From: Guennadi Liakhovetski Date: Wed, 16 Jan 2013 07:54:18 +0000 (+0100) Subject: ARM: shmobile: use GPIO SD-card detection on armadillo800eva X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=aee14423e79eddf3c4fa97d7015164d150b75e45;p=linux-beck.git ARM: shmobile: use GPIO SD-card detection on armadillo800eva Switch SDHI0 and SDHI1 SD-card interfaces on armadillo800eva to using GPIO card detection, which provides maximum power saving and automatically selects IRQ or polling mode, depending on the CD GPIO capability. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Acked-by: Linus Walleij Signed-off-by: Simon Horman --- diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 04eff93df793..60694e866d1a 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -579,10 +579,10 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] = static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\ - MMC_CAP_NEEDS_POLL, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PORT167, }; static struct resource sdhi0_resources[] = { @@ -623,7 +623,9 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + /* Port72 cannot generate IRQs, will be used in polling mode. */ + .cd_gpio = GPIO_PORT72, }; static struct resource sdhi1_resources[] = {