From: Jeff Garzik Date: Tue, 24 Jul 2007 05:30:36 +0000 (-0400) Subject: [netdrvr] skfp: remove a bunch of dead code X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=af096046f63a065b692018cd4b8f5e7525c3e56a;p=linux-beck.git [netdrvr] skfp: remove a bunch of dead code The driver has not compiled in anything except PCI support for many years (see drivers/net/skfp/Makefile). This driver is also unmaintained for many years, so arguments for keeping the cross-OS, cross-bus (ISA, EISA, MCA) code do not exist. Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/skfp/drvfbi.c b/drivers/net/skfp/drvfbi.c index 4fe624b0dd25..be2ee6519ef2 100644 --- a/drivers/net/skfp/drvfbi.c +++ b/drivers/net/skfp/drvfbi.c @@ -43,25 +43,6 @@ static const char ID_sccs[] = "@(#)drvfbi.c 1.63 99/02/11 (C) SK " ; /* * valid configuration values are: */ -#ifdef ISA -const int opt_ints[] = {8, 3, 4, 5, 9, 10, 11, 12, 15} ; -const int opt_iops[] = {8, - 0x100, 0x120, 0x180, 0x1a0, 0x220, 0x240, 0x320, 0x340}; -const int opt_dmas[] = {4, 3, 5, 6, 7} ; -const int opt_eproms[] = {15, 0xc0, 0xc2, 0xc4, 0xc6, 0xc8, 0xca, 0xcc, 0xce, - 0xd0, 0xd2, 0xd4, 0xd6, 0xd8, 0xda, 0xdc} ; -#endif -#ifdef EISA -const int opt_ints[] = {5, 9, 10, 11} ; -const int opt_dmas[] = {0, 5, 6, 7} ; -const int opt_eproms[] = {0xc0, 0xc2, 0xc4, 0xc6, 0xc8, 0xca, 0xcc, 0xce, - 0xd0, 0xd2, 0xd4, 0xd6, 0xd8, 0xda, 0xdc} ; -#endif - -#ifdef MCA -int opt_ints[] = {3, 11, 10, 9} ; /* FM1 */ -int opt_eproms[] = {0, 0xc4, 0xc8, 0xcc, 0xd0, 0xd4, 0xd8, 0xdc} ; -#endif /* MCA */ /* * xPOS_ID:xxxx @@ -78,17 +59,9 @@ int opt_eproms[] = {0, 0xc4, 0xc8, 0xcc, 0xd0, 0xd4, 0xd8, 0xdc} ; */ #ifndef MULT_OEM #ifndef OEM_CONCEPT -#ifndef MCA const u_char oem_id[] = "xPOS_ID:xxxx" ; -#else -const u_char oem_id[] = "xPOSID1:xxxx" ; /* FM1 card id. */ -#endif #else /* OEM_CONCEPT */ -#ifndef MCA const u_char oem_id[] = OEM_ID ; -#else -const u_char oem_id[] = OEM_ID1 ; /* FM1 card id. */ -#endif /* MCA */ #endif /* OEM_CONCEPT */ #define ID_BYTE0 8 #define OEMID(smc,i) oem_id[ID_BYTE0 + i] @@ -109,23 +82,6 @@ extern int AIX_vpdReadByte() ; /* Prototype of a local function. */ static void smt_stop_watchdog(struct s_smc *smc); -#ifdef MCA -static int read_card_id() ; -static void DisableSlotAccess() ; -static void EnableSlotAccess() ; -#ifdef AIX -extern int attach_POS_addr() ; -extern int detach_POS_addr() ; -extern u_char read_POS() ; -extern void write_POS() ; -extern int AIX_vpdReadByte() ; -#else -#define read_POS(smc,a1,a2) ((u_char) inp(a1)) -#define write_POS(smc,a1,a2,a3) outp((a1),(a3)) -#endif -#endif /* MCA */ - - /* * FDDI card reset */ @@ -139,51 +95,6 @@ static void card_start(struct s_smc *smc) smt_stop_watchdog(smc) ; -#ifdef ISA - outpw(CSR_A,0) ; /* reset for all chips */ - for (i = 10 ; i ; i--) /* delay for PLC's */ - (void)inpw(ISR_A) ; - OUT_82c54_TIMER(3,COUNT(2) | RW_OP(3) | TMODE(2)) ; - /* counter 2, mode 2 */ - OUT_82c54_TIMER(2,97) ; /* LSB */ - OUT_82c54_TIMER(2,0) ; /* MSB ( 15.6 us ) */ - outpw(CSR_A,CS_CRESET) ; -#endif -#ifdef EISA - outpw(CSR_A,0) ; /* reset for all chips */ - for (i = 10 ; i ; i--) /* delay for PLC's */ - (void)inpw(ISR_A) ; - outpw(CSR_A,CS_CRESET) ; - smc->hw.led = (2<<6) ; - outpw(CSR_A,CS_CRESET | smc->hw.led) ; -#endif -#ifdef MCA - outp(ADDR(CARD_DIS),0) ; /* reset for all chips */ - for (i = 10 ; i ; i--) /* delay for PLC's */ - (void)inpw(ISR_A) ; - outp(ADDR(CARD_EN),0) ; - /* first I/O after reset must not be a access to FORMAC or PLC */ - - /* - * bus timeout (MCA) - */ - OUT_82c54_TIMER(3,COUNT(2) | RW_OP(3) | TMODE(3)) ; - /* counter 2, mode 3 */ - OUT_82c54_TIMER(2,(2*24)) ; /* 3.9 us * 2 square wave */ - OUT_82c54_TIMER(2,0) ; /* MSB */ - - /* POS 102 indicated an activ Check Line or Buss Error monitoring */ - if (inpw(CSA_A) & (POS_EN_CHKINT | POS_EN_BUS_ERR)) { - outp(ADDR(IRQ_CHCK_EN),0) ; - } - - if (!((i = inpw(CSR_A)) & CS_SAS)) { - if (!(i & CS_BYSTAT)) { - outp(ADDR(BYPASS(STAT_INS)),0) ;/* insert station */ - } - } - outpw(LEDR_A,LED_1) ; /* yellow */ -#endif /* MCA */ #ifdef PCI /* * make sure no transfer activity is pending @@ -253,15 +164,7 @@ void card_stop(struct s_smc *smc) { smt_stop_watchdog(smc) ; smc->hw.mac_ring_is_up = 0 ; /* ring down */ -#ifdef ISA - outpw(CSR_A,0) ; /* reset for all chips */ -#endif -#ifdef EISA - outpw(CSR_A,0) ; /* reset for all chips */ -#endif -#ifdef MCA - outp(ADDR(CARD_DIS),0) ; /* reset for all chips */ -#endif + #ifdef PCI /* * make sure no transfer activity is pending @@ -284,60 +187,6 @@ void mac1_irq(struct s_smc *smc, u_short stu, u_short stl) { int restart_tx = 0 ; again: -#ifndef PCI -#ifndef ISA -/* - * FORMAC+ bug modified the queue pointer if many read/write accesses happens!? - */ - if (stl & (FM_SPCEPDS | /* parit/coding err. syn.q.*/ - FM_SPCEPDA0 | /* parit/coding err. a.q.0 */ - FM_SPCEPDA1 | /* parit/coding err. a.q.1 */ - FM_SPCEPDA2)) { /* parit/coding err. a.q.2 */ - SMT_PANIC(smc,SMT_E0132, SMT_E0132_MSG) ; - } - if (stl & (FM_STBURS | /* tx buffer underrun syn.q.*/ - FM_STBURA0 | /* tx buffer underrun a.q.0 */ - FM_STBURA1 | /* tx buffer underrun a.q.1 */ - FM_STBURA2)) { /* tx buffer underrun a.q.2 */ - SMT_PANIC(smc,SMT_E0133, SMT_E0133_MSG) ; - } -#endif - if ( (stu & (FM_SXMTABT | /* transmit abort */ -#ifdef SYNC - FM_STXABRS | /* syn. tx abort */ -#endif /* SYNC */ - FM_STXABRA0)) || /* asyn. tx abort */ - (stl & (FM_SQLCKS | /* lock for syn. q. */ - FM_SQLCKA0)) ) { /* lock for asyn. q. */ - formac_tx_restart(smc) ; /* init tx */ - restart_tx = 1 ; - stu = inpw(FM_A(FM_ST1U)) ; - stl = inpw(FM_A(FM_ST1L)) ; - stu &= ~ (FM_STECFRMA0 | FM_STEFRMA0 | FM_STEFRMS) ; - if (stu || stl) - goto again ; - } - -#ifndef SYNC - if (stu & (FM_STECFRMA0 | /* end of chain asyn tx */ - FM_STEFRMA0)) { /* end of frame asyn tx */ - /* free tx_queue */ - smc->hw.n_a_send = 0 ; - if (++smc->hw.fp.tx_free < smc->hw.fp.tx_max) { - start_next_send(smc); - } - restart_tx = 1 ; - } -#else /* SYNC */ - if (stu & (FM_STEFRMA0 | /* end of asyn tx */ - FM_STEFRMS)) { /* end of sync tx */ - restart_tx = 1 ; - } -#endif /* SYNC */ - if (restart_tx) - llc_restart_tx(smc) ; -} -#else /* PCI */ /* * parity error: note encoding error is not possible in tag mode @@ -378,7 +227,7 @@ again: if (restart_tx) llc_restart_tx(smc) ; } -#endif /* PCI */ + /* * interrupt source= plc1 * this function is called in nwfbisr.asm @@ -387,10 +236,6 @@ void plc1_irq(struct s_smc *smc) { u_short st = inpw(PLC(PB,PL_INTR_EVENT)) ; -#if (defined(ISA) || defined(EISA)) - /* reset PLC Int. bits */ - outpw(PLC1_I,inpw(PLC1_I)) ; -#endif plc_irq(smc,PB,st) ; } @@ -402,10 +247,6 @@ void plc2_irq(struct s_smc *smc) { u_short st = inpw(PLC(PA,PL_INTR_EVENT)) ; -#if (defined(ISA) || defined(EISA)) - /* reset PLC Int. bits */ - outpw(PLC2_I,inpw(PLC2_I)) ; -#endif plc_irq(smc,PA,st) ; } @@ -446,43 +287,15 @@ void read_address(struct s_smc *smc, u_char *mac_addr) char PmdType ; int i ; -#if (defined(ISA) || defined(MCA)) - for (i = 0; i < 4 ;i++) { /* read mac address from board */ - smc->hw.fddi_phys_addr.a[i] = - bitrev8(inpw(PR_A(i+SA_MAC))); - } - for (i = 4; i < 6; i++) { - smc->hw.fddi_phys_addr.a[i] = - bitrev8(inpw(PR_A(i+SA_MAC+PRA_OFF))); - } -#endif -#ifdef EISA - /* - * Note: We get trouble on an Alpha machine if we make a inpw() - * instead of inp() - */ - for (i = 0; i < 4 ;i++) { /* read mac address from board */ - smc->hw.fddi_phys_addr.a[i] = - bitrev8(inp(PR_A(i+SA_MAC))); - } - for (i = 4; i < 6; i++) { - smc->hw.fddi_phys_addr.a[i] = - bitrev8(inp(PR_A(i+SA_MAC+PRA_OFF))); - } -#endif #ifdef PCI for (i = 0; i < 6; i++) { /* read mac address from board */ smc->hw.fddi_phys_addr.a[i] = bitrev8(inp(ADDR(B2_MAC_0+i))); } #endif -#ifndef PCI - ConnectorType = inpw(PR_A(SA_PMD_TYPE)) & 0xff ; - PmdType = inpw(PR_A(SA_PMD_TYPE+1)) & 0xff ; -#else + ConnectorType = inp(ADDR(B2_CONN_TYP)) ; PmdType = inp(ADDR(B2_PMD_TYP)) ; -#endif smc->y[PA].pmd_type[PMD_SK_CONN] = smc->y[PB].pmd_type[PMD_SK_CONN] = ConnectorType ; @@ -512,20 +325,12 @@ void init_board(struct s_smc *smc, u_char *mac_addr) card_start(smc) ; read_address(smc,mac_addr) ; -#ifndef PCI - if (inpw(CSR_A) & CS_SAS) -#else if (!(inp(ADDR(B0_DAS)) & DAS_AVAIL)) -#endif smc->s.sas = SMT_SAS ; /* Single att. station */ else smc->s.sas = SMT_DAS ; /* Dual att. station */ -#ifndef PCI - if (inpw(CSR_A) & CS_BYSTAT) -#else if (!(inp(ADDR(B0_DAS)) & DAS_BYP_ST)) -#endif smc->mib.fddiSMTBypassPresent = 0 ; /* without opt. bypass */ else @@ -538,42 +343,12 @@ void init_board(struct s_smc *smc, u_char *mac_addr) */ void sm_pm_bypass_req(struct s_smc *smc, int mode) { -#if (defined(ISA) || defined(EISA)) - int csra_v ; -#endif - DB_ECMN(1,"ECM : sm_pm_bypass_req(%s)\n",(mode == BP_INSERT) ? "BP_INSERT" : "BP_DEINSERT",0) ; if (smc->s.sas != SMT_DAS) return ; -#if (defined(ISA) || defined(EISA)) - - csra_v = inpw(CSR_A) & ~CS_BYPASS ; -#ifdef EISA - csra_v |= smc->hw.led ; -#endif - - switch(mode) { - case BP_INSERT : - outpw(CSR_A,csra_v | CS_BYPASS) ; - break ; - case BP_DEINSERT : - outpw(CSR_A,csra_v) ; - break ; - } -#endif /* ISA / EISA */ -#ifdef MCA - switch(mode) { - case BP_INSERT : - outp(ADDR(BYPASS(STAT_INS)),0) ;/* insert station */ - break ; - case BP_DEINSERT : - outp(ADDR(BYPASS(STAT_BYP)),0) ; /* bypass station */ - break ; - } -#endif #ifdef PCI switch(mode) { case BP_INSERT : @@ -591,31 +366,14 @@ void sm_pm_bypass_req(struct s_smc *smc, int mode) */ int sm_pm_bypass_present(struct s_smc *smc) { -#ifndef PCI - return( (inpw(CSR_A) & CS_BYSTAT) ? FALSE : TRUE ) ; -#else return( (inp(ADDR(B0_DAS)) & DAS_BYP_ST) ? TRUE: FALSE) ; -#endif } void plc_clear_irq(struct s_smc *smc, int p) { SK_UNUSED(p) ; -#if (defined(ISA) || defined(EISA)) - switch (p) { - case PA : - /* reset PLC Int. bits */ - outpw(PLC2_I,inpw(PLC2_I)) ; - break ; - case PB : - /* reset PLC Int. bits */ - outpw(PLC1_I,inpw(PLC1_I)) ; - break ; - } -#else SK_UNUSED(smc) ; -#endif } @@ -645,51 +403,6 @@ static void led_indication(struct s_smc *smc, int led_event) phy = &smc->y[PB] ; mib_b = phy->mib ; -#ifdef EISA - /* Ring up = yellow led OFF*/ - if (led_event == LED_Y_ON) { - smc->hw.led |= CS_LED_1 ; - } - else if (led_event == LED_Y_OFF) { - smc->hw.led &= ~CS_LED_1 ; - } - else { - /* Link at Port A or B = green led ON */ - if (mib_a->fddiPORTPCMState == PC8_ACTIVE || - mib_b->fddiPORTPCMState == PC8_ACTIVE) { - smc->hw.led |= CS_LED_0 ; - } - else { - smc->hw.led &= ~CS_LED_0 ; - } - } -#endif -#ifdef MCA - led_state = inpw(LEDR_A) ; - - /* Ring up = yellow led OFF*/ - if (led_event == LED_Y_ON) { - led_state |= LED_1 ; - } - else if (led_event == LED_Y_OFF) { - led_state &= ~LED_1 ; - } - else { - led_state &= ~(LED_2|LED_0) ; - - /* Link at Port A = green led A ON */ - if (mib_a->fddiPORTPCMState == PC8_ACTIVE) { - led_state |= LED_2 ; - } - - /* Link at Port B/S = green led B ON */ - if (mib_b->fddiPORTPCMState == PC8_ACTIVE) { - led_state |= LED_0 ; - } - } - - outpw(LEDR_A, led_state) ; -#endif /* MCA */ #ifdef PCI led_state = 0 ; @@ -824,406 +537,6 @@ int set_oi_id_def(struct s_smc *smc) } #endif /* MULT_OEM */ - -#ifdef MCA -/************************ - * - * BEGIN_MANUAL_ENTRY() - * - * exist_board - * - * Check if an MCA board is present in the specified slot. - * - * int exist_board( - * struct s_smc *smc, - * int slot) ; - * In - * smc - A pointer to the SMT Context struct. - * - * slot - The number of the slot to inspect. - * Out - * 0 = No adapter present. - * 1 = Found FM1 adapter. - * - * Pseudo - * Read MCA ID - * for all valid OEM_IDs - * compare with ID read - * if equal, return 1 - * return(0 - * - * Note - * The smc pointer must be valid now. - * - * END_MANUAL_ENTRY() - * - ************************/ -#define LONG_CARD_ID(lo, hi) ((((hi) & 0xff) << 8) | ((lo) & 0xff)) -int exist_board(struct s_smc *smc, int slot) -{ -#ifdef MULT_OEM - SK_LOC_DECL(u_char,id[2]) ; - int idi ; -#endif /* MULT_OEM */ - - /* No longer valid. */ - if (smc == NULL) - return(0) ; - -#ifndef MULT_OEM - if (read_card_id(smc, slot) - == LONG_CARD_ID(OEMID(smc,0), OEMID(smc,1))) - return (1) ; /* Found FM adapter. */ - -#else /* MULT_OEM */ - idi = read_card_id(smc, slot) ; - id[0] = idi & 0xff ; - id[1] = idi >> 8 ; - - smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[0] ; - for (; smc->hw.oem_id->oi_status != OI_STAT_LAST; smc->hw.oem_id++) { - if (smc->hw.oem_id->oi_status < smc->hw.oem_min_status) - continue ; - - if (is_equal_num(&id[0],&OEMID(smc,0),2)) - return (1) ; - } -#endif /* MULT_OEM */ - return (0) ; /* No adapter found. */ -} - -/************************ - * - * read_card_id - * - * Read the MCA card id from the specified slot. - * In - * smc - A pointer to the SMT Context struct. - * CAVEAT: This pointer may be NULL and *must not* be used within