From: Chen-Yu Tsai Date: Wed, 11 May 2016 05:23:14 +0000 (+0800) Subject: ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b223d6242c372a81cca3bb81998f53d3b3e3fb70;p=linux-beck.git ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator This is the same issue fixed in commit dcf5341f0150 ("ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator"). Commit message copied: dc1sw is an on/off only regulator and as such it cannot have constraints. This is a limitation of the kernel regulator implementation which resolves supplies on the first regulator_get(), which is done after applying constraints, and applying the constrains will fail because it calls _regulator_get_voltage() and _regulator_do_set_voltage() both of which will fail on a switch regulator when there is no supply (yet). This causes registering of all axp22x regulators to fail with the following errors: [ 1.395249] vcc-lcd: failed to get the current voltage(-22) [ 1.405131] axp20x-regulator axp20x-regulator: Failed to register dc1sw [ 1.412436] axp20x-regulator: probe of axp20x-regulator failed with error -22 This commit removes the constrains on dc1sw / vcc-lcd fixing this problem. Note that dcdc1 itself is contrained to the exact same values, so this does not change anything. Cc: Hans de Goede Signed-off-by: Chen-Yu Tsai Cc: # 4.6 Acked-by: Maxime Ripard Signed-off-by: Olof Johansson --- diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index 360adfb1e9ca..d6ad6196a768 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -135,8 +135,6 @@ ®_dc1sw { regulator-name = "vcc-lcd-usb2"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; }; ®_dc5ldo {