From: Daniel Vetter Date: Wed, 25 Jan 2017 06:26:48 +0000 (+0100) Subject: drm/doc: Clarify connector overview X-Git-Tag: v4.11-rc1~83^2~32^2~30 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=aec97460e9001816deed33770e1e30435aa24809;p=karo-tx-linux.git drm/doc: Clarify connector overview There was a bit of mix-up between initialization and registering. v2: Review from Gustavo. Reviewed-by: Gustavo Padovan Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-7-daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-8-daniel.vetter@ffwll.ch --- diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index dd720d4cb4f7..e4d2c8a49076 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -40,11 +40,10 @@ * * KMS driver must create, initialize, register and attach at a &struct * drm_connector for each such sink. The instance is created as other KMS - * objects and initialized by setting the following fields. - * - * The connector is then registered with a call to drm_connector_init() with a - * pointer to the connector functions and a connector type, and exposed through - * sysfs with a call to drm_connector_register(). + * objects and initialized by setting the following fields. The connector is + * initialized with a call to drm_connector_init() with a pointer to the + * &struct drm_connector_funcs and a connector type, and then exposed to + * userspace with a call to drm_connector_register(). * * Connectors must be attached to an encoder to be used. For devices that map * connectors to encoders 1:1, the connector should be attached at