this - * function. It's only purpose is for drivers that need some information - * for the inp() and outp() macros. - * - * slot - The number of the slot for which the card id is returned. - * Out - * Returns the card id read from the specified slot. If an illegal slot - * number is specified, the function returns zero. - * - ************************/ -static int read_card_id(struct s_smc *smc, int slot) -/* struct s_smc *smc ; Do not use. */ -{ - int card_id ; - - SK_UNUSED(smc) ; /* Make LINT happy. */ - if ((slot < 1) || (slot > 15)) /* max 16 slots, 0 = motherboard */ - return (0) ; /* Illegal slot number specified. */ - - EnableSlotAccess(smc, slot) ; - - card_id = ((read_POS(smc,POS_ID_HIGH,slot - 1) & 0xff) << 8) | - (read_POS(smc,POS_ID_LOW,slot - 1) & 0xff) ; - - DisableSlotAccess(smc) ; - - return (card_id) ; -} - -/************************ - * - * BEGIN_MANUAL_ENTRY() - * - * get_board_para - * - * Get adapter configuration information. Fill all board specific - * parameters within the 'smc' structure. - * - * int get_board_para( - * struct s_smc *smc, - * int slot) ; - * In - * smc - A pointer to the SMT Context struct, to which this function will - * write some adapter configuration data. - * - * slot - The number of the slot, in which the adapter is installed. - * Out - * 0 = No adapter present. - * 1 = Ok. - * 2 = Adapter present, but card enable bit not set. - * - * END_MANUAL_ENTRY() - * - ************************/ -int get_board_para(struct s_smc *smc, int slot) -{ - int val ; - int i ; - - /* Check if adapter present & get type of adapter. */ - switch (exist_board(smc, slot)) { - case 0: /* Adapter not present. */ - return (0) ; - case 1: /* FM Rev. 1 */ - smc->hw.rev = FM1_REV ; - smc->hw.VFullRead = 0x0a ; - smc->hw.VFullWrite = 0x05 ; - smc->hw.DmaWriteExtraBytes = 8 ; /* 2 extra words. */ - break ; - } - smc->hw.slot = slot ; - - EnableSlotAccess(smc, slot) ; - - if (!(read_POS(smc,POS_102, slot - 1) & POS_CARD_EN)) { - DisableSlotAccess(smc) ; - return (2) ; /* Card enable bit not set. */ - } - - val = read_POS(smc,POS_104, slot - 1) ; /* I/O, IRQ */ - -#ifndef MEM_MAPPED_IO /* is defined by the operating system */ - i = val & POS_IOSEL ; /* I/O base addr. (0x0200 .. 0xfe00) */ - smc->hw.iop = (i + 1) * 0x0400 - 0x200 ; -#endif - i = ((val & POS_IRQSEL) >> 6) & 0x03 ; /* IRQ <0, 1> */ - smc->hw.irq = opt_ints[i] ; - - /* FPROM base addr. */ - i = ((read_POS(smc,POS_103, slot - 1) & POS_MSEL) >> 4) & 0x07 ; - smc->hw.eprom = opt_eproms[i] ; - - DisableSlotAccess(smc) ; - - /* before this, the smc->hw.iop must be set !!! */ - smc->hw.slot_32 = inpw(CSF_A) & SLOT_32 ; - - return (1) ; -} - -/* Enable access to specified MCA slot. */ -static void EnableSlotAccess(struct s_smc *smc, int slot) -{ - SK_UNUSED(slot) ; - -#ifndef AIX - SK_UNUSED(smc) ; - - /* System mode. */ - outp(POS_SYS_SETUP, POS_SYSTEM) ; - - /* Select slot. */ - outp(POS_CHANNEL_POS, POS_CHANNEL_BIT | (slot-1)) ; -#else - attach_POS_addr (smc) ; -#endif -} - -/* Disable access to MCA slot formerly enabled via EnableSlotAccess(). */ -static void DisableSlotAccess(struct s_smc *smc) -{ -#ifndef AIX - SK_UNUSED(smc) ; - - outp(POS_CHANNEL_POS, 0) ; -#else - detach_POS_addr (smc) ; -#endif -} -#endif /* MCA */ - -#ifdef EISA -#ifndef MEM_MAPPED_IO -#define SADDR(slot) (((slot)<<12)&0xf000) -#else /* MEM_MAPPED_IO */ -#define SADDR(slot) (smc->hw.iop) -#endif /* MEM_MAPPED_IO */ - -/************************ - * - * BEGIN_MANUAL_ENTRY() - * - * exist_board - * - * Check if an EISA board is present in the specified slot. - * - * int exist_board( - * struct s_smc *smc, - * int slot) ; - * In - * smc - A pointer to the SMT Context struct. - * - * slot - The number of the slot to inspect. - * Out - * 0 = No adapter present. - * 1 = Found adapter. - * - * Pseudo - * Read EISA ID - * for all valid OEM_IDs - * compare with ID read - * if equal, return 1 - * return(0 - * - * Note - * The smc pointer must be valid now. - * - ************************/ -int exist_board(struct s_smc *smc, int slot) -{ - int i ; -#ifdef MULT_OEM - SK_LOC_DECL(u_char,id[4]) ; -#endif /* MULT_OEM */ - - /* No longer valid. */ - if (smc == NULL) - return(0); - - SK_UNUSED(slot) ; - -#ifndef MULT_OEM - for (i = 0 ; i < 4 ; i++) { - if (inp(SADDR(slot)+PRA(i)) != OEMID(smc,i)) - return(0) ; - } - return(1) ; -#else /* MULT_OEM */ - for (i = 0 ; i < 4 ; i++) - id[i] = inp(SADDR(slot)+PRA(i)) ; - - smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[0] ; - - for (; smc->hw.oem_id->oi_status != OI_STAT_LAST; smc->hw.oem_id++) { - if (smc->hw.oem_id->oi_status < smc->hw.oem_min_status) - continue ; - - if (is_equal_num(&id[0],&OEMID(smc,0),4)) - return (1) ; - } - return (0) ; /* No adapter found. */ -#endif /* MULT_OEM */ -} - - -int get_board_para(struct s_smc *smc, int slot) -{ - int i ; - - if (!exist_board(smc,slot)) - return(0) ; - - smc->hw.slot = slot ; -#ifndef MEM_MAPPED_IO /* if defined by the operating system */ - smc->hw.iop = SADDR(slot) ; -#endif - - if (!(inp(C0_A(0))&CFG_CARD_EN)) { - return(2) ; /* CFG_CARD_EN bit not set! */ - } - - smc->hw.irq = opt_ints[(inp(C1_A(0)) & CFG_IRQ_SEL)] ; - smc->hw.dma = opt_dmas[((inp(C1_A(0)) & CFG_DRQ_SEL)>>3)] ; - - if ((i = inp(C2_A(0)) & CFG_EPROM_SEL) != 0x0f) - smc->hw.eprom = opt_eproms[i] ; - else - smc->hw.eprom = 0 ; - - smc->hw.DmaWriteExtraBytes = 8 ; - - return(1) ; -} -#endif /* EISA */ - -#ifdef ISA -#ifndef MULT_OEM -const u_char sklogo[6] = SKLOGO_STR ; -#define SIZE_SKLOGO(smc) sizeof(sklogo) -#define SKLOGO(smc,i) sklogo[i] -#else /* MULT_OEM */ -#define SIZE_SKLOGO(smc) smc->hw.oem_id->oi_logo_len -#define SKLOGO(smc,i) smc->hw.oem_id->oi_logo[i] -#endif /* MULT_OEM */ - - -int exist_board(struct s_smc *smc, HW_PTR port) -{ - int i ; -#ifdef MULT_OEM - int bytes_read ; - u_char board_logo[15] ; - SK_LOC_DECL(u_char,id[4]) ; -#endif /* MULT_OEM */ - - /* No longer valid. */ - if (smc == NULL) - return(0); - - SK_UNUSED(smc) ; -#ifndef MULT_OEM - for (i = SADDRL ; i < (signed) (SADDRL+SIZE_SKLOGO(smc)) ; i++) { - if ((u_char)inpw((PRA(i)+port)) != SKLOGO(smc,i-SADDRL)) { - return(0) ; - } - } - - /* check MAC address (S&K or other) */ - for (i = 0 ; i < 3 ; i++) { - if ((u_char)inpw((PRA(i)+port)) != OEMID(smc,i)) - return(0) ; - } - return(1) ; -#else /* MULT_OEM */ - smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[0] ; - board_logo[0] = (u_char)inpw((PRA(SADDRL)+port)) ; - bytes_read = 1 ; - - for (; smc->hw.oem_id->oi_status != OI_STAT_LAST; smc->hw.oem_id++) { - if (smc->hw.oem_id->oi_status < smc->hw.oem_min_status) - continue ; - - /* Test all read bytes with current OEM_entry */ - /* for (i=0; (ihw.iop) -#define ADDRS(smc,a) ((a)+(smc)->hw.iop) -#endif - -/* - * FDDI-Fx (x := {I(SA), E(ISA), M(CA), P(CI)}) + * FDDI-Fx (x := {I(SA), P(CI)}) * address calculation & function defines */ -#ifdef EISA - -/* - * Configuration PROM: !! all 8-Bit IO's !! - * |<- MAC-Address ->| - * /-+--+--+--+--+-//-+--+--+--+--+-//-+--+--+--+--+-//-+--+--+--+--+-/ - * val: |PROD_ID0..3| | free | |00|00|5A|40| |nn|mm|00|00| - * /-+--+--+--+--+-//-+--+--+--+--+-//-+--+--+--+--+-//-+--+--+--+--+-/ - * IO- ^ ^ ^ ^ ^ - * port 0C80 0C83 0C88 0C90 0C98 - * | \ - * | \ - * | \______________________________________________ - * EISA Expansion Board Product ID: \ - * BIT: |7 6 5 4 3 2 1 0| \ - * | PROD_ID0 | PROD_ID1 | PROD_ID2 | PROD_ID3 | - * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - * |0| MAN_C0 | MAN_C1 | MAN_C2 | PROD1 | PROD0 | REV1 | REV0 | - * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - * ^=reserved | product numb. | revision numb | - * MAN_Cx = compressed manufacterer code (x:=0..2) - * ASCII : 'A'..'Z' : 0x41..0x5A -> compr.(c-0x40) : 0x01..0x1A (5Bits!) - */ - -#ifndef MULT_OEM -#ifndef OEM_CONCEPT -#define MAN_C0 ('S'-0x40) -#define MAN_C1 ('K'-0x40) -#define MAN_C2 ('D'-0x40) -#define PROD_ID0 (u_char)((MAN_C0<<2) | (MAN_C1>>3)) -#define PROD_ID1 (u_char)(((MAN_C1<<5) & 0xff) | MAN_C2) -#define PROD_ID2 (u_char)(1) /* prod. nr. */ -#define PROD_ID3 (u_char)(0) /* rev. nr. */ - -#ifndef OEM_USER_DATA -#define OEM_USER_DATA "SK-NET FDDI V2.0 Userdata" -#endif -#else /* OEM_CONCEPT */ - -/* MAN_C(0|1|2) no longer present (ra). */ -#define PROD_ID0 (u_char)OEM_PROD_ID0 -#define PROD_ID1 (u_char)OEM_PROD_ID1 -#define PROD_ID2 (u_char)OEM_PROD_ID2 -#define PROD_ID3 (u_char)OEM_PROD_ID3 -#endif /* OEM_CONCEPT */ - -#define SKLOGO PROD_ID0, PROD_ID1, PROD_ID2, PROD_ID3 -#endif /* MULT_OEM */ - -#define SADDRL (0) /* start address SKLOGO */ -#define SA_MAC (0x10) /* start addr. MAC_AD within the PROM */ -#define PRA_OFF (4) -#define SA_PMD_TYPE (8) /* start addr. PMD-Type */ - -#define SKFDDI_PSZ 32 /* address PROM size */ - -/* - * address transmission from logical to physical offset address on board - */ -#define FMA(a) (0x0400|((a)<<1)) /* FORMAC+ (r/w) */ -#define P1A(a) (0x0800|((a)<<1)) /* PLC1 (r/w) */ -#define P2A(a) (0x0840|((a)<<1)) /* PLC2 (r/w) */ -#define TIA(a) (0x0880|((a)<<1)) /* Timer (r/w) */ -#define PRA(a) (0x0c80| (a)) /* configuration PROM */ -#define C0A(a) (0x0c84| (a)) /* config. RAM */ -#define C1A(a) (0x0ca0| (a)) /* IRQ-, DMA-nr., EPROM type */ -#define C2A(a) (0x0ca4| (a)) /* EPROM and PAGE selector */ - -#define CONF C0A(0) /* config RAM (card enable bit port) */ -#define PGRA C2A(0) /* Flash page register */ -#define CDID PRA(0) /* Card ID I/O port addr. offset */ - - -/* - * physical address offset + slot specific IO-Port base address - */ -#define FM_A(a) (FMA(a)+smc->hw.iop) /* FORMAC Plus physical addr */ -#define P1_A(a) (P1A(a)+smc->hw.iop) /* PLC1 (r/w) */ -#define P2_A(a) (P2A(a)+smc->hw.iop) /* PLC2 (r/w) */ -#define TI_A(a) (TIA(a)+smc->hw.iop) /* Timer (r/w) */ -#define PR_A(a) (PRA(a)+smc->hw.iop) /* config. PROM */ -#define C0_A(a) (C0A(a)+smc->hw.iop) /* config. RAM */ -#define C1_A(a) (C1A(a)+smc->hw.iop) /* config. RAM */ -#define C2_A(a) (C2A(a)+smc->hw.iop) /* config. RAM */ - - -#define CSRA 0x0008 /* control/status register address (r/w) */ -#define ISRA 0x0008 /* int. source register address (upper 8Bits) */ -#define PLC1I 0x001a /* clear PLC1 interrupt (write only) */ -#define PLC2I 0x0020 /* clear PLC2 interrupt (write only) */ -#define CSFA 0x001c /* control/status FIFO BUSY flags (read only) */ -#define RQAA 0x001c /* Request reg. (write only) */ -#define WCTA 0x001e /* word counter (r/w) */ -#define FFLAG 0x005e /* FLAG/V_FULL (FIFO almost full, write only)*/ - -#define CSR_A (CSRA+smc->hw.iop) /* control/status register address (r/w) */ -#ifdef UNIX -#define CSR_AS(smc) (CSRA+(smc)->hw.iop) /* control/status register address (r/w) */ -#endif -#define ISR_A (ISRA+smc->hw.iop) /* int. source register address (upper 8Bits) */ -#define PLC1_I (PLC1I+smc->hw.iop) /* clear PLC1 internupt (write only) */ -#define PLC2_I (PLC2I+smc->hw.iop) /* clear PLC2 interrupt (write only) */ -#define CSF_A (CSFA+smc->hw.iop) /* control/status FIFO BUSY flags (r/w) */ -#define RQA_A (RQAA+smc->hw.iop) /* Request reg. (write only) */ -#define WCT_A (WCTA+smc->hw.iop) /* word counter (r/w) */ -#define FFLAG_A (FFLAG+smc->hw.iop) /* FLAG/V_FULL (FIFO almost full, write only)*/ - -/* - * control/status register CSRA bits - */ -/* write */ -#define CS_CRESET 0x01 /* Card reset (0=reset) */ -#define CS_RESET_FIFO 0x02 /* FIFO reset (0=reset) */ -#define CS_IMSK 0x04 /* enable IRQ (1=enable, 0=disable) */ -#define CS_EN_IRQ_TC 0x08 /* enable IRQ from transfer counter */ -#define CS_BYPASS 0x20 /* bypass switch (0=remove, 1=insert)*/ -#define CS_LED_0 0x40 /* switch LED 0 */ -#define CS_LED_1 0x80 /* switch LED 1 */ -/* read */ -#define CS_BYSTAT 0x40 /* 0=Bypass exist, 1= ..not */ -#define CS_SAS 0x80 /* single attachement station (=1) */ - -/* - * control/status register CSFA bits (FIFO) - */ -#define CSF_MUX0 0x01 -#define CSF_MUX1 0x02 -#define CSF_HSREQ0 0x04 -#define CSF_HSREQ1 0x08 -#define CSF_HSREQ2 0x10 -#define CSF_BUSY_DMA 0x40 -#define CSF_BUSY_FIFO 0x80 - -/* - * Interrupt source register ISRA (upper 8 data bits) read only & low activ. - */ -#define IS_MINTR1 0x0100 /* FORMAC ST1U/L & ~IMSK1U/L*/ -#define IS_MINTR2 0x0200 /* FORMAC ST2U/L & ~IMSK2U/L*/ -#define IS_PLINT1 0x0400 /* PLC1 */ -#define IS_PLINT2 0x0800 /* PLC2 */ -#define IS_TIMINT 0x1000 /* Timer 82C54-2 */ -#define IS_TC 0x2000 /* transf. counter */ - -#define ALL_IRSR (IS_MINTR1|IS_MINTR2|IS_PLINT1|IS_PLINT2|IS_TIMINT|IS_TC) - -/* - * CONFIG<0> RAM (C0_A()) - */ -#define CFG_CARD_EN 0x01 /* card enable */ - -/* - * CONFIG<1> RAM (C1_A()) - */ -#define CFG_IRQ_SEL 0x03 /* IRQ select (4 nr.) */ -#define CFG_IRQ_TT 0x04 /* IRQ trigger type (LEVEL/EDGE) */ -#define CFG_DRQ_SEL 0x18 /* DMA requ. (4 nr.) */ -#define CFG_BOOT_EN 0x20 /* 0=BOOT-, 1=Application Software */ -#define