From: Dirk Behme Date: Sat, 18 Jul 2015 06:02:07 +0000 (+0200) Subject: Documentation: gpio: consumer: describe active low property X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ac49fbd1f9d437cca7234473850aef4165779383;p=linux-beck.git Documentation: gpio: consumer: describe active low property I've been searching for any documentation of 'the active-low property of a GPIO' already mentioned in this documenation. But couldn't find any. Add it. Sigend-off-by: Dirk Behme Acked-by: Alexandre Courbot [Spelling, grammar fixes] Signed-off-by: Linus Walleij --- diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt index 75542b91b766..a206639454ab 100644 --- a/Documentation/gpio/consumer.txt +++ b/Documentation/gpio/consumer.txt @@ -237,6 +237,39 @@ Note that these functions should only be used with great moderation ; a driver should not have to care about the physical line level. +The active-low property +----------------------- + +As a driver should not have to care about the physical line level, all of the +gpiod_set_value_xxx() or gpiod_set_array_value_xxx() functions operate with +the *logical* value. With this they take the active-low property into account. +This means that they check whether the GPIO is configured to be active-low, +and if so, they manipulate the passed value before the physical line level is +driven. + +With this, all the gpiod_set_(array)_value_xxx() functions interpret the +parameter "value" as "active" ("1") or "inactive" ("0"). The physical line +level will be driven accordingly. + +As an example, if the active-low property for a dedicated GPIO is set, and the +gpiod_set_(array)_value_xxx() passes "active" ("1"), the physical line level +will be driven low. + +To summarize: + +Function (example) active-low proporty physical line +gpiod_set_raw_value(desc, 0); don't care low +gpiod_set_raw_value(desc, 1); don't care high +gpiod_set_value(desc, 0); default (active-high) low +gpiod_set_value(desc, 1); default (active-high) high +gpiod_set_value(desc, 0); active-low high +gpiod_set_value(desc, 1); active-low low + +Please note again that the set_raw/get_raw functions should be avoided as much +as possible, especially by drivers which should not care about the actual +physical line level and worry about the logical value instead. + + Set multiple GPIO outputs with a single function call ----------------------------------------------------- The following functions set the output values of an array of GPIOs: