From: Daniel Vetter Date: Thu, 26 Jul 2012 09:50:05 +0000 (+0200) Subject: drm/i915: rip out sanitize_pm again X-Git-Tag: next-20120904~58^2~32^2~24 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=acbe9475505de68540fab8653131d41d424c4fa3;p=karo-tx-linux.git drm/i915: rip out sanitize_pm again We believe to have squashed all issues around the gen6+ rps interrupt generation and why the gpu sometimes got stuck. With that cleared up, there's no user left for the sanitize_pm infrastructure, so let's just rip it out. Note that 'intel_reg_write 0xa014 0x13070000' is the w/a if we find ourselves stuck again. Acked-by: Chris Wilson Signed-Off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0dc89a42a80a..0b2eb17fb381 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -249,7 +249,6 @@ struct drm_i915_display_funcs { void (*update_wm)(struct drm_device *dev); void (*update_sprite_wm)(struct drm_device *dev, int pipe, uint32_t sprite_width, int pixel_size); - void (*sanitize_pm)(struct drm_device *dev); void (*update_linetime_wm)(struct drm_device *dev, int pipe, struct drm_display_mode *mode); int (*crtc_mode_set)(struct drm_crtc *crtc, diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b463829b92eb..17020cdff338 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5929,13 +5929,11 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc) void intel_mark_busy(struct drm_device *dev) { - intel_sanitize_pm(dev); i915_update_gfx_val(dev->dev_private); } void intel_mark_idle(struct drm_device *dev) { - intel_sanitize_pm(dev); } void intel_mark_fb_busy(struct drm_i915_gem_object *obj) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 8c7f48310842..13f0467c1f4d 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -390,8 +390,6 @@ extern int intel_plane_init(struct drm_device *dev, enum pipe pipe); extern void intel_flush_display_plane(struct drm_i915_private *dev_priv, enum plane plane); -void intel_sanitize_pm(struct drm_device *dev); - /* intel_panel.c */ extern void intel_fixed_panel_mode(struct drm_display_mode *fixed_mode, struct drm_display_mode *adjusted_mode); diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index e8727da06b0b..d0ce894ba6e6 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2267,6 +2267,11 @@ static void ironlake_disable_drps(struct drm_device *dev) } +/* There's a funny hw issue where the hw returns all 0 when reading from + * GEN6_RP_INTERRUPT_LIMITS. Hence we always need to compute the desired value + * ourselves, instead of doing a rmw cycle (which might result in us clearing + * all limits and the gpu stuck at whatever frequency it is at atm). + */ static u32 gen6_rps_limits(struct drm_i915_private *dev_priv, u8 val) { u32 limits; @@ -3750,37 +3755,6 @@ void intel_init_clock_gating(struct drm_device *dev) dev_priv->display.init_pch_clock_gating(dev); } -static void gen6_sanitize_pm(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - u32 limits, current_limits; - - gen6_gt_force_wake_get(dev_priv); - - current_limits = I915_READ(GEN6_RP_INTERRUPT_LIMITS); - /* Make sure we continue to get interrupts - * until we hit the minimum or maximum frequencies. - */ - limits = gen6_rps_limits(dev_priv, dev_priv->cur_delay); - - if (current_limits != limits) { - /* Note that the known failure case is to read back 0. */ - DRM_DEBUG_DRIVER("Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS " - "expected %08x, was %08x\n", limits, current_limits); - I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, limits); - } - - gen6_gt_force_wake_put(dev_priv); -} - -void intel_sanitize_pm(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - - if (dev_priv->display.sanitize_pm) - dev_priv->display.sanitize_pm(dev); -} - /* Starting with Haswell, we have different power wells for * different parts of the GPU. This attempts to enable them all. */ @@ -3866,7 +3840,6 @@ void intel_init_pm(struct drm_device *dev) dev_priv->display.update_wm = NULL; } dev_priv->display.init_clock_gating = gen6_init_clock_gating; - dev_priv->display.sanitize_pm = gen6_sanitize_pm; } else if (IS_IVYBRIDGE(dev)) { /* FIXME: detect B0+ stepping and use auto training */ if (SNB_READ_WM0_LATENCY()) { @@ -3878,7 +3851,6 @@ void intel_init_pm(struct drm_device *dev) dev_priv->display.update_wm = NULL; } dev_priv->display.init_clock_gating = ivybridge_init_clock_gating; - dev_priv->display.sanitize_pm = gen6_sanitize_pm; } else if (IS_HASWELL(dev)) { if (SNB_READ_WM0_LATENCY()) { dev_priv->display.update_wm = sandybridge_update_wm; @@ -3890,7 +3862,6 @@ void intel_init_pm(struct drm_device *dev) dev_priv->display.update_wm = NULL; } dev_priv->display.init_clock_gating = haswell_init_clock_gating; - dev_priv->display.sanitize_pm = gen6_sanitize_pm; } else dev_priv->display.update_wm = NULL; } else if (IS_VALLEYVIEW(dev)) {