsb_pre_saw_cfg.use_pre_saw = true; + +#ifndef DRXJ_DIGITAL_ONLY + /* Initialize default AFE configuartion for ATV */ + ext_attr->atv_rf_agc_cfg.standard = DRX_STANDARD_NTSC; + ext_attr->atv_rf_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; + ext_attr->atv_rf_agc_cfg.top = 9500; + ext_attr->atv_rf_agc_cfg.cut_off_current = 4000; + ext_attr->atv_rf_agc_cfg.speed = 3; + ext_attr->atv_if_agc_cfg.standard = DRX_STANDARD_NTSC; + ext_attr->atv_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; + ext_attr->atv_if_agc_cfg.speed = 3; + ext_attr->atv_if_agc_cfg.top = 2400; + ext_attr->atv_pre_saw_cfg.reference = 0x0007; + ext_attr->atv_pre_saw_cfg.use_pre_saw = true; + ext_attr->atv_pre_saw_cfg.standard = DRX_STANDARD_NTSC; +#endif +} + /** * \fn int ctrl_power_mode() * \brief Set the power mode of the device to the specified power mode @@ -18418,6 +18493,9 @@ ctrl_power_mode(struct drx_demod_instance *demod, enum drx_power_mode *mode) if ((*mode == DRX_POWER_UP)) { /* Restore analog & pin configuartion */ + + /* Initialize default AFE configuartion for VSB */ + drxj_reset_mode(ext_attr); } else { /* Power down to requested mode */ /* Backup some register settings */ @@ -20034,6 +20112,7 @@ rw_error: /*============================================================================= ===== EXPORTED FUNCTIONS ====================================================*/ + /** * \fn drxj_open() * \brief Open the demod instance, configure device, configure drxdriver @@ -20221,77 +20300,7 @@ int drxj_open(struct drx_demod_instance *demod) common_attr->scan_demod_lock_timeout = DRXJ_SCAN_TIMEOUT; common_attr->scan_desired_lock = DRX_LOCKED; - /* Initialize default AFE configuartion for QAM */ - if (ext_attr->has_lna) { - /* IF AGC off, PGA active */ -#ifndef DRXJ_VSB_ONLY - ext_attr->qam_if_agc_cfg.standard = DRX_STANDARD_ITU_B; - ext_attr->qam_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_OFF; - ext_attr->qam_pga_cfg = 140 + (11 * 13); -#endif - ext_attr->vsb_if_agc_cfg.standard = DRX_STANDARD_8VSB; - ext_attr->vsb_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_OFF; - ext_attr->vsb_pga_cfg = 140 + (11 * 13); - } else { - /* IF AGC on, PGA not active */ -#ifndef DRXJ_VSB_ONLY - ext_attr->qam_if_agc_cfg.standard = DRX_STANDARD_ITU_B; - ext_attr->qam_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; - ext_attr->qam_if_agc_cfg.min_output_level = 0; - ext_attr->qam_if_agc_cfg.max_output_level = 0x7FFF; - ext_attr->qam_if_agc_cfg.speed = 3; - ext_attr->qam_if_agc_cfg.top = 1297; - ext_attr->qam_pga_cfg = 140; -#endif - ext_attr->vsb_if_agc_cfg.standard = DRX_STANDARD_8VSB; - ext_attr->vsb_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; - ext_attr->vsb_if_agc_cfg.min_output_level = 0; - ext_attr->vsb_if_agc_cfg.max_output_level = 0x7FFF; - ext_attr->vsb_if_agc_cfg.speed = 3; - ext_attr->vsb_if_agc_cfg.top = 1024; - ext_attr->vsb_pga_cfg = 140; - } - /* TODO: remove min_output_level and max_output_level for both QAM and VSB after */ - /* mc has not used them */ -#ifndef DRXJ_VSB_ONLY - ext_attr->qam_rf_agc_cfg.standard = DRX_STANDARD_ITU_B; - ext_attr->qam_rf_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; - ext_attr->qam_rf_agc_cfg.min_output_level = 0; - ext_attr->qam_rf_agc_cfg.max_output_level = 0x7FFF; - ext_attr->qam_rf_agc_cfg.speed = 3; - ext_attr->qam_rf_agc_cfg.top = 9500; - ext_attr->qam_rf_agc_cfg.cut_off_current = 4000; - ext_attr->qam_pre_saw_cfg.standard = DRX_STANDARD_ITU_B; - ext_attr->qam_pre_saw_cfg.reference = 0x07; - ext_attr->qam_pre_saw_cfg.use_pre_saw = true; -#endif - /* Initialize default AFE configuartion for VSB */ - ext_attr->vsb_rf_agc_cfg.standard = DRX_STANDARD_8VSB; - ext_attr->vsb_rf_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; - ext_attr->vsb_rf_agc_cfg.min_output_level = 0; - ext_attr->vsb_rf_agc_cfg.max_output_level = 0x7FFF; - ext_attr->vsb_rf_agc_cfg.speed = 3; - ext_attr->vsb_rf_agc_cfg.top = 9500; - ext_attr->vsb_rf_agc_cfg.cut_off_current = 4000; - ext_attr->vsb_pre_saw_cfg.standard = DRX_STANDARD_8VSB; - ext_attr->vsb_pre_saw_cfg.reference = 0x07; - ext_attr->vsb_pre_saw_cfg.use_pre_saw = true; - -#ifndef DRXJ_DIGITAL_ONLY - /* Initialize default AFE configuartion for ATV */ - ext_attr->atv_rf_agc_cfg.standard = DRX_STANDARD_NTSC; - ext_attr->atv_rf_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; - ext_attr->atv_rf_agc_cfg.top = 9500; - ext_attr->atv_rf_agc_cfg.cut_off_current = 4000; - ext_attr->atv_rf_agc_cfg.speed = 3; - ext_attr->atv_if_agc_cfg.standard = DRX_STANDARD_NTSC; - ext_attr->atv_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; - ext_attr->atv_if_agc_cfg.speed = 3; - ext_attr->atv_if_agc_cfg.top = 2400; - ext_attr->atv_pre_saw_cfg.reference = 0x0007; - ext_attr->atv_pre_saw_cfg.use_pre_saw = true; - ext_attr->atv_pre_saw_cfg.standard = DRX_STANDARD_NTSC; -#endif + drxj_reset_mode(ext_attr); ext_attr->standard = DRX_STANDARD_UNKNOWN; rc = smart_ant_init(demod);