From: Stephen Warren Date: Fri, 9 Aug 2013 14:49:25 +0000 (+0200) Subject: PCI: tegra: set up PADS_REFCLK_CFG1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b02b07adb159166f57d5e66e67ab1ae9de254229;p=linux-beck.git PCI: tegra: set up PADS_REFCLK_CFG1 The registers PADS_REFCLK_CFG are an array of 16-bit data, one entry per PCIe root port. For Tegra30, we therefore need to write a 3rd entry in this array. Doing so makes the mini-PCIe slot on Beaver operate correctly. While we're at it, add some #defines to partially document the fields within these 16-bit values. Signed-off-by: Stephen Warren Signed-off-by: Thierry Reding Acked-by: Bjorn Helgaas Signed-off-by: Stephen Warren --- diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c index 75607c788ff6..ad95c406a6d0 100644 --- a/drivers/pci/host/pci-tegra.c +++ b/drivers/pci/host/pci-tegra.c @@ -195,6 +195,25 @@ #define PADS_REFCLK_CFG0 0x000000C8 #define PADS_REFCLK_CFG1 0x000000CC +/* + * Fields in PADS_REFCLK_CFG*. Those registers form an array of 16-bit + * entries, one entry per PCIe port. These field definitions and desired + * values aren't in the TRM, but do come from NVIDIA. + */ +#define PADS_REFCLK_CFG_TERM_SHIFT 2 /* 6:2 */ +#define PADS_REFCLK_CFG_E_TERM_SHIFT 7 +#define PADS_REFCLK_CFG_PREDI_SHIFT 8 /* 11:8 */ +#define PADS_REFCLK_CFG_DRVI_SHIFT 12 /* 15:12 */ + +/* Default value provided by HW engineering is 0xfa5c */ +#define PADS_REFCLK_CFG_VALUE \ + ( \ + (0x17 << PADS_REFCLK_CFG_TERM_SHIFT) | \ + (0 << PADS_REFCLK_CFG_E_TERM_SHIFT) | \ + (0xa << PADS_REFCLK_CFG_PREDI_SHIFT) | \ + (0xf << PADS_REFCLK_CFG_DRVI_SHIFT) \ + ) + struct tegra_msi { struct msi_chip chip; DECLARE_BITMAP(used, INT_PCI_MSI_NR); @@ -808,11 +827,11 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie) value |= PADS_PLL_CTL_RST_B4SM; pads_writel(pcie, value, soc->pads_pll_ctl); - /* - * Hack, set the clock voltage to the DEFAULT provided by hw folks. - * This doesn't exist in the documentation. - */ - pads_writel(pcie, 0xfa5cfa5c, PADS_REFCLK_CFG0); + /* Configure the reference clock driver */ + value = PADS_REFCLK_CFG_VALUE | (PADS_REFCLK_CFG_VALUE << 16); + pads_writel(pcie, value, PADS_REFCLK_CFG0); + if (soc->num_ports > 2) + pads_writel(pcie, PADS_REFCLK_CFG_VALUE, PADS_REFCLK_CFG1); /* wait for the PLL to lock */ timeout = 300;