From: Ian Abbott <abbotti@mev.co.uk>
Date: Thu, 27 Nov 2014 11:37:17 +0000 (+0000)
Subject: staging: comedi: adl_pci9118: simplify interrupt_pci9118_ai_dma() a bit
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ac33c20dadf927b7fc96292810007633805a6fe2;p=linux-beck.git

staging: comedi: adl_pci9118: simplify interrupt_pci9118_ai_dma() a bit

Eliminate the `next_dma_buf` variable in `interrupt_pci9118_ai_dma()`.
It holds the next value of `devpriv->dma_actbuf` when double buffering
is used, but we can just set that to the next value directly at the
point where the buffers are switched as the old value is not used
anywhere else.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 5e0ff9db6a47..aecfae891628 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -608,16 +608,15 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
 	struct comedi_cmd *cmd = &s->async->cmd;
 	struct pci9118_dmabuf *dmabuf = &devpriv->dmabuf[devpriv->dma_actbuf];
 	unsigned int nsamples = comedi_bytes_to_samples(s, dmabuf->use_size);
-	unsigned int next_dma_buf;
 
-	if (devpriv->dma_doublebuf) {	/*
-					 * switch DMA buffers if is used
-					 * double buffering
-					 */
-		next_dma_buf = 1 - devpriv->dma_actbuf;
-		pci9118_amcc_setup_dma(dev, next_dma_buf);
-		if (devpriv->ai_do == 4)
-			interrupt_pci9118_ai_mode4_switch(dev, next_dma_buf);
+	/* switch DMA buffers and restart DMA if double buffering */
+	if (devpriv->dma_doublebuf) {
+		devpriv->dma_actbuf = 1 - devpriv->dma_actbuf;
+		pci9118_amcc_setup_dma(dev, devpriv->dma_actbuf);
+		if (devpriv->ai_do == 4) {
+			interrupt_pci9118_ai_mode4_switch(dev,
+							  devpriv->dma_actbuf);
+		}
 	}
 
 	if (nsamples) {
@@ -631,11 +630,8 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
 			s->async->events |= COMEDI_CB_EOA;
 	}
 
-	if (devpriv->dma_doublebuf) {
-		/* switch dma buffers */
-		devpriv->dma_actbuf = 1 - devpriv->dma_actbuf;
-	} else {
-		/* restart DMA if is not used double buffering */
+	/* restart DMA if not double buffering */
+	if (!devpriv->dma_doublebuf) {
 		pci9118_amcc_setup_dma(dev, 0);
 		if (devpriv->ai_do == 4)
 			interrupt_pci9118_ai_mode4_switch(dev, 0);