From: Lino Sanfilippo Date: Fri, 22 Jul 2016 21:09:15 +0000 (+0200) Subject: staging: slicoss: introduce register accessors that use register offsets X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b200da6744addf5c1ed7dbb8a70cfff8c4e2368e;p=linux-beck.git staging: slicoss: introduce register accessors that use register offsets Introduce accessor functions that read and write registers by using a register offset. This is in preparation to replace the register addressing by means of the slic_regs struct with an addressing by means of offsets. Signed-off-by: Lino Sanfilippo Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h index cc0afeeb68c1..08d9f5bda9fd 100644 --- a/drivers/staging/slicoss/slic.h +++ b/drivers/staging/slicoss/slic.h @@ -418,6 +418,7 @@ struct adapter { dma_addr_t phys_shmem; u32 isrcopy; __iomem struct slic_regs *slic_regs; + void __iomem *regs; unsigned char state; unsigned char linkstate; unsigned char linkspeed; @@ -487,6 +488,29 @@ struct adapter { struct slicnet_stats slic_stats; }; +static inline u32 slic_read32(struct adapter *adapter, unsigned int reg) +{ + return ioread32(adapter->regs + reg); +} + +static inline void slic_write32(struct adapter *adapter, unsigned int reg, + u32 val) +{ + iowrite32(val, adapter->regs + reg); +} + +static inline void slic_write64(struct adapter *adapter, unsigned int reg, + u32 val, u32 hiaddr) +{ + unsigned long flags; + + spin_lock_irqsave(&adapter->bit64reglock, flags); + slic_write32(adapter, SLIC_REG_ADDR_UPPER, hiaddr); + slic_write32(adapter, reg, val); + mmiowb(); + spin_unlock_irqrestore(&adapter->bit64reglock, flags); +} + #define UPDATE_STATS(largestat, newstat, oldstat) \ { \ if ((newstat) < (oldstat)) \ diff --git a/drivers/staging/slicoss/slichw.h b/drivers/staging/slicoss/slichw.h index 9723b4a104f7..f06450ea5ab7 100644 --- a/drivers/staging/slicoss/slichw.h +++ b/drivers/staging/slicoss/slichw.h @@ -289,6 +289,119 @@ struct slic_rspbuf { u32 pad2[4]; }; +/* Reset Register */ +#define SLIC_REG_RESET 0x0000 +/* Interrupt Control Register */ +#define SLIC_REG_ICR 0x0008 +/* Interrupt status pointer */ +#define SLIC_REG_ISP 0x0010 +/* Interrupt status */ +#define SLIC_REG_ISR 0x0018 +/* + * Header buffer address reg + * 31-8 - phy addr of set of contiguous hdr buffers + * 7-0 - number of buffers passed + * Buffers are 256 bytes long on 256-byte boundaries. + */ +#define SLIC_REG_HBAR 0x0020 +/* + * Data buffer handle & address reg + * 4 sets of registers; Buffers are 2K bytes long 2 per 4K page. + */ +#define SLIC_REG_DBAR 0x0028 +/* + * Xmt Cmd buf addr regs. + * 1 per XMT interface + * 31-5 - phy addr of host command buffer + * 4-0 - length of cmd in multiples of 32 bytes + * Buffers are 32 bytes up to 512 bytes long + */ +#define SLIC_REG_CBAR 0x0030 +/* Write control store */ +#define SLIC_REG_WCS 0x0034 +/* + * Response buffer address reg. + * 31-8 - phy addr of set of contiguous response buffers + * 7-0 - number of buffers passed + * Buffers are 32 bytes