CFG_PROG_EN 0x40 /* V_Prog for FLASH_PROM (1=on) */ - -/* - * CONFIG<2> RAM (C2_A()) - */ -#define CFG_EPROM_SEL 0x0f /* FPROM start address selection */ -#define CFG_PAGE 0xf0 /* FPROM page selection */ - - -#define READ_PROM(a) ((u_char)inp(a)) -#define GET_PAGE(i) outp(C2_A(0),((int)(i)<<4) | (inp(C2_A(0)) & ~CFG_PAGE)) -#define FPROM_SW() (inp(C1_A(0)) & CFG_BOOT_EN) - -#define MAX_PAGES 16 /* 16 pages */ -#define MAX_FADDR 0x2000 /* 8K per page */ -#define VPP_ON() outp(C1_A(0),inp(C1_A(0)) | CFG_PROG_EN) -#define VPP_OFF() outp(C1_A(0),inp(C1_A(0)) & ~CFG_PROG_EN) - -#define DMA_BUSY() (inpw(CSF_A) & CSF_BUSY_DMA) -#define FIFO_BUSY() (inpw(CSF_A) & CSF_BUSY_FIFO) -#define DMA_FIFO_BUSY() (inpw(CSF_A) & (CSF_BUSY_DMA | CSF_BUSY_FIFO)) -#define BUS_CHECK() - -#ifdef UNISYS -/* For UNISYS use another macro with drv_usecewait function */ -#define CHECK_DMA() {u_long k = 1000000; \ - while (k && (DMA_BUSY())) { k--; drv_usecwait(20); } \ - if (!k) SMT_PANIC(smc,HWM_E0003,HWM_E0003_MSG) ; } -#else -#define CHECK_DMA() {u_long k = 1000000 ;\ - while (k && (DMA_BUSY())) k-- ;\ - if (!k) SMT_PANIC(smc,HWM_E0003,HWM_E0003_MSG) ; } -#endif - -#define CHECK_FIFO() {u_long k = 1000000 ;\ - while (k && (FIFO_BUSY())) k-- ;\ - if (!k) SMT_PANIC(smc,HWM_E0019,HWM_E0019_MSG) ; } - -#define CHECK_DMA_FIFO() {u_long k = 1000000 ;\ - while (k && (DMA_FIFO_BUSY())) k-- ;\ - if (!k) SMT_PANIC(smc,HWM_E0004,HWM_E0004_MSG) ; } - -#define GET_ISR() ~inpw(ISR_A) -#define CHECK_ISR() ~inpw(ISR_A) - -#ifndef UNIX -#ifndef WINNT -#define CLI_FBI() outpw(CSR_A,(inpw(CSR_A)&\ - (CS_CRESET|CS_BYPASS))|CS_RESET_FIFO|smc->hw.led) -#else /* WINNT */ -#define CLI_FBI() outpw(CSR_A,(l_inpw(CSR_A)&\ - (CS_CRESET|CS_BYPASS))|CS_RESET_FIFO|smc->hw.led) -#endif /* WINNT */ -#else /* UNIX */ -#define CLI_FBI(smc) outpw(CSR_AS(smc),(inpw(CSR_AS(smc))&\ - (CS_CRESET|CS_BYPASS))|CS_RESET_FIFO|(smc)->hw.led) -#endif - -#ifndef UNIX -#define STI_FBI() outpw(CSR_A,(inpw(CSR_A)&\ - (CS_CRESET|CS_BYPASS|CS_RESET_FIFO))|CS_IMSK|smc->hw.led) -#else -#define STI_FBI(smc) outpw(CSR_AS(smc),(inpw(CSR_AS(smc))&\ - (CS_CRESET|CS_BYPASS|CS_RESET_FIFO))|CS_IMSK|(smc)->hw.led) -#endif - -/* EISA DMA Controller */ -#define DMA_WRITE_SINGLE_MASK_BIT_M 0x0a /* Master DMA Controller */ -#define DMA_WRITE_SINGLE_MASK_BIT_S 0xd4 /* Slave DMA Controller */ -#define DMA_CLEAR_BYTE_POINTER_M 0x0c -#define DMA_CLEAR_BYTE_POINTER_S 0xd8 - -#endif /* EISA */ - -#ifdef MCA - -/* - * POS Register: !! all I/O's are 8-Bit !! - */ -#define POS_SYS_SETUP 0x94 /* system setup register */ -#define POS_SYSTEM 0xff /* system mode */ - -#define POS_CHANNEL_POS 0x96 /* register slot ID */ -#define POS_CHANNEL_BIT 0x08 /* mask for -"- */ - -#define POS_BASE 0x100 /* POS base address */ -#define POS_ID_LOW POS_BASE /* card ID low */ -#define POS_ID_HIGH (POS_BASE+1) /* card ID high */ -#define POS_102 (POS_BASE+2) /* card en., arbitration level .. */ -#define POS_103 (POS_BASE+3) /* FPROM addr, page */ -#define POS_104 (POS_BASE+4) /* I/O, IRQ */ -#define POS_105 (POS_BASE+5) /* POS_CHCK */ -#define POS_106 (POS_BASE+6) /* to read VPD */ -#define POS_107 (POS_BASE+7) /* added without function */ - -/* FM1 card IDs */ -#define FM1_CARD_ID0 0x83 -#define FM1_CARD_ID1 0 - -#define FM1_IBM_ID0 0x9c -#define FM1_IBM_ID1 0x8f - - -/* FM2 card IDs */ -#define FM2_CARD_ID0 0xab -#define FM2_CARD_ID1 0 - -#define FM2_IBM_ID0 0x7e -#define FM2_IBM_ID1 0x8f - -/* Board revision. */ -#define FM1_REV 0 -#define FM2_REV 1 - -#define MAX_SLOT 8 - -/* - * POS_102 - */ -#define POS_CARD_EN 0x01 /* card enable =1 */ -#define POS_SDAT_EN 0x02 /* enable 32-bit streaming data mode */ -#define POS_EN_CHKINT 0x04 /* enable int. from check line asserted */ -#define POS_EN_BUS_ERR 0x08 /* enable int. on invalid busmaster transf. */ -#define POS_FAIRNESS 0x10 /* fairnes on =1 */ -/* attention: arbitration level used with bit 0 POS 105 */ -#define POS_LARBIT 0xe0 /* arbitration level (0,0,0)->level = 0x8 - (1,1,1)->level = 0xf */ -/* - * POS_103 - */ -#define POS_PAGE 0x07 /* FPROM page selection */ -#define POS_BOOT_EN 0x08 /* boot PROM enable =1 */ -#define POS_MSEL 0x70 /* memory start address for FPROM mapping */ -#define PROG_EN 0x80 /* FM1: Vpp prog on/off */ -#define POS_SDR 0x80 /* FM2: Streaming data bit */ - -/* - * POS_104 - */ -#define POS_IOSEL 0x3f /* selected I/O base address */ -#define POS_IRQSEL 0xc0 /* selected interrupt */ - -/* - * POS_105 - */ -#define POS_CHCK 0x80 -#define POS_SYNC_ERR 0x20 /* FM2: synchronous error reporting */ -#define POS_PAR_DATA 0x10 /* FM2: data parity enable bit */ -#define POS_PAR_ADDR 0x08 /* FM2: address parity enable bit */ -#define POS_IRQHSEL 0x02 /* FM2: Highest bit for IRQ_selection */ -#define POS_HARBIT 0x01 /* Highest bit in Bus arbitration selection */ - -#define SA_MAC (0) /* start addr. MAC_AD within the PROM */ -#define PRA_OFF (0) -#define SA_PMD_TYPE (8) /* start addr. PMD-Type */ - -/* - * address transmission from logical to physical offset address on board - */ -#define FMA(a) (0x0100|((a)<<1)) /* FORMAC+ (r/w) */ -#define P2(a) (0x00c0|((a)<<1)) /* PLC2 (r/w) (DAS) */ -#define P1(a) (0x0080|((a)<<1)) /* PLC1 (r/w) */ -#define TI(a) (0x0060|((a)<<1)) /* Timer (r/w) */ -#define PR(a) (0x0040|((a)<<1)) /* configuration PROM */ -#define CS(a) (0x0020| (a)) /* control/status */ -#define FF(a) (0x0010|((a)<<1)) /* FIFO ASIC */ -#define CT(a) (0x0000|((a)<<1)) /* counter */ - -/* - * counter - */ -#define ACLA CT(0) /* address counter low */ -#define ACHA CT(1) /* address counter high */ -#define BCN CT(2) /* byte counter */ -#define MUX CT(3) /* MUX-register */ -#define WCN CT(0x08) /* word counter */ -#define FFLG CT(0x09) /* FIFO Flags */ - -/* - * test/control register (FM2 only) - */ -#define CNT_TST 0x018 /* Counter test control register */ -#define CNT_STP 0x01a /* Counter test step reg. (8 Bit) */ - -/* - * CS register (read only) - */ -#define CSRA CS(0) /* control/status register address */ -#define CSFA CS(2) /* control/status FIFO BUSY ... */ -#define ISRA CS(4) /* first int. source register address */ -#define ISR2 CS(6) /* second int. source register address */ -#define LEDR CS(0x0c) /* LED register r/w */ -#define CSIL CS(0x10) /* I/O mapped POS_ID_low (100) */ -#define CSIH CS(0x12) /* - " - POS_ID_HIGH (101) */ -#define CSA CS(0x14) /* - " - POS_102 */ -#define CSM