From: John Youn Date: Tue, 17 Mar 2015 01:10:02 +0000 (-0700) Subject: usb: dwc2: pci: Correctly compile dwc2-pci as a module or built-in X-Git-Tag: v4.1-rc1~154^2~55^2~4 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b48cb02de37976ad2ebef201ad40aa40156f6daa;p=karo-tx-linux.git usb: dwc2: pci: Correctly compile dwc2-pci as a module or built-in The dwc2-pci driver should be compiled as a module when configured to do so. If the dwc2-pci is configured as a module but actually built-in, it can cause build errors due to the fact that the generic-phy will be allowed to compile as a module causing undefined references. Reported-by: Alan Cox Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile index 8f752679752a..f07b425eaff3 100644 --- a/drivers/usb/dwc2/Makefile +++ b/drivers/usb/dwc2/Makefile @@ -19,10 +19,8 @@ endif # mode. The PCI bus interface module will called dwc2_pci.ko and the platform # interface module will be called dwc2_platform.ko. -ifneq ($(CONFIG_USB_DWC2_PCI),) - obj-$(CONFIG_USB_DWC2) += dwc2_pci.o - dwc2_pci-y := pci.o -endif +obj-$(CONFIG_USB_DWC2_PCI) += dwc2_pci.o +dwc2_pci-y := pci.o obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o dwc2_platform-y := platform.o