From: Alan Stern Date: Tue, 28 Feb 2006 15:16:12 +0000 (-0500) Subject: [PATCH] USB: UHCI: Increase port-reset completion delay for HP controllers X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ae55717584431761b70215d3d574c13fe97093f2;p=mv-sheeva.git [PATCH] USB: UHCI: Increase port-reset completion delay for HP controllers This patch (as657) increases the port-reset completion delay in uhci-hcd for HP's embedded controllers. Unlike other UHCI controllers, the HP chips can take as long as 250 us to carry out the processing associated with finishing a port reset. This fixes Novell bug #148761. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index a71e48a6680..152971d1676 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -99,6 +99,21 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, } } +/* Wait for the UHCI controller in HP's iLO2 server management chip. + * It can take up to 250 us to finish a reset and set the CSC bit. + */ +static void wait_for_HP(unsigned long port_addr) +{ + int i; + + for (i = 10; i < 250; i += 10) { + if (inw(port_addr) & USBPORTSC_CSC) + return; + udelay(10); + } + /* Log a warning? */ +} + static void uhci_check_ports(struct uhci_hcd *uhci) { unsigned int port; @@ -113,6 +128,12 @@ static void uhci_check_ports(struct uhci_hcd *uhci) CLR_RH_PORTSTAT(USBPORTSC_PR); udelay(10); + /* HP's server management chip requires + * a longer delay. */ + if (to_pci_dev(uhci_dev(uhci))->vendor == + PCI_VENDOR_ID_HP) + wait_for_HP(port_addr); + /* If the port was enabled before, turning * reset on caused a port enable change. * Turning reset off causes a port connect