CS(0x0e) /* - " - POS_103 */ -#define CSM_FM1 CS(0x16) /* - " - POS_103 (copy in FM1) */ -#define CSI CS(0x18) /* - " - POS_104 */ -#define CSS CS(0x1a) /* - " - POS_105 */ -#define CSP_06 CS(0x1c) /* - " - POS_106 */ -#define WDOG_ST 0x1c /* Watchdog status (FM2 only) */ -#define WDOG_EN 0x1c /* Watchdog enabling (FM2 only, 8Bit) */ -#define WDOG_DIS 0x1e /* Watchdog disabling (FM2 only, 8Bit) */ - -#define PGRA CSM /* Flash page register */ - - -#define WCTA FF(0) /* word counter */ -#define FFLAG FF(1) /* FLAG/V_FULL (FIFO almost full, write only)*/ - -/* - * Timer register (FM2 only) - */ -#define RTM_CNT 0x28 /* RTM Counter */ -#define TI_DIV 0x60 /* Timer Prescaler */ -#define TI_CH1 0x62 /* Timer channel 1 counter */ -#define TI_STOP 0x64 /* Stop timer on channel 1 */ -#define TI_STRT 0x66 /* Start timer on channel 1 */ -#define TI_INI2 0x68 /* Timer: Bus master preemption */ -#define TI_CNT2 0x6a /* Timer */ -#define TI_INI3 0x6c /* Timer: Streaming data */ -#define TI_CNT3 0x6e /* Timer */ -#define WDOG_LO 0x70 /* Watchdog counter low */ -#define WDOG_HI 0x72 /* Watchdog counter high */ -#define RTM_PRE 0x74 /* restr. token prescaler */ -#define RTM_TIM 0x76 /* restr. token timer */ - -/* - * Recommended Timeout values (for FM2 timer only) - */ -#define TOUT_BM_PRE 188 /* 3.76 usec */ -#define TOUT_S_DAT 374 /* 7.48 usec */ - -/* - * CS register (write only) - */ -#define HSR(p) CS(0x18|(p)) /* Host request register */ - -#define RTM_PUT 0x36 /* restr. token counter write */ -#define RTM_GET 0x28 /* - " - clear */ -#define RTM_CLEAR 0x34 /* - " - read */ - -/* - * BCN Bit definitions - */ -#define BCN_BUSY 0x8000 /* DMA Busy flag */ -#define BCN_AZERO 0x4000 /* Almost zero flag (BCN < 4) */ -#define BCN_STREAM 0x2000 /* Allow streaming data (BCN >= 8) */ - -/* - * WCN Bit definitions - */ -#define WCN_ZERO 0x2000 /* Zero flag (counted to zero) */ -#define WCN_AZERO 0x1000 /* Almost zero flag (BCN < 4) */ - -/* - * CNT_TST Bit definitions - */ -#define CNT_MODE 0x01 /* Go into test mode */ -#define CNT_D32 0x02 /* 16/32 BIT test mode */ - -/* - * FIFO Flag FIFO Flags/Vfull register - */ -#define FF_VFULL 0x003f /* V_full value mask */ -#define FFLG_FULL 0x2000 /* FULL flag */ -#define FFLG_A_FULL 0x1000 /* Almost full flag */ -#define FFLG_VFULL 0x0800 /* V_full Flag */ -#define FFLG_A_EMP 0x0400 /* almost empty flag */ -#define FFLG_EMP 0x0200 /* empty flag */ -#define FFLG_T_EMP 0x0100 /* totally empty flag */ - -/* - * WDOG Watchdog status register - */ -#define WDOG_ALM 0x01 /* Watchdog alarm Bit */ -#define WDOG_ACT 0x02 /* Watchdog active Bit */ - -/* - * CS(0) CONTROLS - */ -#define CS_CRESET 0x0001 -#define FIFO_RST 0x0002 -#define CS_IMSK 0x0004 -#define EN_IRQ_CHCK 0x0008 -#define EN_IRQ_TOKEN 0x0010 -#define EN_IRQ_TC 0x0020 -#define TOKEN_STATUS 0x0040 -#define RTM_CHANGE 0x0080 - -#define CS_SAS 0x0100 -#define CS_BYSTAT 0x0200 /* bypass connected (0=conn.) */ -#define CS_BYPASS 0x0400 /* bypass on/off indication */ - -/* - * CS(2) FIFOSTAT - */ -#define HSREQ 0x0007 -#define BIGDIR 0x0008 -#define CSF_BUSY_FIFO 0x0010 -#define CSF_BUSY_DMA 0x0020 -#define SLOT_32 0x0040 - -#define LED_0 0x0001 -#define LED_1 0x0002 -#define LED_2 0x0100 - -#define MAX_PAGES 8 /* pages */ -#define MAX_FADDR 0x4000 /* 16K per page */ - -/* - * IRQ = ISRA || ISR2 ; - * - * ISRA = IRQ_OTH_EN && (IS_LAN | IS_BUS) ; - * ISR2 = IRQ_TC_EN && IS_TC ; - * - * IS_LAN = (IS_MINTR1 | IS_MINTR2 | IS_PLINT1 | IS_PLINT2 | IS_TIMINT) || - * (IRQ_EN_TOKEN && IS_TOKEN) ; - * IS_BUS = IRQ_CHCK_EN && (IS_BUSERR | IS_CHCK_L) ; - */ -/* - * ISRA !!! activ high !!! - */ -#define IS_MINTR1 0x0001 /* FORMAC ST1U/L & ~IMSK1U/L*/ -#define IS_MINTR2 0x0002 /* FORMAC ST2U/L & ~IMSK2U/L*/ -#define IS_PLINT1 0x0004 /* PLC1 */ -#define IS_PLINT2 0x0008 /* PLC2 */ -#define IS_TIMINT 0x0010 /* Timer 82C54-2 */ -#define IS_TOKEN 0x0020 /* restrictet token monitoring */ -#define IS_CHCK_L 0x0040 /* check line asserted */ -#define IS_BUSERR 0x0080 /* bus error */ -/* - * ISR2 - */ -#define IS_TC 0x0001 /* terminal count irq */ -#define IS_SFDBKRTN 0x0002 /* selected feedback return */ -#define IS_D16 0x0004 /* DS16 */ -#define IS_D32 0x0008 /* DS32 */ -#define IS_DPEI 0x0010 /* Data Parity Indication */ - -#define ALL_IRSR 0x00ff - -#define FM_A(a) ADDR(FMA(a)) /* FORMAC Plus physical addr */ -#define P1_A(a) ADDR(P1(a)) /* PLC1 (r/w) */ -#define P2_A(a) ADDR(P2(a)) /* PLC2 (r/w) (DAS) */ -#define TI_A(a) ADDR(TI(a)) /* Timer (r/w) FM1 only! */ -#define PR_A(a) ADDR(PR(a)) /* config. PROM */ -#define CS_A(a) ADDR(CS(a)) /* control/status */ - -#define ISR1_A ADDR(ISRA) /* first int. source register address */ -#define ISR2_A ADDR(ISR2) /* second -"- */ -#define CSR_A ADDR(CSRA) /* control/status register address */ -#define CSF_A ADDR(CSFA) /* control/status FIFO BUSY flags (r/w) */ - -#define CSIL_A ADDR(CSIL) /* I/O mapped POS_ID_low (102) */ -#define CSIH_A ADDR(CSIH) /* - " - POS_ID_HIGH (101) */ -#define CSA_A ADDR(CSA) /* - " - POS_102 */ -#define CSI_A ADDR(CSI) /* - " - POS_104 */ -#define CSM_A ADDR(CSM) /* - " - POS_103 */ -#define CSM_FM1_A ADDR(CSM_FM1) /* - " - POS_103 (2nd copy, FM1) */ -#define CSP_06_A ADDR(CSP_06) /* - " - POS_106 */ - -#define WCT_A ADDR(WCTA) /* word counter (r/w) */ -#define FFLAG_A ADDR(FFLAG) /* FLAG/V_FULL (FIFO almost full, write only)*/ - -#define ACL_A ADDR(ACLA) /* address counter low */ -#define ACH_A ADDR(ACHA) /* address counter high */ -#define BCN_A ADDR(BCN) /* byte counter */ -#define MUX_A ADDR(MUX) /* MUX-register */ - -#define ISR_A ADDR(ISRA) /* Interrupt Source Register */ -#define FIFO_RESET_A ADDR(FIFO_RESET) /* reset the FIFO */ -#define FIFO_EN_A ADDR(FIFO_EN) /* enable the FIFO */ - -#define WDOG_EN_A ADDR(WDOG_EN) /* reset and start the WDOG */ -#define WDOG_DIS_A ADDR(WDOG_DIS) /* disable the WDOG */ -/* - * all control reg. (read!) are 8 bit (except PAGE_RG_A and LEDR_A) - */ -#define HSR_A(p) ADDR(HSR(p)) /* Host request register */ - -#define STAT_BYP 0 /* bypass station */ -#define STAT_INS 2 /* insert station */ -#define BYPASS(o) CS(0x10|(o)) /* o=STAT_BYP || STAT_INS */ - -#define IRQ_TC_EN CS(0x0b) /* enable/disable IRQ on TC */ -#define IRQ_TC_DIS CS(0x0a) -#define IRQ_TOKEN_EN CS(9) /* enable/disable IRQ on restr. Token */ -#define IRQ_TOKEN_DIS CS(8) -#define IRQ_CHCK_EN CS(7) /* -"- IRQ after CHCK line */ -#define IRQ_CHCK_DIS