From: Thara Gopinath <thara@ti.com>
Date: Wed, 18 Aug 2010 06:53:12 +0000 (+0530)
Subject: OMAP4: Smartreflex framework extensions
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b35cecf978e33bf8f4be0f36ffe00fe10f381c4a;p=linux-beck.git

OMAP4: Smartreflex framework extensions

This patch extends the smartreflex framework to support
OMAP4. The changes are minor like compiling smartreflex Kconfig
option for OMAP4 also, and a couple of OMAP4 checks in
the smartreflex framework.

The change in sr_device.c where new logic has to be introduced
for reading the efuse registers is due to the fact that in OMAP4
the efuse registers are 24 bit aligned. A __raw_readl will
fail for non-32 bit aligned address and hence the 8-bit read
and shift.

Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---

diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 52a05b336c08..77ecebf3fae2 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -153,7 +153,11 @@ static void sr_set_clk_length(struct omap_sr *sr)
 	struct clk *sys_ck;
 	u32 sys_clk_speed;
 
-	sys_ck = clk_get(NULL, "sys_ck");
+	if (cpu_is_omap34xx())
+		sys_ck = clk_get(NULL, "sys_ck");
+	else
+		sys_ck = clk_get(NULL, "sys_clkin_ck");
+
 	if (IS_ERR(sys_ck)) {
 		dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
 			__func__);
@@ -193,7 +197,7 @@ static void sr_set_regfields(struct omap_sr *sr)
 	 * file or pmic specific data structure. In that case these structure
 	 * fields will have to be populated using the pdata or pmic structure.
 	 */
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		sr->err_weight = OMAP3430_SR_ERRWEIGHT;
 		sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
 		sr->accum_data = OMAP3430_SR_ACCUMDATA;
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 9a3538fb633a..786d685c09a9 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -20,6 +20,7 @@
 
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
 #include <plat/omap_device.h>
 #include <plat/smartreflex.h>
@@ -51,7 +52,21 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 			GFP_KERNEL);
 
 	for (i = 0; i < count; i++) {
-		u32 v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
+		u32 v;
+		/*
+		 * In OMAP4 the efuse registers are 24 bit aligned.
+		 * A __raw_readl will fail for non-32 bit aligned address
+		 * and hence the 8-bit read and shift.
+		 */
+		if (cpu_is_omap44xx()) {
+			u16 offset = volt_data[i].sr_efuse_offs;
+
+			v = omap_ctrl_readb(offset) |
+				omap_ctrl_readb(offset + 1) << 8 |
+				omap_ctrl_readb(offset + 2) << 16;
+		} else {
+			 v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
+		}
 
 		nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
 		nvalue_table[i].nvalue = v;
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index f4e05134aafa..11bf9f991509 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -37,7 +37,7 @@ config OMAP_DEBUG_LEDS
 
 config OMAP_SMARTREFLEX
 	bool "SmartReflex support"
-	depends on ARCH_OMAP3 && PM
+	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
 	help
 	  Say Y if you want to enable SmartReflex.