From: Christoph Egger Date: Mon, 5 Jul 2010 13:31:54 +0000 (+0300) Subject: Removing dead OMAP_DSP X-Git-Tag: v2.6.36-rc1~488^2~56 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ab6f775;p=karo-tx-linux.git Removing dead OMAP_DSP OMAP_DSP doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger [tony@atomide.com: updated to apply on top of already queued patches] Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index c9e9e37c5676..5224b67f7f1c 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include @@ -242,138 +241,6 @@ static inline void nokia770_mmc_init(void) } #endif -#if defined(CONFIG_OMAP_DSP) -/* - * audio power control - */ -#define HEADPHONE_GPIO 14 -#define AMPLIFIER_CTRL_GPIO 58 - -static struct clk *dspxor_ck; -static DEFINE_MUTEX(audio_pwr_lock); -/* - * audio_pwr_state - * +--+-------------------------+---------------------------------------+ - * |-1|down |power-up request -> 0 | - * +--+-------------------------+---------------------------------------+ - * | 0|up |power-down(1) request -> 1 | - * | | |power-down(2) request -> (ignore) | - * +--+-------------------------+---------------------------------------+ - * | 1|up, |power-up request -> 0 | - * | |received down(1) request |power-down(2) request -> -1 | - * +--+-------------------------+---------------------------------------+ - */ -static int audio_pwr_state = -1; - -static inline void aic23_power_up(void) -{ -} -static inline void aic23_power_down(void) -{ -} - -/* - * audio_pwr_up / down should be called under audio_pwr_lock - */ -static void nokia770_audio_pwr_up(void) -{ - clk_enable(dspxor_ck); - - /* Turn on codec */ - aic23_power_up(); - - if (gpio_get_value(HEADPHONE_GPIO)) - /* HP not connected, turn on amplifier */ - gpio_set_value(AMPLIFIER_CTRL_GPIO, 1); - else - /* HP connected, do not turn on amplifier */ - printk("HP connected\n"); -} - -static void codec_delayed_power_down(struct work_struct *work) -{ - mutex_lock(&audio_pwr_lock); - if (audio_pwr_state == -1) - aic23_power_down(); - clk_disable(dspxor_ck); - mutex_unlock(&audio_pwr_lock); -} - -static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down); - -static void nokia770_audio_pwr_down(void) -{ - /* Turn off amplifier */ - gpio_set_value(AMPLIFIER_CTRL_GPIO, 0); - - /* Turn off codec: schedule delayed work */ - schedule_delayed_work(&codec_power_down_work, HZ / 20); /* 50ms */ -} - -static int -nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage) -{ - mutex_lock(&audio_pwr_lock); - if (audio_pwr_state == -1) - nokia770_audio_pwr_up(); - /* force audio_pwr_state = 0, even if it was 1. */ - audio_pwr_state = 0; - mutex_unlock(&audio_pwr_lock); - return 0; -} - -static int -nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage) -{ - mutex_lock(&audio_pwr_lock); - switch (stage) { - case 1: - if (audio_pwr_state == 0) - audio_pwr_state = 1; - break; - case 2: - if (audio_pwr_state == 1) { - nokia770_audio_pwr_down(); - audio_pwr_state = -1; - } - break; - } - mutex_unlock(&audio_pwr_lock); - return 0; -} - -static struct dsp_kfunc_device nokia770_audio_device = { - .name = "audio", - .type = DSP_KFUNC_DEV_TYPE_AUDIO, - .enable = nokia770_audio_pwr_up_request, - .disable = nokia770_audio_pwr_down_request, -}; - -static __init int omap_dsp_init(void) -{ - int ret; - - dspxor_ck = clk_get(0, "dspxor_ck"); - if (IS_ERR(dspxor_ck)) { - printk(KERN_ERR "couldn't acquire dspxor_ck\n"); - return PTR_ERR(dspxor_ck); - } - - ret = dsp_kfunc_device_register(&nokia770_audio_device); - if (ret) { - printk(KERN_ERR - "KFUNC device registration faild: %s\n", - nokia770_audio_device.name); - goto out; - } - return 0; - out: - return ret; -} -#else -#define omap_dsp_init() do {} while (0) -#endif /* CONFIG_OMAP_DSP */ - static void __init omap_nokia770_init(void) { platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); @@ -382,7 +249,6 @@ static void __init omap_nokia770_init(void) omap_gpio_init(); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - omap_dsp_init(); hwa742_dev_init(); ads7846_dev_init(); mipid_dev_init(); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 379100c17639..c00d602a2599 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -63,44 +63,7 @@ static void omap_init_rtc(void) static inline void