From: Srinivas Kandagatla Date: Mon, 2 Jun 2014 09:09:39 +0000 (+0100) Subject: mmc: mmci: Add support to data commands via variant structure. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ae7b0061f61e7c96884f4080b4e28544a0cedd76;p=linux-beck.git mmc: mmci: Add support to data commands via variant structure. On some SOCs like Qcom there are explicit bits in the command register to specify if its a data transfer command or not. So this patch adds support to such bits in variant data, giving more flexibility to the driver. Signed-off-by: Srinivas Kandagatla Reviewed-by: Linus Walleij Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 5228c5de334d..0a8cdac1f59c 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -59,6 +59,7 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY * is asserted (likewise for RX) + * @data_cmd_enable: enable value for data commands. * @sdio: variant supports SDIO * @st_clkdiv: true if using a ST-specific clock divider algorithm * @datactrl_mask_ddrmode: ddr mode mask in datactrl register. @@ -79,6 +80,7 @@ struct variant_data { unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; + unsigned int data_cmd_enable; unsigned int datactrl_mask_ddrmode; bool sdio; bool st_clkdiv; @@ -841,6 +843,9 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) if (/*interrupt*/0) c |= MCI_CPSM_INTERRUPT; + if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) + c |= host->variant->data_cmd_enable; + host->cmd = cmd; writel(cmd->arg, base + MMCIARGUMENT);