long on 32-byte boundaries. + */ +#define SLIC_REG_RBAR 0x0038 +/* Read statistics (UPR) */ +#define SLIC_REG_RSTAT 0x0040 +/* Read link status */ +#define SLIC_REG_LSTAT 0x0048 +/* Write Mac Config */ +#define SLIC_REG_WMCFG 0x0050 +/* Write phy register */ +#define SLIC_REG_WPHY 0x0058 +/* Rcv Cmd buf addr reg */ +#define SLIC_REG_RCBAR 0x0060 +/* Read SLIC Config*/ +#define SLIC_REG_RCONFIG 0x0068 +/* Interrupt aggregation time */ +#define SLIC_REG_INTAGG 0x0070 +/* Write XMIT config reg */ +#define SLIC_REG_WXCFG 0x0078 +/* Write RCV config reg */ +#define SLIC_REG_WRCFG 0x0080 +/* Write rcv addr a low */ +#define SLIC_REG_WRADDRAL 0x0088 +/* Write rcv addr a high */ +#define SLIC_REG_WRADDRAH 0x0090 +/* Write rcv addr b low */ +#define SLIC_REG_WRADDRBL 0x0098 +/* Write rcv addr b high */ +#define SLIC_REG_WRADDRBH 0x00a0 +/* Low bits of mcast mask */ +#define SLIC_REG_MCASTLOW 0x00a8 +/* High bits of mcast mask */ +#define SLIC_REG_MCASTHIGH 0x00b0 +/* Ping the card */ +#define SLIC_REG_PING 0x00b8 +/* Dump command */ +#define SLIC_REG_DUMP_CMD 0x00c0 +/* Dump data pointer */ +#define SLIC_REG_DUMP_DATA 0x00c8 +/* Read card's pci_status register */ +#define SLIC_REG_PCISTATUS 0x00d0 +/* Write hostid field */ +#define SLIC_REG_WRHOSTID 0x00d8 +/* Put card in a low power state */ +#define SLIC_REG_LOW_POWER 0x00e0 +/* Force slic into quiescent state before soft reset */ +#define SLIC_REG_QUIESCE 0x00e8 +/* Reset interface queues */ +#define SLIC_REG_RESET_IFACE 0x00f0 +/* + * Register is only written when it has changed. + * Bits 63-32 for host i/f addrs. + */ +#define SLIC_REG_ADDR_UPPER 0x00f8 +/* 64 bit Header buffer address reg */ +#define SLIC_REG_HBAR64 0x0100 +/* 64 bit Data buffer handle & address reg */ +#define SLIC_REG_DBAR64 0x0108 +/* 64 bit Xmt Cmd buf addr regs. */ +#define SLIC_REG_CBAR64 0x0110 +/* 64 bit Response buffer address reg.*/ +#define SLIC_REG_RBAR64 0x0118 +/* 64 bit Rcv Cmd buf addr reg*/ +#define SLIC_REG_RCBAR64 0x0120 +/* Read statistics (64 bit UPR) */ +#define SLIC_REG_RSTAT64 0x0128 +/* Download Gigabit RCV sequencer ucode */ +#define SLIC_REG_RCV_WCS 0x0130 +/* Write VlanId field */ +#define SLIC_REG_WRVLANID 0x0138 +/* Read Transformer info */ +#define SLIC_REG_READ_XF_INFO 0x0140 +/* Write Transformer info */ +#define SLIC_REG_WRITE_XF_INFO 0x0148 +/* Write card ticks per second */ +#define SLIC_REG_TICKS_PER_SEC 0x0170 + +#define SLIC_REG_HOSTID 0x1554 + struct slic_regs { u32 slic_reset; /* Reset Register */ u32 pad0; diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c index 577c2d2f4673..edae0f7d2ff6 100644 --- a/drivers/staging/slicoss/slicoss.c +++ b/drivers/staging/slicoss/slicoss.c @@ -2920,6 +2920,7 @@ static int slic_init_adapter(struct net_device *netdev, adapter->slotnumber = ((pcidev->devfn >> 3) & 0x1F); adapter->functionnumber = (pcidev->devfn & 0x7); adapter->slic_regs = memaddr; + adapter->regs = memaddr; adapter->irq = pcidev->irq; adapter->chipid = chip_idx; adapter->port = 0;