From: Felipe Balbi Date: Tue, 17 May 2016 11:55:58 +0000 (+0300) Subject: usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ab2a92e7a608c09f13baf1730b9ba24c73c35d52;p=linux-beck.git usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED As a micro-power optimization, let's only resume the USB2 PHY if we're working on <=HIGHSPEED. If we're gonna work on SUPERSPEED or SUPERSPEED+, there's no point in resuming the USB2 PHY. Fixes: 2b0f11df84bb ("usb: dwc3: gadget: clear SUSPHY bit before ep cmds") Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 378c14c45fcb..5e7b2ba8312b 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -258,11 +258,13 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, * We will also set SUSPHY bit to what it was before returning as stated * by the same section on Synopsys databook. */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) { - susphy = true; - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + if (dwc->gadget.speed <= USB_SPEED_HIGH) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) { + susphy = true; + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + } } if (cmd == DWC3_DEPCMD_STARTTRANSFER) {