From: Yoni Divinsky Date: Wed, 13 Jun 2012 15:56:54 +0000 (+0300) Subject: wlcore: do not report noise level in get survey op X-Git-Tag: next-20120724~65^2~52^2~246^2^2~5 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=add779a0738a6bd199b3c5b9f0f8090036e53ff0;p=karo-tx-linux.git wlcore: do not report noise level in get survey op The get survey op expects the low level driver to report the noise level for a a given channel. The noise calculated in wlcore is (rssi-snr/2), but since the snr reported by the FW is a derivative from the rssi this calculation is useless, and should not be reported to the user space. Reporting incorrect noise, results in the wpa_supplicant miscalculating the roaming candidate priority, thus causing a situation where an AP with a lower rssi level would be chosen over a better AP. Signed-off-by: Yoni Divinsky Signed-off-by: Luciano Coelho --- diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 3279a94163f3..a7c5e32e90db 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4108,16 +4108,13 @@ out: static int wl1271_op_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey) { - struct wl1271 *wl = hw->priv; struct ieee80211_conf *conf = &hw->conf; if (idx != 0) return -ENOENT; survey->channel = conf->channel; - survey->filled = SURVEY_INFO_NOISE_DBM; - survey->noise = wl->noise; - + survey->filled = 0; return 0; }