CS(6) -#define IRQ_OTH_EN CS(5) /* -"- other IRQ's */ -#define IRQ_OTH_DIS CS(4) -#define FIFO_EN CS(3) /* disable (reset), enable FIFO */ -#define FIFO_RESET CS(2) -#define CARD_EN CS(1) /* disable (reset), enable card */ -#define CARD_DIS CS(0) - -#define LEDR_A ADDR(LEDR) /* D0=green, D1=yellow, D8=L2 */ -#define PAGE_RG_A ADDR(CSM) /* D<2..0> */ -#define IRQ_CHCK_EN_A ADDR(IRQ_CHCK_EN) -#define IRQ_CHCK_DIS_A ADDR(IRQ_CHCK_DIS) - -#define GET_PAGE(bank) outpw(PAGE_RG_A,(inpw(PAGE_RG_A) &\ - (~POS_PAGE)) |(int) (bank)) -#define VPP_ON() if (smc->hw.rev == FM1_REV) { \ - outpw(PAGE_RG_A, \ - (inpw(PAGE_RG_A) & POS_PAGE) | PROG_EN); \ - } -#define VPP_OFF() if (smc->hw.rev == FM1_REV) { \ - outpw(PAGE_RG_A,(inpw(PAGE_RG_A) & POS_PAGE)); \ - } - -#define SKFDDI_PSZ 16 /* address PROM size */ - -#define READ_PROM(a) ((u_char)inp(a)) - -#define GET_ISR() ~inpw(ISR1_A) -#ifndef TCI -#define CHECK_ISR() ~inpw(ISR1_A) -#define CHECK_ISR_SMP(iop) ~inpw((iop)+ISRA) -#else -#define CHECK_ISR() (~inpw(ISR1_A) | ~inpw(ISR2_A)) -#define CHECK_ISR_SMP(iop) (~inpw((iop)+ISRA) | ~inpw((iop)+ISR2)) -#endif - -#define DMA_BUSY() (inpw(CSF_A) & CSF_BUSY_DMA) -#define FIFO_BUSY() (inpw(CSF_A) & CSF_BUSY_FIFO) -#define DMA_FIFO_BUSY() (inpw(CSF_A) & (CSF_BUSY_DMA | CSF_BUSY_FIFO)) -#define BUS_CHECK() { int i ; \ - if ((i = GET_ISR()) & IS_BUSERR) \ - SMT_PANIC(smc,HWM_E0020,HWM_E0020_MSG) ; \ - if (i & IS_CHCK_L) \ - SMT_PANIC(smc,HWM_E0014,HWM_E0014_MSG) ; \ - } - -#define CHECK_DMA() { u_long k = 10000 ; \ - while (k && (DMA_BUSY())) { \ - k-- ; \ - BUS_CHECK() ; \ - } \ - if (!k) SMT_PANIC(smc,HWM_E0003,HWM_E0003_MSG) ; } - -#define CHECK_FIFO() {u_long k = 1000000 ;\ - while (k && (FIFO_BUSY())) k-- ;\ - if (!k) SMT_PANIC(smc,HWM_E0019,HWM_E0019_MSG) ; } - -#define CHECK_DMA_FIFO() {u_long k = 1000000 ;\ - while (k && (DMA_FIFO_BUSY())) { \ - k-- ;\ - BUS_CHECK() ; \ - } \ - if (!k) SMT_PANIC(smc,HWM_E0004,HWM_E0004_MSG) ; } - -#ifndef UNIX -#define CLI_FBI() outp(ADDR(IRQ_OTH_DIS),0) -#else -#define CLI_FBI(smc) outp(ADDRS((smc),IRQ_OTH_DIS),0) -#endif - -#ifndef TCI -#define CLI_FBI_SMP(iop) outp((iop)+IRQ_OTH_DIS,0) -#else -#define CLI_FBI_SMP(iop) outp((iop)+IRQ_OTH_DIS,0) ;\ - outp((iop)+IRQ_TC_DIS,0) -#endif - -#ifndef UNIX -#define STI_FBI() outp(ADDR(IRQ_OTH_EN),0) -#else -#define STI_FBI(smc) outp(ADDRS((smc),IRQ_OTH_EN),0) -#endif - -/* - * Terminal count primitives - */ -#define CLI_TCI(smc) outp(ADDRS((smc),IRQ_TC_DIS),0) -#define STI_TCI(smc) outp(ADDRS((smc),IRQ_TC_EN),0) -#define CHECK_TC(smc,k) {(k) = 10000 ;\ - while ((k) && (~inpw(ISR2_A) & IS_TC)) (k)-- ;\ - if (!k) SMT_PANIC(smc,HWM_E0018,HWM_E0018_MSG) ; } - -#endif /* MCA */ - -#ifdef ISA - -/* - * address transmission from logic NPADDR6-0 to physical offset address on board - */ -#define FMA(a) (0x8000|(((a)&0x07)<<1)|(((a)&0x78)<<7)) /* FORMAC+ (r/w) */ -#define PRA(a) (0x1000|(((a)&0x07)<<1)|(((a)&0x18)<<7)) /* PROM (read only)*/ -#define P1A(a) (0x4000|(((a)&0x07)<<1)|(((a)&0x18)<<7)) /* PLC1 (r/w) */ -#define P2A(a) (0x5000|(((a)&0x07)<<1)|(((a)&0x18)<<7)) /* PLC2 (r/w) */ -#define TIA(a) (0x6000|(((a)&0x03)<<1)) /* Timer (r/w) */ - -#define ISRA 0x0000 /* int. source register address (read only) */ -#define ACLA 0x0000 /* address counter low address (write only) */ -#define ACHA 0x0002 /* address counter high address (write only) */ -#define TRCA 0x0004 /* transfer counter address (write only) */ -#define PGRA 0x0006 /* page register address (write only) */ -#define RQAA 0x2000 /* Request reg. (write only) */ -#define CSRA 0x3000 /* control/status register address (r/w) */ - -/* - * physical address offset + IO-Port base address - */ -#define FM_A(a) (FMA(a)+smc->hw.iop) /* FORMAC Plus physical addr */ -#define PR_A(a) (PRA(a)+smc->hw.iop) /* PROM (read only)*/ -#define P1_A(a) (P1A(a)+smc->hw.iop) /* PLC1 (r/w) */ -#define P2_A(a) (P2A(a)+smc->hw.iop) /* PLC2 (r/w) */ -#define TI_A(a) (TIA(a)+smc->hw.iop) /* Timer (r/w) */ - -#define ISR_A (0x0000+smc->hw.iop) /* int. source register address (read only) */ -#define ACL_A (0x0000+smc->hw.iop) /* address counter low address (write only) */ -#define ACH_A (0x0002+smc->hw.iop) /* address counter high address (write only)*/ -#define TRC_A (0x0004+smc->hw.iop) /* transfer counter address (write only) */ -#define PGR_A (0x0006+smc->hw.iop) /* page register address (write only) */ -#define RQA_A (0x2000+smc->hw.iop) /* Request reg. (write only) */ -#define CSR_A (0x3000+smc->hw.iop) /* control/status register address (r/w) */ -#ifdef UNIX -#define CSR_AS(smc) (0x3000+(smc)->hw.iop) /* control/status register address */ -#endif -#define PLC1_I (0x3400+smc->hw.iop) /* clear PLC1 interrupt bit */ -#define PLC2_I (0x3800+smc->hw.iop) /* clear PLC2 interrupt bit */ - -#ifndef MULT_OEM -#ifndef OEM_CONCEPT -#define SKLOGO_STR "SKFDDI" -#else /* OEM_CONCEPT */ -#define SKLOGO_STR OEM_FDDI_LOGO -#endif /* OEM_CONCEPT */ -#endif /* MULT_OEM */ -#define SADDRL (24) /* start address SKLOGO */ -#define SA_MAC (0) /* start addr. MAC_AD within the PROM */ -#define PRA_OFF (0) -#define SA_PMD_TYPE (8) /* start addr. PMD-Type */ - -#define CDID (PRA(SADDRL)) /* Card ID int/O port addr. offset */ -#define NEXT_CDID ((PRA(SADDRL+1)) - CDID) - -#define SKFDDI_PSZ 32 /* address PROM size */ - -#define READ_PROM(a) ((u_char)inpw(a)) -#define GET_PAGE(i) outpw(PGR_A,(int)(i)) - -#define MAX_PAGES 16 /* 16 pages */ -#define MAX_FADDR 0x2000 /* 8K per page */ -#define VPP_OFF() outpw(CSR_A,(inpw(CSR_A) & (CS_CRESET|CS_BYPASS))) -#define VPP_ON() outpw(CSR_A,(inpw(CSR_A) & (CS_CRESET|CS_BYPASS)) | \ - CS_VPPSW) - -/* - * control/status register CSRA bits (log. addr: 0x3000) - */ -/* write */ -#define CS_CRESET 0x01 /* Card reset (0=reset) */ -#define CS_IMSK 0x02 /* enable IRQ (1=enable, 0=disable) */ -#define CS_RESINT1 0x04 /* PLINT1 reset */ -#define CS_VPPSW 0x10 /* 12V power switch (0=off, 1=on) */ -#define CS_BYPASS 0x20 /* bypass switch (0=remove, 1=insert)*/ -#define CS_RESINT2 0x40 /* PLINT2 reset */ -/* read */ -#define CS_BUSY 0x04 /* master transfer activ (=1) */ -#define CS_SW_EPROM 0x08 /* 0=Application Soft. 1=BOOT-EPROM */ -#define CS_BYSTAT 0x40 /* 0=Bypass exist, 1= ..not */ -#define CS_SAS 0x80 /* single attachement station (=1) */ - -/* - * Interrupt source register ISRA (log. addr: 0x0000) read only & low activ. - */ -#define IS_MINTR1 0x01 /* FORMAC