From: Don Skidmore Date: Tue, 9 Jun 2015 23:18:56 +0000 (-0700) Subject: ixgbe: Restore ESDP settings after MAC reset X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ab5fe0c574edae2831202ce375f8ee2fc6acd002;p=linux-beck.git ixgbe: Restore ESDP settings after MAC reset The I2C mux control relies on the SDP setting in the ESDP register so it is necessary to restore the value after a MAC reset. Combine all this functionality in to a support function. Signed-off-by: Don Skidmore Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index f78cac8b0235..a1d8ab00aa96 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -26,6 +26,22 @@ #include "ixgbe_common.h" #include "ixgbe_phy.h" +/** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control + * @hw: pointer to hardware structure + **/ +static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) +{ + u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + + if (hw->bus.lan_id) { + esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); + esdp |= IXGBE_ESDP_SDP1_DIR; + } + esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); +} + /** ixgbe_identify_phy_x550em - Get PHY type based on device id * @hw: pointer to hardware structure * @@ -33,18 +49,11 @@ */ static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) { - u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - switch (hw->device_id) { case IXGBE_DEV_ID_X550EM_X_SFP: /* set up for CS4227 usage */ hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; - if (hw->bus.lan_id) { - esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); - esdp |= IXGBE_ESDP_SDP1_DIR; - } - esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + ixgbe_setup_mux_ctl(hw); return ixgbe_identify_module_generic(hw); case IXGBE_DEV_ID_X550EM_X_KX4: @@ -1127,18 +1136,10 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) { struct ixgbe_phy_info *phy = &hw->phy; s32 ret_val; - u32 esdp; if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) { - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; - - if (hw->bus.lan_id) { - esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); - esdp |= IXGBE_ESDP_SDP1_DIR; - } - esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + ixgbe_setup_mux_ctl(hw); } /* Identify the PHY or SFP module */ @@ -1366,6 +1367,9 @@ mac_reset_top: hw->mac.num_rar_entries = 128; hw->mac.ops.init_rx_addrs(hw); + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) + ixgbe_setup_mux_ctl(hw); + return status; }