From: Martin Michlmayr Date: Thu, 5 Nov 2009 18:09:01 +0000 (+0000) Subject: [ARM] Kirkwood: Add MPP36 for QNAP TS-11x/TS-21x X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b421950cdc7d0ac900414aa582c5e35aeab921c0;p=linux-beck.git [ARM] Kirkwood: Add MPP36 for QNAP TS-11x/TS-21x MPP36 is used on the QNAP TS-11x/TS-21x devices to indicate how much RAM there is: it's high for 512 MB RAM (TS-x19) and low for 256 MB (TS-x10). While this may not be very useful, let's add it for completeness. Signed-off-by: Martin Michlmayr Signed-off-by: Nicolas Pitre --- diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index ec1a64f263d2..cb0f56dfd5ba 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -152,6 +152,7 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP14_UART1_RXD, /* PIC controller */ MPP15_GPIO, /* USB Copy button */ MPP16_GPIO, /* Reset button */ + MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ 0 };