omap_init_rtc(void) {} #endif -#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) - -#if defined(CONFIG_ARCH_OMAP15XX) -# define OMAP1_MBOX_SIZE 0x23 -# define INT_DSP_MAILBOX1 INT_1510_DSP_MAILBOX1 -#elif defined(CONFIG_ARCH_OMAP16XX) -# define OMAP1_MBOX_SIZE 0x2f -# define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1 -#endif - -#define OMAP1_MBOX_BASE OMAP16XX_MAILBOX_BASE - -static struct resource mbox_resources[] = { - { - .start = OMAP1_MBOX_BASE, - .end = OMAP1_MBOX_BASE + OMAP1_MBOX_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_DSP_MAILBOX1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mbox_device = { - .name = "omap1-mailbox", - .id = -1, - .num_resources = ARRAY_SIZE(mbox_resources), - .resource = mbox_resources, -}; - -static inline void omap_init_mbox(void) -{ - platform_device_register(&mbox_device); -} -#else static inline void omap_init_mbox(void) { } -#endif /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index e9bdff192f82..b3a796a6da03 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -23,7 +23,6 @@ #include #include #include -#include #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) @@ -46,7 +45,6 @@ static void omap1_mcbsp_request(unsigned int id) clk_enable(api_clk); clk_enable(dsp_clk); - omap_dsp_request_mem(); /* * DSP external peripheral reset * FIXME: This should be moved to dsp code @@ -62,7 +60,6 @@ static void omap1_mcbsp_free(unsigned int id) { if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (--dsp_use == 0) { - omap_dsp_release_mem(); if (!IS_ERR(api_clk)) { clk_disable(api_clk); clk_put(api_clk); diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index ca5b2290f5a3..d1920be7833b 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -27,70 +27,8 @@ #include #include #include -#include #include -#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) - -static struct dsp_platform_data dsp_pdata = { - .kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list), -}; - -static struct resource omap_dsp_resources[] = { - { - .name = "dsp_mmu", - .start = -1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device omap_dsp_device = { - .name = "dsp", - .id = -1, - .num_resources = ARRAY_SIZE(omap_dsp_resources), - .resource = omap_dsp_resources, - .dev = { - .platform_data = &dsp_pdata, - }, -}; - -static inline void omap_init_dsp(void) -{ - struct resource *res; - int irq; - - if (cpu_is_omap15xx()) - irq = INT_1510_DSP_MMU; - else if (cpu_is_omap16xx()) - irq = INT_1610_DSP_MMU; - else if (cpu_is_omap24xx()) - irq = INT_24XX_DSP_MMU; - - res = platform_get_resource_byname(&omap_dsp_device, - IORESOURCE_IRQ, "dsp_mmu"); - res->start = irq; - - platform_device_register(&omap_dsp_device); -} - -int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev) -{ - static DEFINE_MUTEX(dsp_pdata_lock); - - spin_lock_init(&kdev->lock); - - mutex_lock(&dsp_pdata_lock); - list_add_tail(&kdev->entry, &dsp_pdata.kdev_list); - mutex_unlock(&dsp_pdata_lock); - - return 0; -} -EXPORT_SYMBOL(dsp_kfunc_device_register); - -#else -static inline void omap_init_dsp(void) { } -#endif /* CONFIG_OMAP_DSP */ - /*-------------------------------------------------------------------------*/ #if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE) @@ -359,7 +297,6 @@ static int __init omap_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_dsp(); omap_init_rng(); omap_init_mcpdm(); omap_init_uwire(); diff --git a/arch/arm/plat-omap/include/plat/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h deleted file mode 100644 index da97736f3efa..000000000000 --- a/arch/arm/plat-omap/include/plat/dsp_common.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1) - * - * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved. - * - * Contact: Toshihiro Kobayashi - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef ASM_ARCH_DSP_COMMON_H -#define ASM_ARCH_DSP_COMMON_H - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK) -extern void omap_dsp_request_mpui(void); -extern void omap_dsp_release_mpui(void); -extern int omap_dsp_request_mem(void); -extern int omap_dsp_release_mem(void); -#else -static inline int omap_dsp_request_mem(void) -{ - return 0; -} -#define omap_dsp_release_mem() do {} while (0) -#endif - -#endif /* ASM_ARCH_DSP_COMMON_H */