From: Dmitri Belimov Date: Tue, 30 Mar 2010 06:02:17 +0000 (-0300) Subject: V4L/DVB: Fix default state Beholder H6 tuner X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b400f09246247e2c55b116bd7b71da4fb0cb19dc;p=linux-beck.git V4L/DVB: Fix default state Beholder H6 tuner The hybrid tuner FMD1216MEX_MK3 after cold start has disabled IF. This tuner has internal I2C switch. This switch switch I2C bus between DVB-T and IF part. Default state is DVB-T. When module saa7134 is load it can't find IF tda9887 and disable analog TV mode. Sets internal I2C switch of the tuner to IF by send special value to the tuner as for receive analog TV from low band. It can be usefule for other cards. I didn't set configure a tuner by a tuner model because this tuner can have different I2C address. May be we can do it later after discuss for more robust support a tuners. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index b937d4da3136..435f821b5921 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -7366,6 +7366,23 @@ int saa7134_board_init2(struct saa7134_dev *dev) } break; } + case SAA7134_BOARD_BEHOLD_H6: + { + u8 data[] = { 0x09, 0x9f, 0x86, 0x11}; + struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = data, + .len = sizeof(data)}; + + /* The tuner TUNER_PHILIPS_FMD1216MEX_MK3 after hardware */ + /* start has disabled IF and enabled DVB-T. When saa7134 */ + /* scan I2C devices it not detect IF tda9887 and can`t */ + /* watch TV without software reboot. For solve this problem */ + /* switch the tuner to analog TV mode manually. */ + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) + printk(KERN_WARNING + "%s: Unable to enable IF of the tuner.\n", + dev->name); + break; + } } /* switch() */ /* initialize tuner */