From: Tony Lindgren Date: Tue, 4 Apr 2017 03:15:54 +0000 (-0700) Subject: mfd: cpcap: Fix interrupt to use level interrupt X-Git-Tag: v4.12-rc1~113^2~20 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ac89473213c6;p=karo-tx-linux.git mfd: cpcap: Fix interrupt to use level interrupt I made a mistake assuming the device tree configuration for interrupt triggering was somehow passed to the SPI device but it's not. In the Motorola Linux kernel tree CPCAP PMIC is configured as a rising edge triggered interrupt, but then then it's interrupt handler keeps looping until the GPIO line goes down. So the CPCAP interrupt is clearly a level interrupt and not an edge interrupt. Earlier when I tried to configure it as level interrupt using the device tree, I did not account that the triggering only gets passed to the SPI core and it also needs to be specified in the CPCAP driver when we do devm_regmap_add_irq_chip(). Fixes: 56e1d40d3bea ("mfd: cpcap: Add minimal support") Signed-off-by: Tony Lindgren Acked-by: Charles Keepax Signed-off-by: Lee Jones --- diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c index a9097efcefa5..cd93f5c7b063 100644 --- a/drivers/mfd/motorola-cpcap.c +++ b/drivers/mfd/motorola-cpcap.c @@ -154,7 +154,7 @@ static int cpcap_init_irq_chip(struct cpcap_ddata *cpcap, int irq_chip, ret = devm_regmap_add_irq_chip(&cpcap->spi->dev, cpcap->regmap, cpcap->spi->irq, - IRQF_TRIGGER_RISING | + irq_get_trigger_type(cpcap->spi->irq) | IRQF_SHARED, -1, chip, &cpcap->irqdata[irq_chip]); if (ret) {