From: Magnus Damm Date: Thu, 26 Jul 2007 01:13:21 +0000 (+0900) Subject: sh: intc - avoid SH7710 specific vector on SH7712 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ac919986d7dfc5d1d9f5585521307f222a8ebeaf;p=linux-beck.git sh: intc - avoid SH7710 specific vector on SH7712 This patch makes sure that the sh7710 specific ipsec vector is missing if building for a sh7712. All according to the datasheet. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 93b6d7b42694..8b065aa5f507 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -1,5 +1,5 @@ /* - * SH7710 Setup + * SH3 Setup code for SH7710, SH7712 * * Copyright (C) 2006 Paul Mundt * Copyright (C) 2007 Nobuhiro Iwamatsu @@ -45,7 +45,9 @@ static struct intc_vect vectors[] = { INTC_VECT(SCIF1_ERI, 0x900), INTC_VECT(SCIF1_RXI, 0x920), INTC_VECT(SCIF1_BRI, 0x940), INTC_VECT(SCIF1_TXI, 0x960), INTC_VECT(DMAC_DEI4, 0xb80), INTC_VECT(DMAC_DEI5, 0xba0), +#ifdef CONFIG_CPU_SUBTYPE_SH7710 INTC_VECT(IPSEC, 0xbe0), +#endif INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20), INTC_VECT(EDMAC2, 0xc40), INTC_VECT(SIOF0_ERI, 0xe00), INTC_VECT(SIOF0_TXI, 0xe20), @@ -88,7 +90,10 @@ static struct intc_prio_reg prio_registers[] = { { 0xa4000016, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, { 0xa4000018, 16, 4, /* IPRD */ { 0, 0, IRQ4, IRQ5 } }, { 0xa400001a, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } }, - { 0xa4080000, 16, 4, /* IPRF */ { IPSEC, DMAC2 } }, + { 0xa4080000, 16, 4, /* IPRF */ { 0, DMAC2 } }, +#ifdef CONFIG_CPU_SUBTYPE_SH7710 + { 0xa4080000, 16, 4, /* IPRF */ { IPSEC } }, +#endif { 0xa4080002, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } }, { 0xa4080004, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } }, { 0xa4080006, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },