From: Christoph Hellwig Date: Fri, 28 Oct 2005 20:07:41 +0000 (+0200) Subject: [SCSI] mptsas: support link error attributes X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b5141128027c53b8ca40736d969f75c9a1cdb64b;p=linux-beck.git [SCSI] mptsas: support link error attributes .. and the fusion part. I had to move around the debug functions around a little bit so they are below the transport class methods. Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 7de19a84dc74..6512027bc69a 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -123,6 +123,101 @@ struct mptsas_portinfo { struct mptsas_phyinfo *phy_info; }; + +#ifdef SASDEBUG +static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data) +{ + printk("---- IO UNIT PAGE 0 ------------\n"); + printk("Handle=0x%X\n", + le16_to_cpu(phy_data->AttachedDeviceHandle)); + printk("Controller Handle=0x%X\n", + le16_to_cpu(phy_data->ControllerDevHandle)); + printk("Port=0x%X\n", phy_data->Port); + printk("Port Flags=0x%X\n", phy_data->PortFlags); + printk("PHY Flags=0x%X\n", phy_data->PhyFlags); + printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate); + printk("Controller PHY Device Info=0x%X\n", + le32_to_cpu(phy_data->ControllerPhyDeviceInfo)); + printk("DiscoveryStatus=0x%X\n", + le32_to_cpu(phy_data->DiscoveryStatus)); + printk("\n"); +} + +static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0) +{ + __le64 sas_address; + + memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); + + printk("---- SAS PHY PAGE 0 ------------\n"); + printk("Attached Device Handle=0x%X\n", + le16_to_cpu(pg0->AttachedDevHandle)); + printk("SAS Address=0x%llX\n", + (unsigned long long)le64_to_cpu(sas_address)); + printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier); + printk("Attached Device Info=0x%X\n", + le32_to_cpu(pg0->AttachedDeviceInfo)); + printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate); + printk("Change Count=0x%X\n", pg0->ChangeCount); + printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo)); + printk("\n"); +} + +static void mptsas_print_phy_pg1(SasPhyPage1_t *pg1) +{ + printk("---- SAS PHY PAGE 1 ------------\n"); + printk("Invalid Dword Count=0x%x\n", pg1->InvalidDwordCount); + printk("Running Disparity Error Count=0x%x\n", + pg1->RunningDisparityErrorCount); + printk("Loss Dword Synch Count=0x%x\n", pg1->LossDwordSynchCount); + printk("PHY Reset Problem Count=0x%x\n", pg1->PhyResetProblemCount); + printk("\n"); +} + +static void mptsas_print_device_pg0(SasDevicePage0_t *pg0) +{ + __le64 sas_address; + + memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); + + printk("---- SAS DEVICE PAGE 0 ---------\n"); + printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle)); + printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle)); + printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot)); + printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address)); + printk("Target ID=0x%X\n", pg0->TargetID); + printk("Bus=0x%X\n", pg0->Bus); + printk("PhyNum=0x%X\n", pg0->PhyNum); + printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus)); + printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo)); + printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags)); + printk("Physical Port=0x%X\n", pg0->PhysicalPort); + printk("\n"); +} + +static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1) +{ + printk("---- SAS EXPANDER PAGE 1 ------------\n"); + + printk("Physical Port=0x%X\n", pg1->PhysicalPort); + printk("PHY Identifier=0x%X\n", pg1->Phy); + printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate); + printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate); + printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate); + printk("Owner Device Handle=0x%X\n", + le16_to_cpu(pg1->OwnerDevHandle)); + printk("Attached Device Handle=0x%X\n", + le16_to_cpu(pg1->AttachedDevHandle)); +} +#else +#define mptsas_print_phy_data(phy_data) do { } while (0) +#define mptsas_print_phy_pg0(pg0) do { } while (0) +#define mptsas_print_phy_pg1(pg1) do { } while (0) +#define mptsas_print_device_pg0(pg0) do { } while (0) +#define mptsas_print_expander_pg1(pg1) do { } while (0) +#endif + + /* * This is pretty ugly. We will be able to seriously clean it up * once the DV code in mptscsih goes away and we can properly @@ -200,91 +295,76 @@ static struct scsi_host_template mptsas_driver_template = { .use_clustering = ENABLE_CLUSTERING, }; -static struct sas_function_template mptsas_transport_functions = { -}; - -static struct scsi_transport_template *mptsas_transport_template; - -#ifdef SASDEBUG -static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data) +static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy) { - printk("---- IO UNIT PAGE 0 ------------\n"); - printk("Handle=0x%X\n", - le16_to_cpu(phy_data->AttachedDeviceHandle)); - printk("Controller Handle=0x%X\n", - le16_to_cpu(phy_data->ControllerDevHandle)); - printk("Port=0x%X\n", phy_data->Port); - printk("Port Flags=0x%X\n", phy_data->PortFlags); - printk("PHY Flags=0x%X\n", phy_data->PhyFlags); - printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate); - printk("Controller PHY Device Info=0x%X\n", - le32_to_cpu(phy_data->ControllerPhyDeviceInfo)); - printk("DiscoveryStatus=0x%X\n", - le32_to_cpu(phy_data->DiscoveryStatus)); - printk("\n"); + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + return ((MPT_SCSI_HOST *)shost->hostdata)->ioc; } -static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0) +static int mptsas_get_linkerrors(struct sas_phy *phy) { - __le64 sas_address; + MPT_ADAPTER *ioc = phy_to_ioc(phy); + ConfigExtendedPageHeader_t hdr; + CONFIGPARMS cfg; + SasPhyPage1_t *buffer; + dma_addr_t dma_handle; + int error; - memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); + hdr.PageVersion = MPI_SASPHY1_PAGEVERSION; + hdr.ExtPageLength = 0; + hdr.PageNumber = 1 /* page number 1*/; + hdr.Reserved1 = 0; + hdr.Reserved2 = 0; + hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; + hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY; - printk("---- SAS PHY PAGE 0 ------------\n"); - printk("Attached Device Handle=0x%X\n", - le16_to_cpu(pg0->AttachedDevHandle)); - printk("SAS Address=0x%llX\n", - (unsigned long long)le64_to_cpu(sas_address)); - printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier); - printk("Attached Device Info=0x%X\n", - le32_to_cpu(pg0->AttachedDeviceInfo)); - printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate); - printk("Change Count=0x%X\n", pg0->ChangeCount); - printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo)); - printk("\n"); -} + cfg.cfghdr.ehdr = &hdr; + cfg.physAddr = -1; + cfg.pageAddr = phy->identify.phy_identifier; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; /* read */ + cfg.timeout = 10; -static void mptsas_print_device_pg0(SasDevicePage0_t *pg0) -{ - __le64 sas_address; + error = mpt_config(ioc, &cfg); + if (error) + return error; + if (!hdr.ExtPageLength) + return -ENXIO; - memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); + buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, + &dma_handle); + if (!buffer) + return -ENOMEM; - printk("---- SAS DEVICE PAGE 0 ---------\n"); - printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle)); - printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle)); - printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot)); - printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address)); - printk("Target ID=0x%X\n", pg0->TargetID); - printk("Bus=0x%X\n", pg0->Bus); - printk("Parent Phy Num=0x%X\n", pg0->PhyNum); - printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus)); - printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo)); - printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags)); - printk("Physical Port=0x%X\n", pg0->PhysicalPort); - printk("\n"); -} + cfg.physAddr = dma_handle; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; -static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1) -{ - printk("---- SAS EXPANDER PAGE 1 ------------\n"); + error = mpt_config(ioc, &cfg); + if (error) + goto out_free_consistent; - printk("Physical Port=0x%X\n", pg1->PhysicalPort); - printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier); - printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate); - printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate); - printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate); - printk("Owner Device Handle=0x%X\n", - le16_to_cpu(pg1->OwnerDevHandle)); - printk("Attached Device Handle=0x%X\n", - le16_to_cpu(pg1->AttachedDevHandle)); + mptsas_print_phy_pg1(buffer); + + phy->invalid_dword_count = le32_to_cpu(buffer->InvalidDwordCount); + phy->running_disparity_error_count = + le32_to_cpu(buffer->RunningDisparityErrorCount); + phy->loss_of_dword_sync_count = + le32_to_cpu(buffer->LossDwordSynchCount); + phy->phy_reset_problem_count = + le32_to_cpu(buffer->PhyResetProblemCount); + + out_free_consistent: + pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, + buffer, dma_handle); + return error; } -#else -#define mptsas_print_phy_data(phy_data) do { } while (0) -#define mptsas_print_phy_pg0(pg0) do { } while (0) -#define mptsas_print_device_pg0(pg0) do { } while (0) -#define mptsas_print_expander_pg1(pg1) do { } while (0) -#endif + + +static struct sas_function_template mptsas_transport_functions = { + .get_linkerrors = mptsas_get_linkerrors, +}; + +static struct scsi_transport_template *mptsas_transport_template; static int mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)