From: R Sricharan Date: Thu, 10 May 2012 08:47:22 +0000 (+0530) Subject: ARM: OMAP: counter-32k: Select the CR register offset using the IP scheme X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b009366f285d03e69aeea5f8cc466782dd6f0004;p=linux-beck.git ARM: OMAP: counter-32k: Select the CR register offset using the IP scheme OMAP socs has a legacy and a highlander version of the 32k sync counter IP. The register offsets vary between the highlander and the legacy scheme. So use the 'SCHEME' bits(30-31) of the revision register to distinguish between the two versions and choose the CR register offset accordingly. Signed-off-by: R Sricharan Signed-off-by: Santosh Shilimkar --- diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 2132c4f389e1..dbf1e03029a5 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -29,7 +29,10 @@ #include /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ -#define OMAP2_32KSYNCNT_CR_OFF 0x10 +#define OMAP2_32KSYNCNT_REV_OFF 0x0 +#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) +#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 +#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 /* * 32KHz clocksource ... always available, on pretty most chips except @@ -84,9 +87,16 @@ int __init omap_init_clocksource_32k(void __iomem *vbase) int ret; /* - * 32k sync Counter register offset is at 0x10 + * 32k sync Counter IP register offsets vary between the + * highlander version and the legacy ones. + * The 'SCHEME' bits(30-31) of the revision register is used + * to identify the version. */ - sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF; + if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) & + OMAP2_32KSYNCNT_REV_SCHEME) + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH; + else + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW; /* * 120000 rough estimate from the calculations in