From: Luis de Bethencourt Date: Wed, 23 Mar 2016 11:35:39 +0000 (+0000) Subject: regulator: add missing description for set_over_current_protection X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=abf2f825d115397944cab91a20c937331d77e37c;p=linux-beck.git regulator: add missing description for set_over_current_protection Over current protection is missing descriptions for documentation. Signed-off-by: Luis de Bethencourt Signed-off-by: Mark Brown --- diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 01d26244a610..1392022fe509 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -93,6 +93,9 @@ struct regulator_linear_range { * @get_current_limit: Get the configured limit for a current-limited regulator. * @set_input_current_limit: Configure an input limit. * + * @set_over_current_protection: Support capability of automatically shutting + * down when detecting an over current event. + * * @set_active_discharge: Set active discharge enable/disable of regulators. * * @set_mode: Set the configured operating mode for the regulator. diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 5d627c83a630..ad3e5158e586 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -97,6 +97,7 @@ struct regulator_state { * @ramp_disable: Disable ramp delay when initialising or when setting voltage. * @soft_start: Enable soft start so that voltage ramps slowly. * @pull_down: Enable pull down when regulator is disabled. + * @over_current_protection: Auto disable on over current event. * * @input_uV: Input voltage for regulator when supplied by another regulator. *