ST1U/L && ~IMSK1U/L*/ -#define IS_MINTR2 0x02 /* FORMAC ST2U/L && ~IMSK2U/L*/ -#define IS_PLINT1 0x04 /* PLC1 */ -#define IS_PLINT2 0x08 /* PLC2 */ -#define IS_TIMINT 0x10 /* Timer 82C54-2 */ - -#define ALL_IRSR (IS_MINTR1|IS_MINTR2|IS_PLINT1|IS_PLINT2|IS_TIMINT) - -#define FPROM_SW() (inpw(CSR_A)&CS_SW_EPROM) -#define DMA_BUSY() (inpw(CSR_A)&CS_BUSY) -#define CHECK_FIFO() -#define BUS_CHECK() - -/* - * set Host Request register (wr.) - */ -#define SET_HRQ(qup) outpw(RQA_A+((qup)<<1),0) - -#ifndef UNIX -#ifndef WINNT -#define CLI_FBI() outpw(CSR_A,(inpw(CSR_A)&(CS_CRESET|CS_BYPASS|CS_VPPSW))) -#else -#define CLI_FBI() outpw(CSR_A,(l_inpw(CSR_A) & \ - (CS_CRESET|CS_BYPASS|CS_VPPSW))) -#endif -#else -#define CLI_FBI(smc) outpw(CSR_AS(smc),(inpw(CSR_AS(smc))& \ - (CS_CRESET|CS_BYPASS|CS_VPPSW))) -#endif - -#ifndef UNIX -#define STI_FBI() outpw(CSR_A,(inpw(CSR_A) & \ - (CS_CRESET|CS_BYPASS|CS_VPPSW)) | CS_IMSK) -#else -#define STI_FBI(smc) outpw(CSR_AS(smc),(inpw(CSR_AS(smc)) & \ - (CS_CRESET|CS_BYPASS|CS_VPPSW)) | CS_IMSK) -#endif - -#define CHECK_DMA() {unsigned k = 10000 ;\ - while (k && (DMA_BUSY())) k-- ;\ - if (!k) SMT_PANIC(smc,HWM_E0003,HWM_E0003_MSG) ; } - -#define GET_ISR() ~inpw(ISR_A) - -#endif /* ISA */ - /*--------------------------------------------------------------------------*/ #ifdef PCI diff --git a/drivers/net/skfp/h/skfbiinc.h b/drivers/net/skfp/h/skfbiinc.h index 79d55ad2cd2a..ac2d7192f1ca 100644 --- a/drivers/net/skfp/h/skfbiinc.h +++ b/drivers/net/skfp/h/skfbiinc.h @@ -22,32 +22,6 @@ */ #define ERR_FLAGS (FS_MSRABT | FS_SEAC2 | FS_SFRMERR | FS_SFRMTY1) -#ifdef ISA -#define DMA_BUSY_CHECK CSRA -#define IMASK_FAST (IS_PLINT1 | IS_PLINT2 | IS_TIMINT) -#define HRQR (RQAA+(RQ_RRQ<<1)) -#define HRQW (RQAA+(RQ_WA2<<1)) -#define HRQA0 (RQAA+(RQ_WA0<<1)) -#define HRQSQ (RQAA+(RQ_WSQ<<1)) -#endif - -#ifdef EISA -#define DMA_BUSY_CHECK CSRA -#define DMA_HIGH_WORD 0x0400 -#define DMA_MASK_M 0x0a -#define DMA_MODE_M 0x0b -#define DMA_BYTE_PTR_M 0x0c -#define DMA_MASK_S 0x0d4 -#define DMA_MODE_S 0x0d6 -#define DMA_BYTE_PTR_S 0x0d8 -#define IMASK_FAST (IS_PLINT1 | IS_PLINT2 | IS_TIMINT | IS_TC) -#endif /* EISA */ - -#ifdef MCA -#define IMASK_FAST (IS_PLINT1 | IS_PLINT2 | IS_TIMINT | IS_TOKEN | \ - IS_CHCK_L | IS_BUSERR) -#endif - #ifdef PCI #define IMASK_FAST (IS_PLINT1 | IS_PLINT2 | IS_TIMINT | IS_TOKEN | \ IS_MINTR2 | IS_MINTR3 | IS_R1_P | \ diff --git a/drivers/net/skfp/h/targethw.h b/drivers/net/skfp/h/targethw.h index 22c4923241d3..626dc7263591 100644 --- a/drivers/net/skfp/h/targethw.h +++ b/drivers/net/skfp/h/targethw.h @@ -53,11 +53,6 @@ struct s_oem_ids { u_char oi_sub_id[4] ; /* sub id bytes, representation as */ /* defined by hardware, */ #endif -#ifdef ISA - u_char oi_logo_len ; /* the length of the adapter logo */ - u_char oi_logo[6] ; /* the adapter logo */ - u_char oi_reserved1 ; -#endif /* ISA */ } ; #endif /* MULT_OEM */ @@ -70,43 +65,17 @@ struct s_smt_hw { short dma ; /* DMA channel */ short irq ; /* IRQ level */ short eprom ; /* FLASH prom */ -#ifndef PCI - short DmaWriteExtraBytes ; /* add bytes for DMA write */ -#endif #ifndef SYNC u_short n_a_send ; /* pending send requests */ #endif -#if (defined(EISA) || defined(MCA) || defined(PCI)) +#if defined(PCI) short slot ; /* slot number */ short max_slots ; /* maximum number of slots */ -#endif - -#if (defined(PCI) || defined(MCA)) short wdog_used ; /* TRUE if the watch dog is used */ #endif -#ifdef MCA - short slot_32 ; /* 32bit slot (1) or 16bit slot (0) */ - short rev ; /* Board revision (FMx_REV). */ - short VFullRead ; /* V_full value for DMA read */ - short VFullWrite ; /* V_full value for DMA write */ -#endif - -#ifdef EISA - short led ; /* LED for FE card */ - - short dma_rmode ; /* read mode */ - short dma_wmode ; /* write mode */ - short dma_emode ; /* extend mode */ - - /* DMA controller channel dependent io addresses */ - u_short dma_base_word_count ; - u_short dma_base_address ; - u_short dma_base_address_page ; -#endif - #ifdef PCI u_short pci_handle ; /* handle to access the BIOS func */ u_long is_imask ; /* int maske for the int source reg */ diff --git a/drivers/net/skfp/hwt.c b/drivers/net/skfp/hwt.c index e01f8a0f35c6..053151468f93 100644 --- a/drivers/net/skfp/hwt.c +++ b/drivers/net/skfp/hwt.c @@ -77,25 +77,10 @@ void hwt_start(struct s_smc *smc, u_long time) */ if (!cnt) cnt++ ; -#ifndef PCI - /* - * 6.25MHz -> CLK0 : T0 (cnt0 = 16us) -> OUT0 - * OUT0 -> CLK1 : T1 (cnt1) OUT1 -> ISRA(IS_TIMINT) - */ - OUT_82c54_TIMER(3,1<<6 | 3<<4 | 0<<1) ; /* counter 1, mode 0 */ - OUT_82c54_TIMER(1,cnt & 0xff) ; /* LSB */ - OUT_82c54_TIMER(1,(cnt>>8) & 0xff) ; /* MSB */ - /* - * start timer by switching counter 0 to mode 3 - * T0 resolution 16 us (CLK0=0.16us) - */ - OUT_82c54_TIMER(3,0<<6 | 3<<4 | 3<<1) ; /* counter 0, mode 3 */ - OUT_82c54_TIMER(0,100) ; /* LSB */ - OUT_82c54_TIMER(0,0) ; /* MSB */ -#else /* PCI */ + outpd(ADDR(B2_TI_INI), (u_long) cnt * 200) ; /* Load timer value. */ outpw(ADDR(B2_TI_CRTL), TIM_START) ; /* Start timer. */ -#endif /* PCI */ + smc->hw.timer_activ = TRUE ; } @@ -115,15 +100,8 @@ void hwt_start(struct s_smc *smc, u_long time) ************************/ void hwt_stop(struct s_smc *smc) { -#ifndef PCI - /* stop counter 0 by switching to mode 0 */ - OUT_82c54_TIMER(3,0<<6 | 3<<4 | 0<<1) ; /* counter 0, mode 0 */ - OUT_82c54_TIMER(0,0) ; /* LSB */ - OUT_82c54_TIMER(0,0) ; /* MSB */ -#else /* PCI */ outpw(ADDR(B2_TI_CRTL), TIM_STOP) ; outpw(ADDR(B2_TI_CRTL), TIM_CL_IRQ) ; -#endif /* PCI */ smc->hw.timer_activ = FALSE ; } @@ -168,11 +146,6 @@ void hwt_init(struct s_smc *smc) void hwt_restart(struct s_smc *smc) { hwt_stop(smc) ; -#ifndef PCI - OUT_82c54_TIMER(3,1<<6 | 3<<4 | 0<<1) ; /* counter 1, mode 0 */ - OUT_82c54_TIMER(1,1 ) ; /* LSB */ - OUT_82c54_TIMER(1,0 ) ; /* MSB */ -#endif } /************************ @@ -191,21 +164,12 @@ void hwt_restart(struct s_smc *smc) u_long hwt_read(struct s_smc *smc) { u_short tr ; -#ifndef PCI - u_short is ; -#else u_long is ; -#endif if (smc->hw.timer_activ) { hwt_stop(smc) ; -#ifndef PCI - OUT_82c54_TIMER(3,1<<6) ; /* latch command */ - tr = IN_82c54_TIMER(1) & 0xff ; - tr += (IN_82c54_TIMER(1) & 0xff)<<8 ; -#else /* PCI */ tr = (u_short)((inpd(ADDR(B2_TI_VAL))/200) & 0xffff) ; -#endif /* PCI */ + is = GET_ISR() ; /* Check if timer expired (or wraparound). */ if ((tr > smc->hw.t_start) || (is & IS_TIMINT)) {