From: Huang Shijie Date: Sat, 3 Aug 2013 14:09:15 +0000 (-0400) Subject: serial: mxs: remove the MXS_AUART_DMA_CONFIG X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=afab220396bf9a728098996d73775fd1aaa712f8;p=linux-beck.git serial: mxs: remove the MXS_AUART_DMA_CONFIG The MXS_AUART_DMA_CONFIG is originally used to check if the DT node is configured with the DMA property. But now, the MXS_AUART_DMA_CONFIG is set unconditionally in the serial_mxs_probe_dt(), so the check in the mxs_auart_settermios() is not necessary anymore. This patch removes this macro. Signed-off-by: Huang Shijie Acked-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index eac7b585bc0c..10e9d70b5c40 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -133,7 +133,6 @@ enum mxs_auart_type { struct mxs_auart_port { struct uart_port port; -#define MXS_AUART_DMA_CONFIG 0x1 #define MXS_AUART_DMA_ENABLED 0x2 #define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */ #define MXS_AUART_DMA_RX_READY 3 /* bit 3 */ @@ -640,7 +639,7 @@ static void mxs_auart_settermios(struct uart_port *u, * we can only implement the DMA support for auart * in mx28. */ - if (is_imx28_auart(s) && (s->flags & MXS_AUART_DMA_CONFIG) + if (is_imx28_auart(s) && test_bit(MXS_AUART_RTSCTS, &s->flags)) { if (!mxs_auart_dma_init(s)) /* enable DMA tranfer */ @@ -1009,8 +1008,6 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s, } s->port.line = ret; - s->flags |= MXS_AUART_DMA_CONFIG; - if (of_get_property(np, "fsl,uart-has-rtscts", NULL)) set_bit(MXS_AUART_RTSCTS, &s->flags);